RE (ARE)
SPECIFICATIONS
2.6 GHz SMALL
MICROWAVE RELAYS
RE RELAYS (ARE)
20.2
.795
11.2
.441
8.9
.350
mm inch
9.6
.378
11.2
.441
20.2
.795
RoHS Directive compatibility information
http://www.nais-e.com/
FEATURES
• Excellent high frequency
characteristics (to 2.6GHz)
• Surface-mount type also available
• Compact and slim size
Size: 20.2(L) × 11.2(W) × 8.9(H)* mm
.795(L) × .441(W) × .350(H) inch
*Surface-mount terminal is 9.6 mm
.378 inch size.
TYPICAL APPLICATIONS
1. Broadcasting and video markets.
• Digital broadcasting market
• STB/tuner market, etc.
2. Communications market
• Antennae switching
• All types of wireless devices
Type Frequency 900MHz 2.6GHz
Imped-
ance
50
V. S . W.R.
(Max.) 1.3 1.7
Insertion loss
(dB, Max.) 0.2 0.7
Isolation
(dB, Min.) 60 30
Imped-
ance
75
V. S . W.R.
(Max.) 1.2 1.5
Insertion loss
(dB, Max.) 0.2 0.5
Isolation
(dB, Min.) 60 30
Contact Coil (at 20°C, 68°F)
Characteristics
Remarks
* Specifications will vary with foreign standards certification ratings.
*1Measurement at same location as "Initial breakdown voltage" section.
*2Detection current: 10mA
*3Nominal operating voltage applied to the coil, excluding contact bounce time.
*4By resistive method, nominal voltage applied to the coil: Contact carrying power:
10W, at 2.6GHz, [Impedance 75, V.S.W.R. & 1.5] [Impedance 50, V.S.W.R. &
1.7]
*5Half-wave pulse of sine wave: 11ms, detection time: 10µs.
*6Half-wave pulse of sine wave: 6ms
*7Detection time: 10µs
*8Refer to 5. Conditions for operation, transport and storage conditions in NOTES
Arrangement 1 Form C
Contact material Gold
Initial contact resistance
(By voltage drop 10V DC 10mA) Max. 100m
Rating
Contact rating
1W (at 2.6 GHz
[Impedance 75 ,
V. S.W.R. Max.1.5]
[Impedance 50 ,
V. S.W.R. Max.1.7])
10mA 24V DC
(resistive load)
Contact carrying power
10W (at 2.6GHz
[Impedance 75 ,
V. S.W.R. Max.1.5]
[Impedance 50 ,
V. S.W.R. Max.1.7])
Max. switching voltage 30 V DC
Max. switching current 0.5 A DC
High frequency
characteristics
(Impedance
75)
(Initial)
V. S . W.R. Max. 1.2 (to 900MHz)
Max. 1.5 (to 2.6GHz)
Insertion loss Max. 0.2dB (to 900MHz)
Max. 0.5dB (to 2.6GHz)
Isolation Min. 60dB (to 900MHz)
Min. 30dB (to 2.6GHz)
High frequency
characteristics
(Impedance
50)
(Initial)
V. S . W.R. Max. 1.3 (to 900MHz)
Max. 1.7 (to 2.6GHz)
Insertion loss Max. 0.2dB (to 900MHz)
Max. 0.7dB (to 2.6GHz)
Isolation Min. 60dB (to 900MHz)
Min. 30dB (to 2.6GHz)
Expected life
(min.
operations)
Mechanical (at 180 cpm) 106
Electri-
cal
1W, 2.6GHz,
[Impedance 75,
V. S . W.R. & 1.5]
[Impedance 50,
V. S . W.R. & 1.7]
3×105
10mA 24V DC
(resistive load)
(at 20cpm)
3×105
Nominal operating power 200 mW
Initial insulation resistance*1Min. 100 M (at 500 V DC)
Initial
breakdown
voltage*2
Between open contacts 500 Vrms
Between contact and coil 1,000 Vrms
Between contact and
ground terminal 500 Vrms
Operate time*3 (at 20°C) Max. 10ms
Release time (without diode)*3 (at 20°C) Max. 5ms
Temperature rise (at 20°C)*4Max. 60°C
Shock resistance Functional*5Min. 500 m/s2{50 G}
Destructive*6Min. 1,000 m/s2{100 G}
Vibration resistance
Functional*710 to 55 Hz at double
amplitude of 3 mm
Destructive 10 to 55 Hz at double
amplitude of 5 mm
Conditions for operation,
transport and storage*8
(Not freezing and condensing
at low temperature)
Ambient
temp.
–40°C to 70°C
–40°F to 158°F
Humidity 5 to 85% R.H.
Unit weight Approx. 5 g .18 oz
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
RE (ARE)
ORDERING INFORMATION
TYPES AND COIL DATA (at 20°C 68°F)
• Single side stable type (Impedance 50)
• Packing of standard PC board terminal: 50 pcs. in an inner package (carton); 500 pcs. in an outer package.
• Packing of surface-mount terminal: 25 pcs. in an inner package (tube); 200 pcs. in an outer package.
• Packing of surface-mount terminal: 400 pcs. in an inner package (tape and reel); 800 pcs. in an outer package.
• Single side stable type (Impedance 75)
• Packing of standard PC board terminal: 50 pcs. in an inner package (carton); 500 pcs. in an outer package.
• Packing of surface-mount terminal: 25 pcs. in an inner package (tube); 200 pcs. in an outer package.
• Packing of surface-mount terminal: 400 pcs. in an inner package (tape and reel); 800 pcs. in an outer package.
DIMENSIONS mm inch
Standard
PC board
terminal
Surface-mount
terminal
Nominal
voltage,
V DC
Pick-up voltage,
V DC (max.)
(initial)
Drop-out
voltage, V DC
(min.)(initial)
Coil resistance,
(±10%)
Nominal
operating current,
mA (±10%)
Nominal
operating
power, mW
Max. allowable
voltage, V DC
(at 60°C)
ARE1003 ARE10A03 3 2.25 0.3 45 66.7 200 3.3
ARE104H ARE10A4H 4.5 3.375 0.45 101 44.4 200 4.95
ARE1006 ARE10A06 6 4.5 0.6 180 33.3 200 6.6
ARE1009 ARE10A09 9 6.75 0.9 405 22.2 200 9.9
ARE1012 ARE10A12 12 9 1.2 720 16.7 200 13.2
ARE1024 ARE10A24 24 18 2.4 2,880 8.3 200 26.4
Standard
PC board
terminal
Surface-mount
terminal
Nominal
voltage,
V DC
Pick-up voltage,
V DC (max.)
(initial)
Drop-out
voltage, V DC
(min.)(initial)
Coil resistance,
(±10%)
Nominal
operating current,
mA (±10%)
Nominal
operating
power, mW
Max. allowable
voltage, V DC
(at 60°C)
ARE1303 ARE13A03 3 2.25 0.3 45 66.7 200 3.3
ARE134H ARE13A4H 4.5 3.375 0.45 101 44.4 200 4.95
ARE1306 ARE13A06 6 4.5 0.6 180 33.3 200 6.6
ARE1309 ARE13A09 9 6.75 0.9 405 22.2 200 9.9
ARE1312 ARE13A12 12 9 1.2 720 16.7 200 13.2
ARE1324 ARE13A24 24 18 2.4 2,880 8.3 200 26.4
Contact arrangement Operating function
1: 1 Form C 0:
3:
Single side stable type
(Impedance 50)
Single side stable type
(Impedance 75)
Terminal shape
Nil:
A:
Standard PC board terminal
Surface-mount terminal
Coil voltage (DC)
03:
4H:
06:
09:
12:
24:
3 V
4.5 V
6 V
9 V
12 V
24 V
Packing style
Nil:
Z:
Carton packing
(Standard PC board terminal only)
Tube packing
(Surface-mount terminal only)
Tape and reel packing
(picked from 12/13/14 pin side)
1AREEx.
Note: Tape and reel packing symbol “-Z” is not marked on the relay.
“X type tape and reel packing (picked from 8/9/10/11/12/13/14-pin side) is also available.
Suffix “X” instead of “Z”.
1. Standard PC board terminal (75, 50 type)
General tolerance: ±0.3 ±.012
2.54
.100
0.5
.020
(2.09)
(.082)
7.62
.300
(1.49)
(.059)
Stand off
11.2
.441
8.6
.339
0.3
.012
3.0
.118 0.3
.012
0.3
.012
20.2
.795
Schematic (Bottom view)
(Deenergized condition)
NC
Direction indication COM NO
891011121314
71
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
RE (ARE)
REFERENCE DATA
2. Surface mount terminal
• 75 type
General tolerance: ±0.3 ±.012
20.2
.795
2.54
.100
0.5
.020
(2.09)
(.082)
7.62
.300
(1.49)
(.059)
11.2
.441
(0.7)
(.028)
(1.3)
(.511)
8.6
.339
0.3
.012
9.6
.378
13.2±0.5
.520±.020
0.3
.012 0.3
.012
Schematic (Top view)
(Deenergized condition)
NOCOMNC
17
811 10 9121314
Direction indication
mm inch
• 50 type
General tolerance: ±0.3 ±.012
(2.09)
(.082)
7.62
.300
(1.49)
(.059)
9.6
.378
0.3
.012 0.3
.012
8.6
.339
0.3
.012
11.2
.441
0.5 .020
4.12 .162
0.5 .020
4.12 .162
1.04 .041 1.04 .041
(1.3)
(.511)
13.2
.520
±0.5
±.020
(0.7)
(.028)
1.04
.041 1.04
.041
0.5
.020
3.5 .138
14.74 .580
20.2 .795 Schematic (Top view)
(Deenergized condition)
8914 13 12 11 10
7
1
NOCOMNC
Direction indication
1-(1). High frequency characteristics (Impedance 75) (Standard PC board terminal)
V.S.W.R. characteristics • Insertion loss characteristics • Isolation characteristics
1
1.9
2.0
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
900MHz 3GHz
COM-NC
COM-NO
Frequency
V.S.W.R.
1.0
0.1
0
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
900MHz 3GHz
COM-NC
COM-NO
Frequency
Insertion loss, dB
100
10
0
20
30
40
50
60
70
80
90
900MHz 3GHz
COM-NO
COM-NC
Frequency
Isolation, dB
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
RE (ARE)
NOTES
1-(2). High frequency characteristics (Impedance 50) (Standard PC board terminal)
V.S.W.R. characteristics • Insertion loss characteristics • Isolation characteristics
1
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
900MHz 3GHz
COM-NC
COM-NO
V.S.W.R.
Frequency
1.0
0.1
0
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
900MHz 3GHz
COM-NC
COM-NO
Insertion loss, dB
Frequency
100
10
0
20
30
40
50
60
70
80
90
900MHz 3GHz
COM-NO
COM-NC
Isolation, dB
Frequency
1. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different.
2. Cleaning
For automatic cleaning, the boiling
method is recommended. Avoid
ultrasonic cleaning which subjects the
relays to high frequency vibrations, which
may cause the contacts to stick.
It is recommended that alcoholic solvents
be used.
3. Soldering
1) The manual soldering shall be
performed under following condition.
Max. 260°C 500°F 10s
Max. 350°C 662°F 3s
The affect of the PCB on the relay will
differ depending on the type of PCB
used. Please verify the type of PCB to be
used.
Preheat according to the following
conditions.
Soldering should be done at 260±5°C
500±5°F within 6 s.
2) In case of automatic soldering, the
following conditions should be observed
(Surface-mount terminal)
(1) Position of measuring temperature
(2) IR (infrared reflow) soldering method
Temperature rise of relay itself may vary
according to the mounting level or the
heating method of reflow equipment.
Therefore, please set the temperature of
soldering portion of relay terminal and
the top surface of the relay case not to
exceed the above mentioned soldering
condition.
It is recommended to check the
temperature rise of each portion under
actual mounting condition before use.
4. Packing style
1) Tape dimensions
2) Dimensions of plastic reel
5. Conditions for operation, transport
and storage conditions
1) Ambient temperature, humidity, and
atmospheric pressure during usage,
transport, and storage of the relay:
(1) Temperature:
–40 to +70°C –40 to +158°F
(2) Humidity: 5 to 85% RH
(Avoid freezing and condensation.)
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
(3) Atmospheric pressure: 86 to 106 kPa
Temperature and humidity range for
usage, transport, and storage:
2) Condensation
Condensation forms when there is a
sudden change in temperature under
high temperature and high humidity
conditions. Condensation will cause
deterioration of the relay insulation.
3) Freezing
Condensation or other moisture may
freeze on the relay when the temperature
is lower than 0°C 32°F. This causes
problems such as sticking of movable
parts or operational time lags.
4) Low temperature, low humidity
environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low
humidity environment for long periods of
time.
Temperature 120°C 248°F or less
Time Within 2 minute
B
1.0mm .039inch
A: Surface of PC board where relay is mounted.
B: Above the PC board surface.
A
T1
T2
T3
T4
T5
t1t3t4t5t2
A: B:
t2 - t1 = 80 to 120 s
t5 - t3 = 30 to 40 s
t4 = 170 to 190 s
T1=150°C 302°F
T2=160°C 320°F
T3=183°C 361°F
T4=245°C 473°F
T5=270°C 518°F
Tape coming out direction
Relay polarity bar
44±0.3
1.732±.012
2.0±0.15
.079±.006
40.4
1.591
20.2
.795
1.75
.069 0.4
.016
4
.157
13.85
.545
20.0
.787
1.5 .059
1.7
.067
R0.75
.030
20.75
.817
10.6+0.2
0.3
.417+.008
.012
RE Relay
1.5+0.1
0 dia..059+.004
0
380±0.2
14.961±.008
21±0.8 dia.
.827±.031 dia.
13±0.2 dia.
.512±.008 dia.
2.0±0.5
.079±.020
80±0.1
3.150±.004
Max. 50.5
1.988
44.4+0.2
0
1.748+.008
0
;;
;;;;
;;;;;;
;;;;;;;;
;;;;;;;;;;
;;;;;;;;;;
;;;;;;;;;
;;;;;;;;
;;;;;;
;;;;
;;
Humidity, %RH
Temperature, °C °F
Tolerance range
85
5
0
+32
70
+158
–40
–40
(Avoid freezing
when used at
temperatures lower
than 0°C 32°F
(Avoid
condensation
when used at
temperatures higher
than 0°C 32°F
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.