W2CBW003 - Specifications TM W2CBW003 - 802.11 b/g +Bluetooth System-in-Package The W2CBW003 is a complete 802.11 b/g plus Bluetooth v2.0 + EDR radio solution based on the industry standard Marvell 8686 and Cambridge Silicon Radio architectures. Designed for handheld or portable warehousing/logistics, medical, consumer and industrial applications, it is a complete WiFi /BTsolution that includes an LDO for single rail operation, all crystals,all filtering, local memory for MAC address storage, and diagnostics capability. A full array of certifications have been performed on this device, making the certification process for the final systems design much easier and less costly. Full driver support is available for most OSs for the Marvell PXA family processors, as well as many other ARM-9 based processors using a Linux OS. Package Dimensions Security - 12mm (L) x 12mm(W) x 1.6mm(H) - WEP,TKIP, WPA and WPA2, AES/CCMP per 802.11 i Package Type Applications - Warehousing and logistics handhelds - Automotive aftermarket - Medical equipment - Industrial handhelds - M2M applications - POS terminals - Internet-enabled consumer devices - VoFi and other smartphones - WiFi enabled security cameras - 100-pin BGA, 1 mm pitch W2CBW003-TR -WiFi/BT SiP, Tape and Reel W2CBW003-T - WiFi /BT SiP, Tray - 802.11g: OFDM Power Ratings - 802.11b: DSSS/CCK - Supply Voltage : 3.3VDC, regulated to 1.5V Baseband Modulation - BT - Peak Current: 275 mA (continuous transmit, 802.11g and BT) - IEEE Power Save Mode: 10 mA - Standby mode (both radios): 30 mA - Deep Sleep Mode: 2mA - v2.0: GFSK - Bluetooth EDR: /4 DQPSK,8DPSK Receiver Sensitivity - BT - 1 Mb/s @ -84 dBm GFSK Temperature Range - Operating: -20 C to + 75 C Ordering Information Baseband Modulation - WiFi - Storage: -40 C to + 85 C - Humidity: 5% to 95%, Non-condensing - 2 Mb/s @ -87 dBm /4 DQPSK - 3 Mb/s @ -80 dBm 8DPSK Receiver Sensitivity - WiFI - 54 Mb/s @ -74 dBm OFDM W2CBW003-001: Designates UART BT Int Data Rates W2CBW003-SAM - WiFi/BT SiP Sample Pack -CCK: 1,2,5.5, and 11Mb/s W2CBW003-DEV - WiF/BT SiP Evaluation Kit -OFDM: 6,9,12,18,24,36,48,and 54 Mb/s (Note: please soecify GSPI or SDIO interface - BT v2.0: up to 1Mbps will be used) - BT EDR: 2,3 Mbps - 6Mb/s @ -90 dBm OFDM - 11Mb/s @ -88 dBm CCK - 1Mb/s @ -90 dBm DSSS Quality of Service - 802.11 e EDCF Interfaces - WiFi Features Copyright 2008, Wi2Wi Inc. - Small form factor SiP solution, 12mm x 12mm x1.6mm, 100 Pin LGA, 1mm pitch - Low power consumption and power save mode - Full support for 802.11 e(QOS) and 802.11i (Security) - Integrated RF-friendly LDO for single rail operation - Integrated PA, EEPROM, Balun, and clocking - Optimized front-end design for receive sensitivity, plus full coexistence support - Full driver support for popular OSs for the Marvell PXA processor family, Linux support for many other ARM-9 based processors - Includes both an SDIO and a GSPI interface for WiFi, and a USB and UART interface for BT - RoHS compliant Wi2Wi Inc. 2107 N First Street Ste 540, San Jose, CA 95131 - 7 GPIOs for WiFi, 2 GPIOs for BT USA Tel: +1 408 416 4000 FAX: +1 408 416 4201 www.wi2wi.com - SDIO 1 bit and 4 bit, GSPI Host Processors/OS With Driver Support Interfaces - BT - Marvell PXA Family - most OSs - USB (default) or UART - Freescale i.MX21 and 31 - Linux OS, SDIO - Samsung SC2443, 2412 - Linux (SDIO), WinCE Transmit Power WinMobile (GSPI) - +15dBm typical for both 802.11 b and g - X86 - Vista, XP, and Linux - BT v 2.0: +3dBm, EDR: -1dBm - Please contact your Wi2Wi sales rep if your processor is not listed! Copyright 2008, Wi2Wi Inc. Wi2Wi Inc. 2107 N First Street Ste 540, San Jose, CA 95131 USA Tel: +1 408 416 4000 FAX: +1 408 416 4201 www.wi2wi.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Wi2Wi: W2CBW003C-TR W2CBW003C-T W2CBW003C-001 W2CBW003C-002 W2CBW003C-003