SPEC NO: DSAG0214 REV NO: V.6 DATE: APR/13/2009 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: S.M.Wu ERP: 1352000349
SURFACE MOUNT DISPLAY
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: ACDA02-41PBWA/A-F01 Blue
Features
z0.2 inch digit height.
zLow current operation.
zExcellent character appearance.
zMechanically rugged.
zPackage :300pcs / reel.
zGray face, white segment.
zMoisture sensitivity level : level 4.
zRoHS compliant.
Description
The Blue source color devices are made with InGaN
on SiC Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
3.The gap between the reflector and PCB shall not exceed 0.25mm.
BLUE
SPEC NO: DSAG0214 REV NO: V.6 DATE: APR/13/2009 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: S.M.Wu ERP: 1352000349
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA
Min. Typ.
ACDA02-41PBWA/A-F01 Blue (InGaN) WHITE DIFFUSED 1200 5000 Common Anode, Rt.
Hand Decimal.
Description
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Blue 468 nm IF=20mA
λD [1] Dominant Wavelength Blue 470 nm IF=20mA
Δλ1/2 Spectral Line Half-width Blue 21 nm IF=20mA
C Capacitance Blue 100 pF VF=0V;f=1MHz
VF [2] Forward Voltage Blue 3.2 4.0 V IF=20mA
IR Reverse Current Blue 10 uA VR=5V
Parameter Blue Units
Power dissipation 120 mW
DC Forward Current 30 mA
Peak Forward Current [1] 100 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
SPEC NO: DSAG0214 REV NO: V.6 DATE: APR/13/2009 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: S.M.Wu ERP: 1352000349
Blue ACDA02-41PBWA/A-F01
SPEC NO: DSAG0214 REV NO: V.6 DATE: APR/13/2009 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: S.M.Wu ERP: 1352000349
ACDA02-41PBWA/A-F01
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.15)
Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAG0214 REV NO: V.6 DATE: APR/13/2009 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: S.M.Wu ERP: 1352000349
PACKING & LABEL SPECIFICATIONS ACDA02-41PBWA/A-F01
