SFT2369A2 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Dual Microminiature Package 100 mA 15 Volts Dual NPN Transistor DESIGNER'S DATA SHEET Part Number / Ordering Information 1/ SFT2369A2 __ __ Screening 2/ __= Commercial TX= TX Level TXV= TXV Level S= S Level Package GW= Gullwing Features: * * * * * High Speed Switching Transistor Suitable in chopper, UHF and RF application Multiple Devices Reduce Board Space Replacement for 2N2369AU TX, TXV, S-Level Screening Available 2/ Maximum Ratings Symbol Value Units Collector - Emitter Voltage VCEO 15 Volts Collector - Base Voltage VCBO 40 Volts Emitter - Base Voltage VEBO 4.5 Volts IC 100 mA PD 360 500 mW TOP & Tstg -65 to +200 C RJ-PCB 350 C/W Continuous Collector Current Per Device Total Power Dissipation @ TA= 25C Operating & Storage Temperature Maximum Thermal Resistance (Junction to PCB) Gullwing (GW) 2x .050 (=.100) .015 3x .015 .015.010 PIN 6 PIN 4 PIN 4 6x .010 PIN 6 6x .030 SSDI 5x R.018 .125 .034 .025 PIN 3 PIN 3 PIN 1 .350 .010 .193 PIN 1 .107 .040 .010 Tolerances: .xx .01 .xxx .005 .107 .010 .130 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. 6x R.010 .033 .035 DATA SHEET #: TR0045B DOC SFT2369A2 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Electrical Characteristic 4/ IC= 10 mA Collector - Emitter Sustaining Voltage Collector Cutoff Current VCE= 20 V, VBE= 0 V VCE= 10 V, VBE= 0.25 V, TA= 125C VCB= 32 V VCB= 40 V VCB= 20 V, TA= 150C VEB= 4.0 V Emitter Cutoff Current VEB= 4.5 V DC Forward Current Transfer Ratio 5/ VCE= 0.35 V, IC= 10 mA VCE= 0.40 V, IC= 30 mA VCE= 1.0 V, IC= 10 mA VCE= 1.0 V, IC= 100 mA VCE= 1.0 V, IC= 10 mA, TA= -55C Collector - Emitter Saturation Voltage 5/ IC= 10 mA, IB= 1.0 mA IC= 30 mA, IB= 3.0 mA IC= 100 mA, IB= 10 mA IC= 10 mA, IB= 1.0 mA, TA= 125C 5/ Base - Emitter Saturation Voltage IC= 10 mA, IB= 1.0 mA IC= 30 mA, IB= 3.0 mA IC= 100 mA, IB= 10 mA IC= 10 mA, IB= 1.0 mA, TA= -55C IC= 10 mA, IB= 1.0 mA, TA= 125C Collector Cutoff Current Frequency Transition Min Max Units BVCEO 15 -- Volts ICEX -- 0.4 30 A ICBO -- IEBO -- HFE VCE(Sat) VBE(Sat) 0.2 10 30 0.25 10 A A 40 30 40 20 20 -- -- -- -- 0.7 -- 0.8 -- 0.59 120 120 120 120 -- 0.20 0.25 0.45 0.30 0.85 0.9 1.2 1.02 -- Volts Volts VCE= 20V, IC= 20mA, f= 100 MHz fT 500 1000 MHz VCE= 5 V, f= 1 MHz cob -- 4.0 pF VCE= 0.5 V, f= 1 MHz cib -- 5.0 pF Test Circuit per MIL-PRF-19500/317 ton toff ts -- -- 12 18 13 ns Output Capacitance Input Capacitance Switching Times Symbol NOTES: 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ For Package Outlines Contact Factory. 4/ Unless Otherwise Specified, All Electrical Characteristics @ 25C. 5/ Pulse Test: Pulse Width= 300sec, Duty Cycle= 2% PIN ASSIGNMENT Available Part Numbers: SFT2369A2GW Package GW NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Pin 1 Collector1 Pin 2 Base1 Pin 3 Emitter1 DATA SHEET #: TR0045B Pin 4 Collector2 Pin 5 Base2 Pin 6 Emitter2 DOC