IRFZ24S, IRFZ24L, SiHFZ24S, SiHFZ24S Vishay Siliconix Power MOSFET FEATURES PRODUCT SUMMARY VDS (V) RDS(on) () VGS = 10 V 0.10 Qg (Max.) (nC) 25 Qgs (nC) 5.8 Qgd (nC) 11 Configuration I2PAK * Halogen-free According to IEC 61249-2-21 Definition * Advanced Process Technology * Surface Mount (IRFZ24S, SiHFZ24S) * Low-ProfileThrough-Hole (IRFZ24L, SiHFZ24L) * 175 C Operating Temperature * Fast Switching * Compliant to RoHS Directive 2002/95/EC 60 DESCRIPTION Single D2PAK (TO-262) G G D S Third generation Power MOSFETs from Vishay utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that Power MOSFETs are well known for, provides the designer with an extremely efficient and reliable device for use in a wide variety of applications. The D2PAK is a surface mount power package capable of accommodating die size up to HEX-4. It provides the highest power capability and the last lowest possible on-resistance in any existing surface mount package. The D2PAK is suitable for high current applications because of its low internal connection resistance and can dissipate up to 2.0 W in a typical surface mount application. The through-hole version (IRFZ24L, SiHFZ24L) is available for low-profile applications. D (TO-263) G D S S N-Channel MOSFET ORDERING INFORMATION Package Lead (Pb)-free and Halogen-free Lead (Pb)-free D2PAK (TO-263) SiHFZ24S-GE3 IRFZ24SPbF SiHFZ24S-E3 D2PAK (TO-263) SiHFZ24STRR-GE3 - I2PAK (TO-262) IRFZ24LPbF SiHFZ24L-E3 Note a. See device orientation. ABSOLUTE MAXIMUM RATINGS (TC = 25 C, unless otherwise noted) PARAMETER Drain-Source Voltage Gate-Source Voltage Continuous Drain Current SYMBOL VDS VGS VGS at 10 V TC = 25 C TC = 100 C Pulsed Drain Currenta, e Linear Derating Factor Single Pulse Avalanche Energyb, e Maximum Power Dissipation Peak Diode Recovery dV/dtc, e Operating Junction and Storage Temperature Range Soldering Recommendations (Peak Temperature) ID IDM EAS TC = 25 C TA = 25 C PD dV/dt TJ, Tstg for 10 s LIMIT 60 20 17 12 68 0.40 100 60 3.7 4.5 - 55 to + 175 300d UNIT V A W/C mJ W V/ns C Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. VDD = 25 V, starting TJ = 25 C, L = 400 H, Rg = 25 , IAS = 17 A (see fig. 12). c. ISD 17 A, dI/dt 140 A/s, VDD VDS, TJ 175 C. d. 1.6 mm from case. e. Uses IRFZ24, SiHFZ24 data and test conditions. * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 90366 S11-1063-Rev. C, 30-May-11 www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFZ24S, IRFZ24L, SiHFZ24S, SiHFZ24S Vishay Siliconix THERMAL RESISTANCE RATINGS SYMBOL TYP. MAX. Maximum Junction-to-Ambient (PCB Mounted, Steady-State)a PARAMETER RthJA - 40 Maximum Junction-to-Case (Drain) RthJC - 2.5 UNIT C/W Note a. When mounted on 1" square PCB (FR-4 or G-10 material). SPECIFICATIONS (TJ = 25 C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage VDS Temperature Coefficient Gate-Source Threshold Voltage VDS VGS = 0, ID = 250 A 60 - - V VDS/TJ Reference to 25 C, ID = 1 mAc - 0.061 - V/C VGS(th) VDS = VGS, ID = 250 A 2.0 - 4.0 V Gate-Source Leakage IGSS VGS = 20 V - - 100 nA Zero Gate Voltage Drain Current IDSS VDS = 60 V, VGS = 0 V - - 25 VDS = 48 V, VGS = 0 V, TJ = 150 C - - 250 - - 0.10 5.5 - - S - 640 - - 360 - - 79 - - - 25 Drain-Source On-State Resistance Forward Transconductance RDS(on) gfs ID = 10 Ab VGS = 10 V VDS = 25 V, ID = 10 Ad A Dynamic Input Capacitance Ciss Output Capacitance Coss VGS = 0 V, VDS = 25 V, f = 1.0 MHz, see fig. 5d Reverse Transfer Capacitance Crss Total Gate Charge Qg Gate-Source Charge Qgs - - 5.8 Gate-Drain Charge Qgd - - 11 Turn-On Delay Time td(on) - 13 - tr - 58 - - 25 - - 42 - - 7.5 - - - 17 - - 68 Rise Time Turn-Off Delay Time td(off) Fall Time tf Internal Source Inductance LS VGS = 10 V ID = 17 A, VDS = 48 V, see fig. 6 and 13b, c VDD = 30 V, ID = 17 A, Rg = 18 , RD = 1.7 , see fig. 10b, c Between lead, and center of die contact pF nC ns nH Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current Pulsed Diode Forward Currenta Body Diode Voltage IS ISM VSD Body Diode Reverse Recovery Time trr Body Diode Reverse Recovery Charge Qrr Forward Turn-On Time ton MOSFET symbol showing the integral reverse p - n junction diode D A G TJ = 25 C, IS = 17 A, VGS = 0 S Vb TJ = 25 C, IF = 17 A, dI/dt = 100 A/sb, c - - 1.5 V - 88 180 ns - 290 640 C Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD) Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. Pulse width 300 s; duty cycle 2 %. c. Uses IRFZ24/SiHFZ24 data and test conditions. www.vishay.com 2 Document Number: 90366 S11-1063-Rev. C, 30-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFZ24S, IRFZ24L, SiHFZ24S, SiHFZ24S Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) Fig. 1 - Typical Output Characteristics, TC = 25 C Fig. 3 - Typical Transfer Characteristics Fig. 2 - Typical Output Characteristics, TC = 175 C Fig. 4 - Normalized On-Resistance vs. Temperature Document Number: 90366 S11-1063-Rev. C, 30-May-11 www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFZ24S, IRFZ24L, SiHFZ24S, SiHFZ24S Vishay Siliconix Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage www.vishay.com 4 Fig. 7 - Typical Source-Drain Diode Forward Voltage Fig. 8 - Maximum Safe Operating Area Document Number: 90366 S11-1063-Rev. C, 30-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFZ24S, IRFZ24L, SiHFZ24S, SiHFZ24S Vishay Siliconix RD VDS VGS D.U.T. Rg + - VDD 10 V Pulse width 1 s Duty factor 0.1 % Fig. 10a - Switching Time Test Circuit VDS 90 % 10 % VGS td(on) Fig. 9 - Maximum Drain Current vs. Case Temperature td(off) tf tr Fig. 10b - Switching Time Waveforms Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case L Vary tp to obtain required IAS VDS VDS tp VDD Rg D.U.T. + - I AS V DD VDS 10 V tp 0.01 W Fig. 12a - Unclamped Inductive Test Circuit Document Number: 90366 S11-1063-Rev. C, 30-May-11 IAS Fig. 12b - Unclamped Inductive Waveforms www.vishay.com 5 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFZ24S, IRFZ24L, SiHFZ24S, SiHFZ24S Vishay Siliconix Fig. 12c - Maximum Avalanche Energy vs. Drain Current Current regulator Same type as D.U.T. 50 k QG 10 V 12 V 0.2 F 0.3 F QGS QGD + D.U.T. VG - VDS VGS 3 mA Charge IG ID Current sampling resistors Fig. 13a - Basic Gate Charge Waveform www.vishay.com 6 Fig. 13b - Gate Charge Test Circuit Document Number: 90366 S11-1063-Rev. C, 30-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFZ24S, IRFZ24L, SiHFZ24S, SiHFZ24S Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit + D.U.T. Circuit layout considerations * Low stray inductance * Ground plane * Low leakage inductance current transformer + - - Rg * * * * + dV/dt controlled by Rg Driver same type as D.U.T. ISD controlled by duty factor "D" D.U.T. - device under test + - VDD Driver gate drive P.W. Period D= P.W. Period VGS = 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage Inductor current VDD Body diode forward drop Ripple 5 % ISD Note a. VGS = 5 V for logic level devices Fig. 14 - For N-Channel Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?90366. Document Number: 90366 S11-1063-Rev. C, 30-May-11 www.vishay.com 7 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information Vishay Siliconix TO-220AB MILLIMETERS A E F D H(1) Q OP 3 2 L(1) 1 *M DIM. MIN. MAX. MIN. MAX. A 4.25 4.65 0.167 0.183 b 0.69 1.01 0.027 0.040 b(1) 1.20 1.73 0.047 0.068 c 0.36 0.61 0.014 0.024 D 14.85 15.49 0.585 0.610 E 10.04 10.51 0.395 0.414 e 2.41 2.67 0.095 0.105 e(1) 4.88 5.28 0.192 0.208 0.055 F 1.14 1.40 0.045 H(1) 6.09 6.48 0.240 0.255 J(1) 2.41 2.92 0.095 0.115 0.552 L 13.35 14.02 0.526 L(1) 3.32 3.82 0.131 0.150 OP 3.54 3.94 0.139 0.155 Q 2.60 3.00 0.102 0.118 ECN: X10-0416-Rev. M, 01-Nov-10 DWG: 5471 b(1) L INCHES Note * M = 1.32 mm to 1.62 mm (dimension including protrusion) Heatsink hole for HVM C b e J(1) e(1) Document Number: 71195 Revison: 01-Nov-10 www.vishay.com 1 AN826 Vishay Siliconix RECOMMENDED MINIMUM PADS FOR D2PAK: 3-Lead 0.420 0.355 0.635 (16.129) (9.017) (10.668) 0.145 (3.683) 0.135 (3.429) 0.200 0.050 (5.080) (1.257) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index Document Number: 73397 11-Apr-05 www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000