3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering inform at io n call
800-225-5373
3M™ HDC Plug
.100″ Right Angle, PCB, Solder Tail HDC Series
Physical
Electrical
Environmental
Insulation
Material: Glass Filled Thermoplastic (L CP)
Flammability: UL 94V-0
Color: Black
Contact
Material Copper Alloy
Plating
Underplating: 50 μ″ [ 1.27 μm ] min. Nickel
Wiping Area: 30 μ″ [ 0.76 μm ] min. Gold
Solder Tails: 100 μ″ [ 2.54 μm ] Tin Alloy or whisker mitigating reflowed Tin (see ordering information)
Marking: Part Number and Date Code
Current Rating: 3.0 A
Insulation Resistance: 1 x 103 MΩ min. at 500 VDC
Withstanding Voltage: 900 VAC for 1 minute
Temperature Rating: -55°C to +105°C
Process Rating: 260°C (per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
TS-1139-03
Sheet 1 of 4
Date Modified: April 6, 2007
• High density up to 240 contacts for 3-row
• High density up to 320 contacts for 4-row
• Right angle mounting for vertical and horizontal
mating (extender boards)
• Mates with 3-row single-bay sockets
• Mates with 4-row single-bay sockets and 4-row
vertical sockets
• See Regulatory Information Appendix (RIA)
for chemical compliance information
UL File No.: E68080
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ HDC Plug
.100″ Right Angle, PCB, Solder Tail HDC Series
TS-1139-03
Sheet 2 of 4
3-Row Plug
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ HDC Plug
.100″ Right Angle, PCB, Solder Tail HDC Series
TS-1139-03
Sheet 3 of 4
Ordering Information
HDC - PXXX - X1S1 - XX
Pin Quanti ty:
See Table Number of Rows:
3 = Three Row
4 = Four Row
TG30 = 30μ" [.76μm] gold with tin-lead tails
(RIA E3 & C2 appl y)
MH = 30μ" [.76μm] gold with whisker mitigating reflowed tin tails
(RIA E1 & C1 appl y)
Product Table/Dimensions for 3-Row, Single Bay
Description Pin
Quantit
y
ABCD
HDC-P045-31S1-XXXX 45 2.250 1.950 1.400 1.550
[57.15] [49.53] [35.56] [39.37]
HDC-P075-31S1-XXXX 75 3.250 2.950 2.400 2.550
[82.55] [74.93] [60.96] [64.77]
HDC-P090-31S1-XXXX 90 3.750 3.450 2.900 3.050
[95.25] [87.63] [73.66] [77.47]
HDC-P096-31S1-XXXX 96 3.950 3.650 3.100 3.250
[100.33] [92.71] [78.74] [82.55]
HDC-P102-31S1-XXXX 102 4.150 3.850 3.300 3.450
[105.41] [97.79] [83.82] [87.63]
HDC-P120-31S1-XXXX 120 4.750 4.450 3.900 4.050
[120.65] [113.03] [99.06] [102.87]
HDC-P135-31S1-XXXX 135 5.250 4.950 4.400 4.550
[133.35] [125.73] [111.76] [115.57]
HDC-P150-31S1-XXXX 150 5.750 5.450 4.900 5.050
[146.05] [138.43] [124.46] [128.27]
HDC-P165-31S1-XXXX 165 6.250 5.950 5.400 5.550
[158.75] [151.13] [137.16] [140.97]
HDC-P180-31S1-XXXX 180 6.750 6.450 5.900 6.050
[171.45] [163.83] [149.86] [153.67]
HDC-P195-31S1-XXXX 195 7.250 6.950 6.400 6.550
[184.15] [176.53] [162.56] [166.37]
HDC-P210-31S1-XXXX 210 7.750 7.450 6.900 7.050
[196.85] [189.23] [175.26] [179.07]
HDC-P225-31S1-XXXX 225 8.250 7.950 7.400 7.550
[209.55] [201.93] [187.96] [191.77]
HDC-P228-31S1-XXXX 228 8.350 8.050 7.500 7.650
[212.09] [204.47] [190.50] [194.31]
HDC-P240-31S1-XXXX 240 8.750 8.450 7.900 8.050
[222.25] [214.63] [200.66] [204.47]
Product Table/Dimensions for 4-Row, Single Bay
Description Pin
Quantit
y
ABCD
HDC-P060-41S1-XXXX 60 2.250 1.950 1.400 1.550
[57.15] [49.53] [35.56] [39.37]
HDC-P076-41S1-XXXX 76 2.650 2.350 1.800 1.950
[67.31] [59.69] [45.72] [49.53]
HDC-P080-41S1-XXXX 80 2.750 2.450 1.900 2.050
[69.85] [62.23] [48.26] [52.07]
HDC-P100-41S1-XXXX 100 3.250 2.950 2.400 2.550
[82.55] [74.93] [60.96] [64.77]
HDC-P120-41S1-XXXX 120 3.750 3.450 2.900 3.050
[95.25] [87.63] [73.66] [77.47]
HDC-P128-41S1-XXXX 128 3.950 3.650 3.100 3.250
[100.33] [92.71] [78.74] [82.55]
HDC-P140-41S1-XXXX 140 4.250 3.950 3.400 3.550
[107.95] [100.33] [86.36] [90.17]
HDC-P160-41S1-XXXX 160 4.750 4.450 3.900 4.050
[120.65] [113.03] [99.06] [102.87]
HDC-P168-41S1-XXXX 168 4.950 4.650 4.100 4.250
[125.73] [118.11] [104.14] [107.95]
HDC-P180-41S1-XXXX 180 5.250 4.950 4.400 4.550
[133.35] [125.73] [111.76] [115.57]
HDC-P200-41S1-XXXX 200 5.750 5.450 4.900 5.050
[146.05] [138.43] [124.46] [128.27]
HDC-P216-41S1-XXXX 216 6.150 5.850 5.300 5.450
[156.21] [148.59] [134.62] [138.43]
HDC-P220-41S1-XXXX 220 6.250 5.950 5.400 5.550
[158.75] [151.13] [137.16] [140.97]
HDC-P240-41S1-XXXX 240 6.750 6.450 5.900 6.050
[171.45] [163.83] [149.86] [153.67]
HDC-P260-41S1-XXXX 260 7.250 6.950 6.400 6.550
[184.15] [176.53] [162.56] [166.37]
HDC-P280-41S1-XXXX 280 7.750 7.450 6.900 7.050
[196.85] [189.23] [175.26] [179.07]
HDC-P300-41S1-XXXX 300 8.250 7.950 7.400 7.550
[209.55] [201.93] [187.96] [191.77]
HDC-P320-41S1-XXXX 320 8.750 8.450 7.900 8.050
[222.25] [214.63] [200.66] [204.47]
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ HDC Plug
.100″ Right Angle, PCB, Solder Tail HDC Series
TS-1139-03
Sheet 4 of 4
4-Row Plug
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon
information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision
2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217-A
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does not contain any of the following substances in excess of the following maximum
concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise
stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by
third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
20
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does contain a substance, as detailed in the chart below, in excess of the following
maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless
otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform
with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in
accordance with the product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the
accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s
current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in
writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s
option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for
any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
Name and Content of Hazardous Substances or Elements
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/interconnects RIA-2217-A
© 3M 2007
