DISCRETE SEMICONDUCTORS DATA SHEET M3D744 PEMB11 PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k Preliminary specification 2001 Sep 13 Philips Semiconductors Preliminary specification PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k PEMB11 FEATURES QUICK REFERENCE DATA * 300 mW total power dissipation SYMBOL * Very small 1.6 mm x 1.2 mm ultra thin package VCEO collector-emitter voltage -50 V ICM peak collector current -100 mA TR1 PNP - - TR2 PNP - - R1 bias resistor 10 k R2 bias resistor 10 k * Excellent coplanarity due to straight leads * Replaces two SC-75/SC-89 packaged transistors on same PCB area * Reduces required PCB area * Reduced pick and place costs. PARAMETER MAX. UNIT PINNING APPLICATIONS * General purpose switching and amplification PIN * Inverter and interface circuits 1, 4 emitter TR1; TR2 * Circuit driver. 2, 5 base TR1; TR2 6, 3 collector TR1; TR2 DESCRIPTION DESCRIPTION PNP resistor-equipped transistors in a SOT666 plastic package. handbook, halfpage 6 6 4 5 5 R1 MARKING TYPE NUMBER PEMB11 4 R2 TR2 TR1 MARKING CODE R2 B1 1 2 3 1 Top view Fig.1 R1 2 Simplified outline (SOT666) and symbol. 2, 5 6, 3 1, 4 MBK120 Fig.2 Equivalent inverter symbol. 2001 Sep 13 2 3 MAM451 Philips Semiconductors Preliminary specification PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k PEMB11 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT Per transistor unless otherwise specified VCBO collector-base voltage open emitter - -50 V VCEO collector-emitter voltage open base - -50 V VEBO emitter-base voltage open collector - -10 V VI input voltage positive - +10 V negative - -40 V - -100 mA IO output current (DC) ICM peak collector current Ptot total power dissipation Tstg - -100 mA - 200 mW storage temperature -65 +150 C Tj junction temperature - 150 C Tamb operating ambient temperature -65 +150 C - 300 mW Tamb 25 C; note 1 Per device Ptot total power dissipation Tamb 25 C; note 1 Note 1. Transistor mounted on a FR4 printed-circuit board. THERMAL CHARACTERISTICS SYMBOL Rth j-a PARAMETER CONDITIONS thermal resistance from junction to ambient notes 1 and 2 Notes 1. Transistor mounted on an FR4 printed-circuit board. 2. The only recommended soldering method is reflow soldering. 2001 Sep 13 3 VALUE UNIT 416 K/W Philips Semiconductors Preliminary specification PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k PEMB11 CHARACTERISTICS Tamb = 25 C unless otherwise specified. SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT Per transistor unless otherwise specified ICBO collector-base cut-off current ICEO collector-emitter cut-off current VCB = -50 V; IC = 0 - - -100 nA VCE = -50 V; IB = 0 - - -1 A VCE = -30 V; IB = 0; Tj = 150 C - - -50 A A IEBO emitter-base cut-off current VEB = -5 V; IC = 0 - - -400 hFE DC current gain VCE = -5 V; IC = -5 mA 30 - - VCEsat collector-emitter saturation voltage IC = -10 mA; IB = -0.5 mA - - -150 mV Vi(off) input off voltage VCE = -5 V; IC = -100 A - -1.1 -0.8 V Vi(on) input on voltage VCE = -0.3 V; IC = -10 mA -2.5 -1.8 - V R1 input resistor 7 10 13 k R2 -------R1 resistor ratio 0.8 1.0 1.2 k Cc collector capacitance - - 3 pF 2001 Sep 13 IE = Ie = 0; VCB = -10 V; f = 1 MHz 4 Philips Semiconductors Preliminary specification PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k PEMB11 PACKAGE OUTLINE Plastic surface mounted package; 6 leads SOT666 D E A X Y S S HE 6 5 4 pin 1 index A 1 2 e1 c 3 bp w M A Lp e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A bp c D E e e1 HE Lp w y mm 0.6 0.5 0.27 0.17 0.18 0.08 1.7 1.5 1.3 1.1 1.0 0.5 1.7 1.5 0.3 0.1 0.1 0.1 OUTLINE VERSION REFERENCES IEC JEDEC EIAJ ISSUE DATE 01-01-04 01-08-27 SOT666 2001 Sep 13 EUROPEAN PROJECTION 5 Philips Semiconductors Preliminary specification PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k PEMB11 DATA SHEET STATUS DATA SHEET STATUS(1) PRODUCT STATUS(2) DEFINITIONS Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2001 Sep 13 6 Philips Semiconductors Preliminary specification PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k PEMB11 NOTES 2001 Sep 13 7 Philips Semiconductors - a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. (c) Koninklijke Philips Electronics N.V. 2001 SCA73 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613514/01/pp8 Date of release: 2001 Sep 13 Document order number: 9397 750 08597