MCH6102 / MCH6202 Ordering number : EN6480B MCH6102 / MCH6202 PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Applications * Relay drivers, lamp drivers, motor drivers, flash. Features * * * * * * Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm). High allowable power dissipation. Specifications ( ) : MCH6102 Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (--30)40 Collector-to-Emitter Voltage VCEO (--)30 V Emitter-to-Base Voltage VEBO (--)5 V (--)1.5 A Collector Current Base Current IC ICP IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Collector Current (Pulse) (--)3 (--)300 Mounted on a ceramic board (600mm20.8mm) V A mA 1.0 W 150 C --55 to +150 C Electrical Characteristics at Ta=25C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product hFE fT Output Capacitance Cob Conditions VCB=(--)30V, IE=0A VEB=(--)4V, IC=0A VCE=(--)2V, IC=(--)100mA VCE=(--)10V, IC=(--)300mA VCB=(--)10V, f=1MHz Ratings min typ max 200 Unit (--)0.1 A (--)0.1 A 560 (450)500 Marking: MCH6102: AB, MCH6202: CB (9)8 MHz pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D2005EA MS IM TB-00001962 / D1004 TS IM TB-00000347 / 83100TS (KOTO) TA-2843 No.6480-1/5 MCH6102 / MCH6202 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage VCE(sat) Base-to-Emitter Saturation Voltage VBE(sat) Collector-to-Base Breakdown Voltage V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage V(BR)EBO Turn-ON Time Fall Time min IC=(--)750mA, IB=(--)15mA IC=(--)750mA, IB=(--)15mA IC=(--)10A, IE=0A IC=(--)1mA, RBE= tf Unit typ max (--250)150 (--375)225 (--)0.85 (--)1.2 mV V (--30)40 V (--)30 V IE=(--)10A, IC=0A See specified Test Circuit. ton tstg Storage Time Ratings Conditions (--)5 V (37)35 ns See specified Test Circuit. (115)205 ns See specified Test Circuit. (26)32 ns Package Dimensions Switching Time Test Circuit unit : mm 7022-007 IB1 IB2 6 4 0.85 5 1 : Collector 2 : Collector 3 : Base 4 : Emitter 5 : Collector 6 : Collector 1 2 3 Top View --0.8 --4mA --2mA --0.4 --600 --800 Collector-to-Emitter Voltage, VCE -- mV 25C --25C --0.6 C 50 6mA 4mA 0.8 2mA 1.4 --0.4 10mA 1.2 1.6 --0.8 --0.2 15mA IB=0mA 200 400 600 800 1000 Collector-to-Emitter Voltage, VCE -- mV IC -- VBE --1.0 20mA 8mA 40mA IT01872 MCH6102 VCE= --2V Ta=7 5 Collector Current, IC -- A 1.6 0 0 --1000 --1.2 30mA 0.4 IB=0mA 0 --1.4 Collector Current, IC -- A --50mA --40mA --30mA --20mA --15mA --10mA --1.6 IC -- VCE MCH6202 Collector Current, IC -- A Collector Current, IC -- A --6mA --1.2 --400 VCC=12V 20IB1= --20IB2= IC=750mA For PNP, the polarity is reversed. 2.0 --1.6 --200 470F VBE= --5V IC -- VCE 0 100F SANYO : MCPH6 MCH6102 --8mA RL=16 + IT01873 IC -- VBE MCH6202 VCE=2V 1.2 1.0 0.8 0.6 Ta=75 C 0.65 1 mA 0.25 2 0.07 50 2.0 --2.0 RB VR + PW=20s D.C.1% 3 OUTPUT INPUT 0.15 6 1.6 2.1 5 0.4 --25C 0.3 4 25C 0.25 Bottom View 0.2 0 0 0 --0.2 --0.4 --0.6 --0.8 Base-to-Emitter Voltage, VBE -- V --1.0 IT01874 0 0.2 0.4 0.6 0.8 Base-to-Emitter Voltage, VBE -- V 1.0 IT01875 No.6480-2/5 MCH6102 / MCH6202 hFE -- IC 1000 7 100 7 5 5 2 5 7 --0.1 2 3 5 7 --1.0 2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 2 --100 C 75 Ta= 5C --2 3 25C 2 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 5 2 C 75 7 Ta= 5 3 25C C --25 2 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 5 3 2 Ta= --25C 75C 25C 2 2 3 = Ta 3 25C C 5 --2 2 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC -- A 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 IT01882 2 3 IT01879 VCE(sat) -- IC MCH6202 IC / IB=50 5 3 2 100 5C 7 7 Ta= 5 25C C --25 3 2 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC -- A 2 3 IT01881 VBE(sat) -- IC MCH6202 IC / IB=50 7 5 3 2 Ta= --25C 1000 3 --100 --0.01 C 75 5 10000 7 5 7 IT01880 MCH6102 IC / IB=50 3 100 3 VBE(sat) -- IC --10000 2 IT01877 7 --100 7 7 1.0 MCH6202 IC / IB=20 1000 2 --1000 5 VCE(sat) -- IC IT01878 3 3 3 2 10 0.01 VCE(sat) -- IC 2 2 3 3 MCH6102 IC / IB=50 --10 --0.01 7 0.1 5 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 5 Collector Current, IC -- A 7 5 5 3 1000 MCH6102 IC / IB=20 7 2 IT01876 7 --1000 10 0.01 3 VCE(sat) -- IC --1000 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 2 Collector Current, IC -- A Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV --25C 100 3 3 25C 2 3 2 Ta=75C 3 DC Current Gain, hFE 25C --25C 2 10 --0.01 Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 5 Ta=75C 3 MCH6202 VCE=2V 7 Base-to-Emitter Saturation Voltage, VBE(sat) -- mV DC Current Gain, hFE 5 hFE -- IC 1000 MCH6102 VCE= --2V 7 75C 5 25C 3 2 100 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC -- A 2 3 IT01883 No.6480-3/5 MCH6102 / MCH6202 Cob -- VCB 5 2 100 7 5 3 2 10 7 5 3 2 3 5 7 --1.0 2 3 5 7 --10 2 Collector-to-Base Voltage, VCB -- V 5 3 2 100 7 5 3 2 --0.01 2 3 5 7 2 --0.1 3 5 Collector Current, IC -- A 10 7 5 2 3 5 7 1.0 2 3 5 --1.0 IT01886 1ms er ati on 3 2 0.1 MCH6102 / MCH6202 Ta=25C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm20.8mm) 0.01 0.1 2 3 5 7 1.0 2 3 5 7 10 2 5 MCH6202 VCE=10V 5 3 2 100 7 5 3 2 3 5 7 2 0.1 3 5 7 1.0 IT01887 PC -- Ta MCH6102 / MCH6202 1.2 s op 3 IT01885 Collector Current, IC -- A Collector Dissipation, PC -- W 0m s 2 7 2 0.01 7 s 0 m 7 10 f T -- IC 1000 10 DC 10 10 s 0 Collector Current, IC -- A 2 1.4 50 IC=1.5A 7 5 2 3 ICP=3A 1.0 3 5 Collector-to-Base Voltage, VCB -- V ASO 7 5 7 IT01884 MCH6102 VCE= --10V 7 2 100 2 0.1 5 Gain-Bandwidth Product, f T -- MHz Gain-Bandwidth Product, f T -- MHz 3 f T -- IC 1000 3 2 3 2 --0.1 5 MCH6202 f=1MHz 3 Output Capacitance, Cob -- pF Output Capacitance, Cob -- pF 3 Cob -- VCB 5 MCH6102 f=1MHz M 1.0 ou nte do na 0.8 ce ram ic 0.6 bo ard (6 00 mm 0.4 2 0 .8m 0.2 m) 0 3 Collector-to-Emitter Voltage, VCE -- V 5 7 100 IT01888 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT01889 No.6480-4/5 MCH6102 / MCH6202 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2005. Specifications and information herein are subject to change without notice. PS No.6480-5/5