NTD4815N, NVD4815N Power MOSFET 30 V, 35 A, Single N-Channel, DPAK/IPAK Features Low RDS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses AEC-Q101 Qualified and PPAP Capable - NVD4815N These Devices are Pb-Free and are RoHS Compliant http://onsemi.com V(BR)DSS RDS(ON) MAX 15 mW @ 10 V 30 V Applications D MAXIMUM RATINGS (TJ = 25C unless otherwise stated) G Symbol Value Unit Drain-to-Source Voltage VDSS 30 V Gate-to-Source Voltage VGS 20 V ID 8.5 A TA = 25C Power Dissipation RqJA (Note 1) TA = 25C PD 1.92 Continuous Drain Current RqJA (Note 2) TA = 25C ID 6.9 TA = 85C 4 W 1 2 A 5.3 TA = 25C PD 1.26 W Continuous Drain Current RqJC (Note 1) TC = 25C ID 35 A Power Dissipation RqJC (Note 1) TC = 25C PD 32.6 W TA = 25C IDM 87 A TA = 25C IDmaxPkg 35 A TJ, TSTG -55 to +175 C IS 27 A Drain to Source dV/dt dV/dt 6 V/ns Single Pulse Drain-to-Source Avalanche Energy (VDD = 24 V, VGS = 10 V, IL = 11 Apk, L = 1.0 mH, RG = 25 W) EAS 60.5 mJ Lead Temperature for Soldering Purposes (1/8" from case for 10 s) TL 260 C Pulsed Drain Current TC = 85C tp=10ms Current Limited by Package Operating Junction and Storage Temperature Source Current (Body Diode) October, 2011 - Rev. 7 1 3 CASE 369AA DPAK (Bent Lead) STYLE 2 2 3 CASE 369AC 3 IPAK (Straight Lead) MARKING DIAGRAMS & PIN ASSIGNMENTS 27 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. (c) Semiconductor Components Industries, LLC, 2011 4 6.5 1 4 Drain 4815NG TA = 85C 2 1 Drain 3 Gate Source Y WW 4815N G 4 Drain 4815NG Continuous Drain Current RqJA (Note 1) S N-CHANNEL MOSFET YWW Parameter Power Dissipation RqJA (Note 2) 35 A 25 mW @ 4.5 V * CPU Power Delivery * DC-DC Converters * High Side Switching Steady State ID MAX YWW * * * * * 1 2 3 Gate Drain Source = Year = Work Week = Device Code = Pb-Free Package ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. Publication Order Number: NTD4815N/D NTD4815N, NVD4815N THERMAL RESISTANCE MAXIMUM RATINGS Symbol Value Unit Junction-to-Case (Drain) Parameter RqJC 4.6 C/W Junction-to-TAB (Drain) RqJC-TAB 3.5 Junction-to-Ambient - Steady State (Note 1) RqJA 78 Junction-to-Ambient - Steady State (Note 2) RqJA 119 1. Surface-mounted on FR4 board using 1 sq-in pad, 1 oz Cu. 2. Surface-mounted on FR4 board using the minimum recommended pad size. ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified) Symbol Test Condition Min Drain-to-Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 30 Drain-to-Source Breakdown Voltage Temperature Coefficient V(BR)DSS/ TJ Parameter Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current Gate-to-Source Leakage Current IDSS V 25 VGS = 0 V, VDS = 24 V mV/C TJ = 25 C 1 TJ = 125C 10 IGSS VDS = 0 V, VGS = 20 V VGS(TH) VGS = VDS, ID = 250 mA mA 100 nA 2.5 V ON CHARACTERISTICS (Note 3) Gate Threshold Voltage Negative Threshold Temperature Coefficient VGS(TH)/TJ Drain-to-Source On Resistance RDS(on) Forward Transconductance 1.5 5.6 VGS = 10 V to 11.5 V ID = 30 A 12 ID = 15 A 11.5 VGS = 4.5 V ID = 30 A 21 ID = 15 A 18.3 gFS VDS = 15 V, ID = 10 A mV/C 15 25 6.0 mW S CHARGES AND CAPACITANCES Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance CRSS 108 Total Gate Charge QG(TOT) 6.0 Threshold Gate Charge QG(TH) Gate-to-Source Charge QGS Gate-to-Drain Charge QGD Total Gate Charge QG(TOT) 770 VGS = 0 V, f = 1.0 MHz, VDS = 12 V VGS = 4.5 V, VDS = 15 V; ID = 30 A 181 0.9 2.5 pF 6.6 nC 3.1 VGS = 11.5 V, VDS = 15 V; ID = 30 A 14.1 nC SWITCHING CHARACTERISTICS (Note 4) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time td(ON) tr td(OFF) 10.5 VGS = 4.5 V, VDS = 15 V, ID = 15 A, RG = 3.0 W tf 21.4 11.4 3.5 3. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 4. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 ns NTD4815N, NVD4815N ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified) Parameter Symbol Test Condition Min Typ Max Unit SWITCHING CHARACTERISTICS (Note 4) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time td(ON) tr td(OFF) 6.3 VGS = 11.5 V, VDS = 15 V, ID = 15 A, RG = 3.0 W tf 17.6 ns 18.4 2.3 DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time VSD TJ = 25C 1.0 TJ = 125C 0.92 tRR Charge Time ta Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = 30 A 1.2 V 15.3 VGS = 0 V, dIS/dt = 100 A/ms, IS = 30 A 8.7 ns 6.6 QRR 5.5 nC Source Inductance LS 2.49 nH Drain Inductance, DPAK LD 0.0164 Drain Inductance, IPAK LD Gate Inductance LG 3.46 Gate Resistance RG 2.6 PACKAGE PARASITIC VALUES TA = 25C 3. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 4. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 3 1.88 W NTD4815N, NVD4815N TYPICAL PERFORMANCE CURVES 80 5.5 V to 10 V 5V 50 TJ = 25C ID, DRAIN CURRENT (AMPS) ID, DRAIN CURRENT (AMPS) 60 4.5 V 40 4V 30 3.8 V 3.6 V 20 3.4 V 3.2 V 10 3V 0 1 4 3 2 5 40 30 TJ = 125C 20 TJ = 25C 10 TJ = -55C 0 2 1 3 4 5 6 7 8 9 Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 0.020 0.015 0.010 0.005 3 4 5 6 7 8 9 10 12 11 RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) ID = 30 A TJ = 25C 2 50 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) 0.025 0 60 0 0.030 10 0.030 TJ = 25C 0.025 0.020 VGS = 4.5 V 0.015 0.010 VGS = 11.5 V 0.005 0 10 5 15 20 25 30 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) ID, DRAIN CURRENT (AMPS) Figure 3. On-Resistance vs. Gate-to-Source Voltage Figure 4. On-Resistance vs. Drain Current and Gate Voltage 100,000 2.0 ID = 30 A VGS = 10 V VGS = 0 V TJ = 175C 10,000 IDSS, LEAKAGE (nA) RDS(on), DRAIN-TO-SOURCE RESISTANCE (NORMALIZED) RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) 0 VDS 10 V 70 1.5 1.0 0.5 -50 -25 1000 TJ = 125C 100 10 0 25 50 75 100 125 150 175 4 8 12 16 20 24 28 TJ, JUNCTION TEMPERATURE (C) VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current vs. Drain Voltage http://onsemi.com 4 32 NTD4815N, NVD4815N C, CAPACITANCE (pF) TJ = 25C Ciss Coss 15 25 20 30 GATE-TO-SOURCE OR DRAIN-TO-SOURCE VOLTAGE (VOLTS) 10 td(on) tf 1 10 RG, GATE RESISTANCE (OHMS) Q1 4 6 4 1 0 ID = 30 A TJ = 25C 0 1 0.1 I D, DRAIN CURRENT (AMPS) 0 VGS = 0 V 25 TJ = 25C 20 15 10 5 0 0.4 1 ms 10 ms dc 1 10 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) 100 EAS, SINGLE PULSE DRAIN-TO-SOURCE AVALANCHE ENERGY (mJ) 0.1 RDS(on) LIMIT THERMAL LIMIT PACKAGE LIMIT 7 6 0.5 0.6 0.7 0.8 0.9 1.0 1.1 Figure 10. Diode Forward Voltage vs. Current 100 ms 1 2 3 4 5 QG, TOTAL GATE CHARGE (nC) 2 VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS) 10 ms VGS = 20 V SINGLE PULSE TC = 25C 10 2 100 1000 10 12 VGS 8 Figure 9. Resistive Switching Time Variation vs. Gate Resistance 100 Q2 3 IS, SOURCE CURRENT (AMPS) t, TIME (ns) tr td(off) 1 QT 30 VDD = 15 V ID = 30 A VGS = 11.5 V 100 14 VDS 5 Figure 8. Gate-To-Source and Drain-To-Source Voltage vs. Total Charge Figure 7. Capacitance Variation 1000 16 6 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) 1500 VDS = 0 V VGS = 0 V 1400 1300 1200 1100 Ciss 1000 900 800 700 600 500 Crss 400 300 200 100 Crss 0 5 5 10 0 10 VGS VDS VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) TYPICAL PERFORMANCE CURVES 70 60 ID = 11 A 50 40 30 20 10 0 25 Figure 11. Maximum Rated Forward Biased Safe Operating Area 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) Figure 12. Maximum Avalanche Energy vs. Starting Junction Temperature http://onsemi.com 5 175 NTD4815N, NVD4815N TYPICAL PERFORMANCE CURVES I D, DRAIN CURRENT (AMPS) 100 10 25C 100C 125C 1 0.1 10 100 PULSE WIDTH (ms) 1 1000 r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) Figure 13. Avalanche Characteristics 1.0 D = 0.5 0.2 0.1 0.1 0.05 P(pk) 0.02 0.01 SINGLE PULSE 0.01 1.0E-05 1.0E-04 t1 t2 DUTY CYCLE, D = t1/t2 1.0E-03 1.0E-02 t, TIME (ms) RqJC(t) = r(t) RqJC D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) RqJC(t) 1.0E-01 1.0E+00 1.0E+01 Figure 14. Thermal Response ORDERING INFORMATION Package Shipping NTD4815NT4G DPAK (Pb-Free) 2500 / Tape & Reel NTD4815N-35G IPAK Trimmed Lead (3.5 " 0.15 mm) (Pb-Free) 75 Units / Rail NVD4815NT4G DPAK (Pb-Free) 2500 / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 6 NTD4815N, NVD4815N PACKAGE DIMENSIONS DPAK (SINGLE GUAGE) CASE 369AA-01 ISSUE B A E b3 c2 B Z D 1 L4 A 4 L3 b2 e 2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. C H DETAIL A 3 DIM A A1 b b2 b3 c c2 D E e H L L1 L2 L3 L4 Z c b 0.005 (0.13) M H C L2 GAUGE PLANE C L SEATING PLANE A1 L1 DETAIL A ROTATED 905 CW STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN SOLDERING FOOTPRINT* 6.20 0.244 2.58 0.102 5.80 0.228 3.00 0.118 1.60 0.063 INCHES MIN MAX 0.086 0.094 0.000 0.005 0.025 0.035 0.030 0.045 0.180 0.215 0.018 0.024 0.018 0.024 0.235 0.245 0.250 0.265 0.090 BSC 0.370 0.410 0.055 0.070 0.108 REF 0.020 BSC 0.035 0.050 --- 0.040 0.155 --- 6.17 0.243 SCALE 3:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 7 MILLIMETERS MIN MAX 2.18 2.38 0.00 0.13 0.63 0.89 0.76 1.14 4.57 5.46 0.46 0.61 0.46 0.61 5.97 6.22 6.35 6.73 2.29 BSC 9.40 10.41 1.40 1.78 2.74 REF 0.51 BSC 0.89 1.27 --- 1.01 3.93 --- NTD4815N, NVD4815N PACKAGE DIMENSIONS 3 IPAK, STRAIGHT LEAD CASE 369AC-01 ISSUE O B V C E R DIM A B C D E F G H J K R V W A SEATING PLANE K W F J G D NOTES: 1.. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2.. CONTROLLING DIMENSION: INCH. 3. SEATING PLANE IS ON TOP OF DAMBAR POSITION. 4. DIMENSION A DOES NOT INCLUDE DAMBAR POSITION OR MOLD GATE. H 3 PL 0.13 (0.005) W INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.043 0.090 BSC 0.034 0.040 0.018 0.023 0.134 0.142 0.180 0.215 0.035 0.050 0.000 0.010 MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.09 2.29 BSC 0.87 1.01 0.46 0.58 3.40 3.60 4.57 5.46 0.89 1.27 0.000 0.25 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 8 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTD4815N/D