INSULATED TO3P
MECHANICAL DATA
TYPICAL APPLICATIONS
FEATURES
Maximun Ratings and Electrical Characteristics at 25°C
Used on inductive loads, thanks to their high commutation
performances.
G
lass/passivated die junctions
High surge current capability
Solder dip 260ºC, 10s
Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
Meets MSL level 3, per J-STD-020, LF maximum
peak of 260º C
Low forward voltage drop
INSULATED HIGH COMMUTATION TRIAC
FT40...P
Off-State Voltage
600 V ÷ 800 V
On-State Current
40 Amp
Gate Trigger Current
£ 50 mA (16)
£ 35 mA (14)
RMS On-state Current (full sine wave)
IT(RMS)
PARAMETER CONDITIONS Value UnitSYMBOL
ITSM
I2t
IGM
PG(AV)
Tj
Tstg
All Conduction Angle, Tc = 80 °C
1000
dI/dt
ITSM
Tsld
260
Peak Gate Current
Non-repetitive On-State Current
Fusing Current
Average Gate Power Dissipation
Critical rate of rise of on-state current
Operating Temperature
Storage Temperature
Non-repetitive On-State Current
Soldering Temperature 10s max °C
Full Cycle, 60 Hz (t = 16.7 ms)
Full Cycle, 50 Hz (t = 20 ms)
tp = 10 ms, Half Cycle
20 µs max. Tj = 125 °C
Tj = 125 °C
I
G
= 2x I
GT
, tr £100ns
f = 120 Hz, Tj = 125 °C
8
40
420
400
1
50
(-40 +125)
(-40 +150)
A
A
A
W
A
2
s
A
A/µs
°C
°C
High current Triac
Low thermal resistance
High commutation
Repetitive Peak Off State Voltage
PARAMETER VOLTAGE Unit
SYMBOL
VDRM/VRRM
V
M
600
N
800
Provides voltage insulated tab (rated at 2500V RMS)
13
2
Viso
2.500 Vac
www.fagorelectronica.com
Document Name: ft40phc Version: Feb-12
Page Number: 1/6
Case: INSULATED TO3P. Epoxy meets UL 94V-0
flammability rating.
Polarity: As marked on the body.
Terminals:
Matte tin plated leads, solderable per
MIL-STD-750 Method 2026, J-STD-002 and JESD22-B102.
Consumer grade, meets JESD 201 class 1A whisker test.
MT2 (2)
MT1 (1)
G (3)
R.M.S. isolation voltage 50/60 Hz
sinusoidal waveform
FT40...P
INSULATED HIGH COMMUTATION TRIAC
Electrical Characteristics at Tamb = 25 °C
FAGOR
TRIAC
CURRENT
CASE
VOLTAGE
SENSITIVITY
F T 40 14 M P 00
FORMING
TU
PACKAGING
Part Number Information
(1) Minimum I
GT
is guaranted at 5% of I
GT
max.
(2) For either polarity of electrode MT2 voltage with reference to electrode MT1.
PARAMETER
CONDITIONS
SENSITIVITY
Unit
SYMBOL
VD = 12 VDC, RL = 33W,
Quadrant
mA
MAX
I
GT
(1)
Q1÷Q3Gate Trigger Current
VD = 12 VDC, RL = 33W,
Q1÷Q3
V
GT
Gate Trigger Voltage
V
GD
Gate Non Trigger Voltage
Off-State Leakage Current
IDRM/IRRM
IH (2)
V
D
= V
DRM
,
Tj = 125 °C
T
j
= 25 °CV
R
= V
RRM
,
I
T
=500 mA,Gate open,
V
D
= V
DRM
, R
L
= 3.3 KW,
rd (2)
Dynamic resistance
Latching Current
IG = 1.2 IGT, Tj = 25 °C
dV/dt (2)
Critical Rate of Voltage Rise
Rth(j-c)
Thermal Resistance
Vt (o) (2)
Threshold Voltage
T
j
= 125 °C
V
D
= 0.67 x V
DRM
, Gate open
for AC 360° conduction angle
Junction-Case
Holding Current
T
j
= 125 °C
T
j
= 125 °C
VTM (2)
On-state Voltage
I
T
= 60 Amp, tp = 380 µs,
T
j
= 25 °C
IL
°C/W
MAX
MAX
MAX
MAX
MAX
µA
mA
mW
V
V
Q2
MIN
160
V/µs
Q1,Q3
Q1÷Q3
80
mA
MAX
MAX
MAX
MIN
MAX
70
mA
mA
V
V
Tj = 125 °C
T
j
= 25 °C
T
j
= 25 °C
14
35
16
50
1.3
0.2
50
60
400
160
500
0.85
1.55
10
5
0.9
T
j
= 25 °C
20
(dV/dt)c
(2)
MIN
Tj = 125 °C
Critical Rate of Commu-
tating off-state voltage
(dI/dt)c
= 20 A/ms
V/ms
10
°C/W
Rth(j-a)
Thermal Resistance
Junction-Ambient
50
www.fagorelectronica.com
Document Name: ft40phc Version: Feb-12
Page Number: 2/5
FT40...P
INSULATED HIGH COMMUTATION TRIAC
Ordering information
TU
TUBE
450 4.50
FT4014MP 00TUC
Package Outline Dimensions
:
(mm)
INSULATED TO3P
Mounting Torque 0.8 N.m
ABCDEFGHJKLMN
MAX
TYP
MIN
4.6 1.55 15.6 0.7 2.9 16.5 21.1 15.5 5.65 3.65 4.17 1.40
4.60
4.4 1.45
14.35
0.5 2.7 15.8 20.4 15.1 5.4 3.4 4.08 1.20
DIMENSIONS (mm)
www.fagorelectronica.com
Document Name: ft40phc Version: Feb-12
Page Number: 3/5
PREFERRED P/N PACKAGE CODE DELIVERY MODE BASE QUANTITY UNIT WEIGHT (g)
J
C
A
B
H
N
K
F
G
E
J
D
L
M
Marking code
Format type
MC
Year code
WWY
Week code
XXXP
Test sort name
FT40...P
Ratings and Characteristics (Ta 25 ºC unless otherwise noted)
INSULATED HIGH COMMUTATION TRIAC
IT(RMS)(A)
Fig. 2: RMS on-state current versus case
temperature (full cycle).
Fig. 3: On-state characteristics (maximum
values)
400
ITM (A)
0.5 1.0 1.5 2.0 2.5 3.0
VTM (V)
3.5 4.0 4.5
tp(ms)
Fig. 1: Maximum power dissipation versus
RMS on-state current (full cycle).
P (W)
IT(RMS)(A)
0
10
20
30
40
50
0
020 3010 0 10025 12550 75
0.01 0.10 1.00 10.00
100
10
20
30
40
10
1
3000
40
1000
5
15
25
35
45
Tj = 25 °C
Tj max
15 25535
Tc(°C)
100
5.0
Repetitive
Tc = 70 °C
Number of cycles
Fig. 4: Surge peak on-state current
versus number of cycles
I TSM(A)
Non repetitive
Tj initial = 25 °C
t=20ms
One cycle
110 100 1000
0
50
200
300
150
100
250
350
400
450
Fig. 5: Non repetitive surge peak on-state
current for a sinusoidal pulse with width:
tp < 10 ms, and corresponding value of I2t.
ITSM(A). I2t (A2s)
20 40 60 80
100 120 140
0
0.5
2.0
1.0
1.5
2.5
IGT,IH,IL[Tj]/IGT,IH,IL.[Tj=25ºC]
Tj(ºC)
-40 -20 0
Fig. 7: Relative variation of gate trigger
current, holding current and latching versus
junction temperature (typical values)
www.fagorelectronica.com
Document Name: ft40phc Version: Feb-12
Page Number: 4/5
Tj initial = 25 °C
I2t
ITSM
IGT
I
H
&I
L
a =180°
FT40...P
INSULATED HIGH COMMUTATION TRIAC
Disclaimer
All product, product specifications and data are subject to change without notice to improve reliability,
function or design or otherwise.
Fagor Electrónica, S.Coop., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, "Fagor"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained
in any datasheet or in any other disclosure relating to any product.
Fagor makes no warranty, representation or guarantee regarding the suitability of the products for any particular
purpose or the continuing production of any product. To the maximum extent permitted by applicable law,
Fagor disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all
liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Fagor's knowledge
of typical requirements that are often placed on Fagor products in generic applications. Such statements are not
binding statements about the suitability of products for a particular application. It is the customer's responsibility
to validate that a particular product with the properties described in the product specification is suitable for use in a
particular application. Parameters provided in datasheets and/or specifications may vary in different applications
and performance may vary over time. All operating parameters, including typical parameters, must be validated
for each customer application by the customer's technical experts. Product specifications do not expand or
otherwise modify Fagor's terms and conditions of purchase, including but nos limited to the warranty expressed
therein.
Except as expressly indicated in writing. Fagor products are not designed for use in medical, life-saving, or
life-sustaining applications or for any other application in which the failure of the Fagor product could result in
personal injury or death. Customers using or selling Fagor products not expressly indicated for use in such
applications do so at their own risk and agree to fully indemnify and hold Fagor and its distributors harmless from
and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use
or sale, including attomeys fees, even if such claim alleges that Fagor or its distributor was negligent regarding
the design or manufacture of the part. Please contact authorized Fagor personnel to obtain written terms and
conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Fagor, Product names and markings noted herein may be trademarks of their
respective owners.
www.fagorelectronica.com
Document Name: ft40phc Version: Feb-12
Page Number: 5/5
