PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 1/18
Harvatek Surface Mount LEDs Approval Sheet
F1041SP Series
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 2/18
DISCLAIMER ................................................................................................................................. 3
LIFE SUPPORT POLICY .................................................................................................................. 3
PRODUCT SPECIFICATION ......................................................................................................... 4
ATTENTION: ELECTROSTATIC DISCHARGE (ESD) PROTECTION ...................................................... 4
LABEL SPECIFICATIONS: ........................................................................................................... 5
SPECIFICATIONS RANGE. .......................................................................................................... 6
CHROMATICITY COORDINATE: .................................................................................................. 8
PRODUCT FEATURES ............................................................................................................... 10
ELECTRO-OPTICAL CHARACTERISTICS ................................................................................ 10
PACKAGE OUTLINE DIMENSION AND RECOMMENDED SOLDERING PATTERN FOR
REFLOW SOLDERING ............................................................................................................... 10
ABSOLUTE MAXIMUM RATINGS ..................................................................................................... 10
CHARACTERISTICS OF F1041SP .................................................................................................. 11
PRECAUTION FOR USE ............................................................................................................ 12
PACKAGING ............................................................................................................................... 13
TAPE DIMENSION ........................................................................................................................ 13
REEL DIMENSION ........................................................................................................................ 14
PACKING .................................................................................................................................... 14
DRY PACK .................................................................................................................................. 15
BAKING ...................................................................................................................................... 15
PRECAUTIONS ............................................................................................................................ 15
HANDLING OF SILICONE RESIN LEDS .................................................................................... 16
REFLOW SOLDERING ............................................................................................................... 17
REWORKING ............................................................................................................................... 17
CLEANING .................................................................................................................................. 17
REVISION HISTORY ................................................................................................................... 18
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 3/18
DISCLAIMER
HARVATEK reserves the right to make changes without further notice to any products herein to
improve reliability, function or design. HARVATEK does not assume any liability arising out of the
application or use of any product or circuit described herein; neither does it convey any license
under its patent rights, nor the rights of others.
Life Support Policy
HARVATEK’s products are not authorized for use as critical components in life support devices or
systems without the express written approval of the President of HARVATEK or HARVATEK
INTERNATIONAL. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical
implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly
used in accordance with instructions for use provided in the labeling, can be reasonably expected
to result in a significant injury of the user.
2. A critical component in any component of a life support device or system whose failure to
perform can be reasonably expected to cause the failure of the life support device or system, or to
affect its safety or effectiveness.
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 4/18
Product Specification
Item
Specification
Material
Quantity
Luminous
Intensity(Iv)
Cool White: 1700~2385 mcd
@20mA/ TS= 25℃ ;Tolerance: + 10%
Chromaticity
Coordinate
As page 7 & 8
@20mA/ TS= 25℃;Tolerance: + 0.005
Vf
Cool White:2.8~3.5 V (0.1V/Bin)
@20mA/ TS= 25℃ ;Tolerance: + 0.05V
Ir
< 100 µA @ VR = 5 V
Resin
Yellow
Silicon Resin
Carrier tape
According to EIA 481-1A specs
Conductive black tape
1000pcs per reel
Reel
According to EIA 481-1A specs
Conductive black
Label
HT standard
Packing bag
220x240mm
Aluminum laminated bag/
no-zipper
One reel one bag
Carton
HT standard
Paper
Non-specified
Others:
Each immediate box consists of 5 reels. The 5 reels may not necessarily have the same lot number or the same bin
combinations of Iv, CIE and Vf. Each reel has a label identifying its specification; the immediate box consists of a product
label as well.
Note :This is shipped test conditions
※Remarks: This product should be operated in forward bias. If a reverse voltage is continuously applied to the product, such
operation can cause migration resulting in LED damage.
ATTENTION: Electrostatic Discharge (ESD) protection
The symbol to the left denotes that ESD precaution is needed. ESD protection for GaP and AlGaAs based
chips is necessary even though they are relatively safe in the presence of low static-electric discharge. Parts
built with AlInGaP, GaN, or/and InGaN based chips are STATIC SENSITIVE devices. ESD precaution must
be taken during design and assembly.
If manual work or processing is needed, please ensure the device is adequately protected from ESD during the process.
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 5/18
Label Specifications:
■ Harvatek P/N
F
104
1
SP--
20P-
Series
41
■Lot No.:
Product
Dice
Current
Taping
LF
1:Single
20mA
1. Taping style
2. Q’ty
Package
Color
Series Number
3.8(L)x1.0(W)x0.44(H) mm
SP:White
0001~ZZZZ
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 6/18
Specifications Range.
■ Luminous Intensity (Iv) Bin:
Color
Bin Code
Spec. Range
SP
Z42
1700~1800 mcd
Z51
1800~1900 mcd
Z52
1900~2010 mcd
Z61
2010~2125 mcd
Z62
2125~2250 mcd
Z71
2250~2385 mcd
Note: It maintains a tolerance of ±10% on luminous intensity
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 7/18
■ Color Bin:
X
Y
X
Y
GCA
0.26
0.25
FCA
0.266
0.242
0.252
0.236
0.258
0.228
0.258
0.228
0.264
0.22
0.266
0.242
0.272
0.234
0.26
0.25
0.266
0.242
GDA
0.268
0.264
FDA
0.274
0.256
0.26
0.25
0.266
0.242
0.266
0.242
0.272
0.234
0.274
0.256
0.28
0.248
0.268
0.264
0.274
0.256
GEA
0.276
0.278
FEA
0.282
0.27
0.268
0.264
0.274
0.256
0.274
0.256
0.28
0.248
0.282
0.27
0.288
0.262
0.276
0.278
0.282
0.27
GHA
0.284
0.292
FHA
0.29
0.284
0.276
0.278
0.282
0.27
0.282
0.27
0.288
0.262
0.29
0.284
0.296
0.276
0.284
0.292
0.29
0.284
GIA
0.292
0.306
FIA
0.298
0.298
0.284
0.292
0.29
0.284
0.29
0.284
0.296
0.276
0.298
0.298
0.304
0.29
0.292
0.306
0.298
0.298
GJA
0.3
0.32
FJA
0.306
0.312
0.292
0.306
0.298
0.298
0.298
0.298
0.304
0.29
0.306
0.312
0.312
0.304
0.3
0.32
0.306
0.312
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 8/18
X
Y
X
Y
GKA
0.308
0.334
FKA
0.314
0.326
0.3
0.32
0.306
0.312
0.306
0.312
0.312
0.304
0.314
0.326
0.32
0.318
0.308
0.334
0.314
0.326
Note: It maintains a tolerance of x, y ±0.01
Chromaticity Coordinate:
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 9/18
■ Forward Voltage (Vf) Bin:
Color
Bin Code
Spec. Range
SP
H1
2.8-2.9
H2
2.9-3.0
H3
3.0-3.1
H4
3.1-3.2
J1
3.2-3.3
J2
3.3-3.4
J3
3.4~3.5
Note: It maintains a tolerance of ±0.05V on forward voltage measurements
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 10/18
Product Features
(TSoldering ,25 oC)
Series
Emitting Color
Material
VF(V)
Chromaticity Coordinate
IV(mcd)
Viewing
Angle
2
1
2
typ
max
x,y
Typical
F1041SP
Cool White
InGaN
3.1
3.5
x=0.2800 ,y=0.2600
1850
120
Package Outline Dimension and Recommended Soldering Pattern for Reflow Soldering
(Unit:mm Tolerance: +/-0.1)
Outline Dim.
Soldering Pattern
Soldering terminals may shift in the x, y direction.
Absolute Maximum Ratings
(TSoldering ,25 oC)
Series
PD (mW)
IF (mA)
IFP (mA)*
TOP (oC)
TST (oC)
Color
Power Dissipation
Forward
Current
Pulse Forward
Current
Operating
Temperature
Storage Temperature
SP
70
20
30
-40~+85
-40~+100
* Condition for IFP is pulse of 1/10 duty and 0.1msec width
Electro-Optical Characteristics
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 11/18
Characteristics of F1041SP
Directive Characteristics
Directive Characteristics
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 12/18
Precaution for Use
1. The chips should not be used directly in any type of fluid such as water, oil, organic solvent,
etc.
2. When the LEDs are illuminating, the maximum ambient temperature should be first
considered before operation.
3. LEDs must be stored in a clean environment. A sealed container with a nitrogen atmosphere
is necessary if the storage period is over 3 months after shipping.
4. The LEDs must be used within 72 hrs after unpacked. Unused products must be repacked in
an anti-electrostatic package, folded to close any opening and then stored in a dry and cool
space.
5. The appearance and specifications of the products may be modified for improvement without
further notice.
6. The LEDs are sensitive to the static electricity and surge. It is strongly recommended to use a
grounded wrist band and anti-electrostatic glove when handling the LEDs.If a voltage over the
absolute maximum rating is applied to LEDs, it will damage LEDs.Damaged LEDs will show
some abnormal characteristics such as remarkable increase of leak current, lower turn-on
voltage and getting unlit at low current.
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 13/18
Packaging
Tape Dimension
Dim. A
Dim. B
Dim. C
Q’ty/Reel
3.95±0.05
1.25±0.05
0.55±0.05
1K
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 14/18
Reel Dimension
Packing
5 boxes per carton is available depending on shipment quantity.
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 15/18
Dry Pack
All SMD optical devices are MOISTURE SENSITIVE. Avoid exposure to moisture at all times
during transportation or storage. Every reel is packaged in a moisture protected anti-static bag.
Each bag is properly sealed prior to shipment.
Upon request, a humidity indicator will be included in the moisture protected anti-static bag prior to
shipment.
The packaging sequence is as follows:
Baking
It’s recommended to bake before soldering once the pack is unsealed open & re-sealed after 72
hours. The conditions are as followings:
1. 60 ±3OC×(12~24hrs) and < 5% RH, taped reel type
2. 100±3OC×(45min~1hr), bulk type
3. 130±3OC×(15~30min), bulk type
Precautions
1. Avoid exposure to moisture at all times during transportation or storage.
2. Anti-Static precaution must be taken when handling GaN, InGaN, and AlInGaP products.
3. It is suggested to connect the unit with a current limiting resistor of the proper size. Avoid
applying a reverse voltage beyond the specified limit.
4. Avoid operation beyond the limits as specified by the absolute maximum ratings.
5. Avoid direct contact with the surface through which the LED emits light.
6. If possible, assemble the unit in a clean room or dust-free environment.
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 16/18
Handling of Silicone Resin LEDs
Handling Indications
During processing, mechanical stress on the surface should be minimized as much as possible.
Sharp objects of all types should mot be used to pierce the sealing compound.
Figure 1
In general, LEDs should only be handled from the side. By the way ,this also applies to LEDs
without a silicone sealant, since the surface can also become scratched.
Figure 2
When populating boards in SMT production, there are basically no restrictions regarding the from
of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be
prevented.
This is assured by choosing a pick and place nozzle which is large than LEDs reflector area.
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 17/18
Reflow Soldering
Recommend soldering paste specifications:
1. Operating temp.: Above 220 OC ,60sec
2. Peak temp.:260 OCMax.,10sec Max.
3. Reflow soldering should not be done more than two times.
4. Never take next process until the component is cooled down to room temperature after
reflow.
5. The recommended reflow soldering profile (measuring on the surface of the LED terminal) is
following:
Lead-free Solder Profile
Reworking
Rework should be completed within 5 seconds under 260 OC.
The iron tip must not come in contact with the copper foil.
Twin-head type is preferred.
Cleaning
Following are cleaning procedures after soldering:
An alcohol-based solvent such as isopropyl alcohol (IPA) is recommended.
Temperature x Time should be 50oC x 30sec. or <30oC x 3min
Ultrasonic cleaning: < 15W/ bath; bath volume ≤ 1liter
Curing: 100 OC max, <3min
PLCC Side View(Back light) LED
F1041SP Series
F1071SP--20P-000542
Official Product
Tentative Product
****************
****************
Specifications are subject to changes for improvement
without advance notice. Proprietary data, drawings, company
confidential all rights reserved.
01/13/2014
Version of 1.0
Page 18/18
Cautions of Pick and Place
Avoid stress on the resin at elevated temperature.
Avoid rubbing or scraping the resin by any object.
Electric-static may cause damage to the component. Please ensure that the equipment is
properly grounded. Use of an ionizer fan is recommended.
Revision History
Rev.
Descriptions
Date
Page
1.0
-
01/13/2014
-