5.0SMDJ15A-001T13 - LITTELFUSE - Datasheet.Directory

Speciﬁcations are subject to change without notice.

Revised: 08/26/20

TVS Diodes

Surface Mount – 5000W > 5.0SMDJ series

Agency Agency File Number

E230531

The 5.0SMDJ series is designed specifically to protect

sensitive electronic equipment from voltage transients

induced by lightning and other transient voltage events.

TVS devices are ideal for the protection of I/O Interfaces,

VCC bus and other vulnerable circuits used in Telecom,

Computer, Industrial and Consumer electronic

applications.

Applications

Features

Maximum Ratings and Thermal Characteristics

(TA=25OC unless otherwise noted)

Agency Approvals

• 5000W peak pulse power

capability at 10/1000μs

waveform, repetition rate

(duty cycles):0.01%

• SMD low proﬁle

surface mount package

minimizing PCB footprint

• Typical failure mode is

short from over-speciﬁed

voltage or current

• Whisker test is conducted

based on JEDEC

JESD201A per its table 4a

and 4c

• IEC 61000-4-2 ESD

30kV(Air), 30kV (Contact)

• ESD protection of data

lines in accordance with

IEC 61000-4-2

• EFT protection of data

lines in accordance with

IEC 61000-4-4

• Built-in strain relief

• Glass passivated chip

junction

• Fast response time:

typically less than 1.0ps

from 0V to BV min

• Excellent clamping

capability

• Low incremental surge

resistance

• Typical IR less than 5μA

when VBR min>22V

• High temperature

to reﬂow soldering

guaranteed: 260°C/40sec

• VBR @ TJ= VBR@25°C

x (1+αT x (TJ - 25))

(αT:Temperature

Coefﬁcient,)

• UL Recognized compound

meeting ﬂammability

rating V-0

• Meet MSL level1, per

J-STD-020, LF maximun

peak of 260°C

• Matte tin lead–free plated

• Halogen free and RoHS

compliant

• Pb-free E3 means 2nd

level interconnect is

Pb-free and the terminal

ﬁnish material is tin(Sn)

(IPC/JEDEC J-STD-

609A.01)

• Recognized to UL 497B as

an Isolated Loop Circuit

Protector

Parameter Symbol Value Unit

Peak Pulse Power Dissipation at TL=25OC by

10/1000µs Waveform (Fig.2)(Note 1), (Note 2) PPPM 5000 W

Power Dissipation on Inﬁnite Heat Sink at

TL=50OCPD6.5 W

Peak Forward Surge Current, 8.3ms Single Half

Sine Wave (Note 3) IFSM 300 A

Maximum Instantaneous Forward Voltage at

100A for Unidirectional Only VF5.0 V

Operating Temperature Range TJ-65 to 150 °C

Storage Temperature Range TSTG -65 to 175 °C

Typical Thermal Resistance Junction to Lead RƟJL 15 °C/W

Typical Thermal Resistance Junction to Ambient RƟJA 75 °C/W

Description

5.0SMDJ Series

Functional Diagram

Bi-directional

Uni-directional

Cathode Anode

Uni-directional

Bi-directional

RoHS

Datasheet

Additional Infomarion

Resources

Samples

Notes:

1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3.

2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.

3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional component only, duty

cycle = 4 per minute maximum.

Speciﬁcations are subject to change without notice.

Revised: 08/26/20

TVS Diodes

Surface Mount – 5000W > 5.0SMDJ series

Electrical Characteristics (TA=25°C unless otherwise noted)

For bidirectional type having VR of 20 volts and less, the IR limit is double.

For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts, the parts without A are currently available, but not recommended for new designs. The parts with A are preferred.

Part

Number

(Uni)

Part

Number

(Bi)

Marking Reverse

Stand off

Voltage VR

(Volts)

Breakdown

Voltage VBR

(Volts) @ IT

Test

Current

(mA)

Maximun

Clamping

Voltage

VC@IPP

(10/1000μs)

(V)

Maximum

Peak

Pulse

Current IPP

(10/1000μs)

(A)

Maximum

Clamping

Voltage

VC@IPP

(8/20µs)

(V)

Maximum

Peak

Pulse

Current

IPP(8/20μs)

(A)

Maximum

Reverse

Leakage

IR@VR

(µA)

Maximum

Temperature

Coefﬁcient

of VBR (%/C)

Agency

Approval

Uni Bi Min. Max.

5.0SMDJ12A 5.0SMDJ12CA 5PEP 5BEP 12.0 13.3 14.7 10 19.9 252.0 25.7 1890.0 800 0.075 X

5.0SMDJ13A 5.0SMDJ13CA 5PEQ 5BEQ 13.0 14.4 15.9 10 21.5 233.0 27.8 1747.5 500 0.076 X

5.0SMDJ14A 5.0SMDJ14CA 5PER 5BER 14.0 15.6 17. 2 10 23.2 216.0 30.0 1620.0 200 0.08 X

5.0SMDJ15A 5.0SMDJ15CA 5PES 5BES 15.0 16.7 18.5 1 24.4 205.0 31.5 1537.5 100 0.083 X

5.0SMDJ16A 5.0SMDJ16CA 5PET 5BET 16.0 17. 8 19.7 1 26.0 193.0 33.6 1447.5 50 0.084 X

5.0SMDJ17A 5.0SMDJ17CA 5PEU 5BEU 17. 0 18.9 20.9 1 27.6 181.0 35.7 1357.5 20 0.085 X

5.0SMDJ18A 5.0SMDJ18CA 5PEV 5BEV 18.0 20.0 22.1 1 29.2 172.0 37.7 1290.0 10 0.088 X

5.0SMDJ20A 5.0SMDJ20CA 5PEW 5BEW 20.0 22.2 24.5 1 32.4 155.0 41.9 850.0 5 0.091 X

5.0SMDJ22A 5.0SMDJ22CA 5PEX 5BEX 22.0 24.4 26.9 1 35.5 141.0 45.9 1057.5 5 0.092 X

5.0SMDJ24A 5.0SMDJ24CA 5PEZ 5BEZ 24.0 26.7 29.5 1 38.9 129.0 50.3 967.5 5 0.092 X

5.0SMDJ26A 5.0SMDJ26CA 5PFE 5BFE 26.0 28.9 31.9 1 42.1 119.0 54.4 892.5 5 0.093 X

5.0SMDJ28A 5.0SMDJ28CA 5PFG 5BFG 28.0 31.1 34.4 1 45.4 110.0 58.7 825.0 5 0.094 X

5.0SMDJ30A 5.0SMDJ30CA 5PFK 5BFK 30.0 33.3 36.8 1 48.4 103.0 62.5 772.5 5 0.096 X

5.0SMDJ33A 5.0SMDJ33CA 5PFM 5BFM 33.0 36.7 40.6 1 53.3 93.9 68.9 704.3 5 0.097 X

5.0SMDJ36A 5.0SMDJ36CA 5PFP 5BFP 36.0 40.0 44.2 1 58.1 86.1 75.1 645.8 5 0.098 X

5.0SMDJ40A 5.0SMDJ40CA 5PFR 5BFR 40.0 44.4 49.1 1 64.5 77.6 83.3 582.0 5 0.099 X

5.0SMDJ43A 5.0SMDJ43CA 5PFT 5BFT 43.0 47.8 52.8 1 69.4 72.1 89.7 540.8 5 0.1 X

5.0SMDJ45A 5.0SMDJ45CA 5PFV 5BFV 45.0 50.0 55.3 1 72.7 68.8 93.9 516.0 5 0.101 X

5.0SMDJ48A 5.0SMDJ48CA 5PFX 5BFX 48.0 53.3 58.9 1 77.4 64.7 100.0 485.3 5 0.101 X

5.0SMDJ51A 5.0SMDJ51CA 5PFZ 5BFZ 51.0 56.7 62.7 1 82.4 60.7 106.5 455.3 5 0.101 X

5.0SMDJ54A 5.0SMDJ54CA 5PGE 5BGE 54.0 60.0 66.3 1 87.1 57.5 112.5 431.3 5 0.102 X

5.0SMDJ58A 5.0SMDJ58CA 5PGG 5BGG 58.0 64.4 71.2 1 93.6 53.5 120.9 401.3 5 0.103 X

5.0SMDJ60A 5.0SMDJ60CA 5PGK 5BGK 60.0 66.7 73.7 1 96.8 51.7 125.1 387.8 5 0.103 X

5.0SMDJ64A 5.0SMDJ64CA 5PGM 5BGM 64.0 71.1 78.6 1 103.0 48.6 133.1 364.5 5 0.104 X

5.0SMDJ70A 5.0SMDJ70CA 5PGP 5BGB 70.0 77.8 86.0 1 113.0 44.3 146.0 332.3 5 0.105 X

5.0SMDJ75A 5.0SMDJ75CA 5PGR 5BGR 75.0 83.3 92.1 1 121.0 41.4 156.3 310.5 5 0.106 X

5.0SMDJ78A 5.0SMDJ78CA 5PGT 5BGT 78.0 86.7 95.8 1 126.0 39.7 162.8 297.8 5 0.106 X

5.0SMDJ85A 5.0SMDJ85CA 5PGV 5BGV 85.0 94.4 104.0 1 137.0 36.5 177.0 273.8 5 0.106 X

5.0SMDJ90A 5.0SMDJ90CA 5PGX 5BGX 90.0 100.0 111.0 1 146.0 34.3 188.6 257.3 5 0.107 X

5.0SMDJ100A 5.0SMDJ100CA 5PGZ 5BGZ 100.0 111.0 123.0 1 162.0 30.9 209.3 231.8 5 0.107 X

5.0SMDJ110A 5.0SMDJ110CA 5PHE 5BHE 110.0 122.0 135.0 1 177.0 28.3 228.7 212.3 5 0.107 X

5.0SMDJ120A 5.0SMDJ120CA 5PHG 5BHG 120.0 133.0 147.0 1 193.0 26.0 249.4 195.0 5 0.108 X

5.0SMDJ130A 5.0SMDJ130CA 5PHK 5BHK 130.0 144.0 159.0 1 209.0 24.0 270.0 180.0 5 0.108 X

5.0SMDJ140A 5.0SMDJ140CA 5PHL 5BHL 140.0 156.0 172.0 1 226.1 22.2 292.1 166.5 5 0.108 X

5.0SMDJ150A 5.0SMDJ150CA 5PHM 5BHM 150.0 167.0 185.0 1 243.0 20.6 314.0 154.5 5 0.108 X

5.0SMDJ160A 5.0SMDJ160CA 5PHP 5BHB 160.0 178.0 197.0 1 259.0 19.3 334.6 144.8 5 0.108 X

5.0SMDJ170A 5.0SMDJ170CA 5PHR 5BHR 170.0 189.0 209.0 1 275.0 18.2 355.3 136.5 5 0.108 X

Speciﬁcations are subject to change without notice.

Revised: 08/26/20

TVS Diodes

Surface Mount – 5000W > 5.0SMDJ series

I-V Curve Characteristics

Voltage Transients

Time

Voltage Across TVS

Current Through TVS

Voltage or Current

Figure 1 - TVS Transients Clamping Waveform

Ratings and Characteristic Curves (TA=25°C unless otherwise noted)

Figure 2 - Peak Pulse Power Rating

100

1000

0.01 0.1110

-Pulse Width (ms)

PPM

-Peak Pulse Power (KW)

0.001

5kW at 10/1000

µs, 25°C

TJ initial = Tamb

Vc VBR VR

Ipp

Uni-directional

Vc V

Bi-directional

PPPM Peak Pulse Power Dissipation -- Max power dissipation

VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation

VBR Breakdown Voltage -- Maximum voltage that ﬂows though the TVS at a speciﬁed test current (IT)

VC Clamping Voltage -- Peak voltage measured across the TVS at a speciﬁed Ippm (peak impulse current)

IR Reverse Leakage Current -- Current measured at VR

VF Forward Voltage Drop for Uni-directional

Speciﬁcations are subject to change without notice.

Revised: 08/26/20

TVS Diodes

Surface Mount – 5000W > 5.0SMDJ series

IPPM- Peak Pulse Current, % IRSM

100

150

1.0 2.0 3.0 4.0

tr=10µsec

Peak Value

IPPM

TJ=25°C

Pulse Width(td) is deﬁned

as the point where the peak

current decays to 50% of IPPM

10/1000µsec. Waveform

as deﬁned by R.E.A

t-Time (ms)

Half Value

IPPM ( )

Cj(pF)

-Reverse Breakdown Voltage(V)

100

1000

10000

100000

10 100 1000

Uni-direconal V=0V

Bi-direconal V=0V

Uni/Bi-direconal V=

Figure 4 - Pulse Waveform

Figure 5 - Typical Junction Capacitance

100

150

200

250

300

350

400

450

110100

IFSM - Peak Forward Surve Current(A)

Number of Cycles at 60 Hz

Figure 7 - Maximum Non-Repetitive Peak Forward

Surge Current Uni-Directional Only

Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued)

Figure 3 - Peak Pulse Power Derating Curve

100

0255075100 125 175

Peak Pulse Power (PPP) or Current (IPP)

Derating in Percentage %

150

TJ - Initial Junction Temperature (ºC)

0.01

0.1

100

0.0010.010.1 110100 1000

Transient Thermal Impedance (

C/W)

T -Pulse Duration (s)

Figure 6 - Typical Transient Thermal Impedance

0.01

0.1

100

0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00

VF-Peak Forward Voltage (V)

IF-Peak Forward Current(A)

Figure 8 - Peak Forward Voltage Drop vs Peak Forward

Current (Typical Values)

Speciﬁcations are subject to change without notice.

Revised: 08/26/20

TVS Diodes

Surface Mount – 5000W > 5.0SMDJ series

Physical Speciﬁcations

Weight 0.007 ounce, 0.21 grams

Case JEDEC DO214AB. Molded component over

glass passivated junction

Polarity Color band denotes positive end (cathode)

except Bidirectional.

Terminal Matte Tin-plated leads, Solderable per

JESD22-B102

Dimensions

Dimensions Inches Millimeters

Min Max Min Max

A0.114 0.126 2.900 3.200

B0.260 0.280 6.600 7. 110

C0.220 0.245 5.590 6.220

D0.079 0.103 2.060 2.620

E0.030 0.060 0.760 1.520

F- 0.008 - 0.203

G0.305 0.320 7.750 8.130

H0.006 0.012 0.152 0.305

I0.129 - 3.300 -

J0.094 - 2.400 -

K- 0.165 - 4.200

L0.094 - 2.400 -

Soldering Parameters

Temperature (T)

Time (t)

Ts(min)

Ts(max)

Preheat

Ramp-up Critical Zone

TL to TP

Ramp-down

t 25˚C to Peak

25˚C

Reﬂow Condition Lead–free assembly

Pre Heat

- Temperature Min (Ts(min))150°C

- Temperature Max (Ts(max))200°C

- Time (min to max) (ts)60 – 180 secs

Average ramp up rate (Liquidus Temp (TA) to peak 3°C/second max

TS(max) to TA - Ramp-up Rate 3°C/second max

Reﬂow - Temperature (TL) (Liquidus) 217°C

- Time (min to max) (tL)60 – 150 seconds

Peak Temperature (TP)260+0/-5 °C

Time within 5°C of actual peak Temperature (tp)20 – 40 seconds

Ramp-down Rate 6°C/second max

Time 25°C to peak Temperature (TP)8 minutes Max.

Do not exceed 280°C

(all dimensions in mm)

Solder Pads

Environmental Speciﬁcations

High Temp. Storage JESD22-A103

HTRB JESD22-A108

Temperature Cycling JESD22-A104

MSL JEDEC-J-STD-020, Level 1

H3TRB JESD22-A101

RSH JESD22-A111

DO-214AB (SMC J-Bend)

Dimensions in inches and (millimeters)

Cathode Band

(for uni-directional products only)

Speciﬁcations are subject to change without notice.

Revised: 08/26/20

TVS Diodes

Surface Mount – 5000W > 5.0SMDJ series

Part Numbering System

Packaging Options

Part Marking System

Voltage

Bi-Directional

Voltage Tolerance

Series

5.0SMDJ XXX CA

Tape and Reel Speciﬁcation

Part number Component

Package Quantity Packaging

Option Packaging Speciﬁcation

5.0SMDJxxxXX DO-214AB 3000 Tape & Reel - 16mm tape/13” reel EIA STD RS-481

5.0SMDJxxxXX-T7 DO-214AB 500 Tape & Reel – 16mm tape/7” reel EIA STD RS-481

0.63

(16.0)

0.315

(8.0)

0.157

(4.0)

0.65

(16.4)

0.80 (20.2)

Arbor Hole Dia.

Optional

7” 7.0 (187)

13” 13.0 (330) Dimensions are in inches

(and millimeters).

Direction of Feed

0.059 DIA

(1.5) Cover tape

Cathode

XXX

YMXXX

Marking Code

Trace Code Marking

Y:Year Code

M: Month Code

XXX: Lot Code

Littelfuse Logo

Cathode Band

(for uni-directional products only)

Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are

not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.