PAGE . 1
February 19,2013-REV.01
GS1AWG SERIES
FEATURES
• For surface mounted applications in order to optimize board space
• Easy pick and place
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
• Low Forward Drop
• High temperature soldering : 260°C /10 seconds at terminals
• Glass Passivated Junction
• Lead free in comply with EU RoHS 2011/65/EU directives
• Green molding compound as per IEC61249 Std. . (Halogen Free)
MECHANICAL DA T A
• Case: SMA(W) molded plastic
• Terminals: Solder plated, solderable per MIL-STD-750,Method 2026
• Polarity: Indicated by cathode band
• Standard packaging: 12 mm tape (EIA-481)
• Weight: 0.002 ounce, 0.064 gram
SURF ACE MOUNT GENERAL PURPOSE RECTIFIER
MAXIMUM RA TINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
NOTES : 1. Mounted on an FR4 PCB, single-sided copper, mini pad.
2. Mounted on an FR4 PCB, single-sided copper, with 76.2 x 114.3mm copper pad area.
VOLTAGE 50 to 1000 Volts 1 Amperes
CURRENT
PARAMETER SYMBOL
GS1AWG GS1BWG GS1DWG GS1GWG GS1JWG GS1KWG GS1MWG
UNITS
Maximum Recurrent Peak Reverse Voltage V
RRM
50 100 200 400 600 800 1000 V
Maximum RMS Voltage V
RMS
35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage V
DC
50 100 200 400 600 800 1000 V
Maximum Average Forward Current I
F(AV)
1A
Peak Forward Surge Current : 8.3ms single half sine-
wave superimposed on rated load (JEDEC method) I
FSM
30 A
Maximum Forward Voltage at 1A DC V
F
1.1 V
Maximum DC Reverse Current at Rated DC
Blocking Voltage I
R
1A
Typical Junction Capacitance Measured at 1MHz and
applied V
R
=4.0V C
J
7pF
Typical Junction Resistance (Note 1)
(Note 2) R
JA
R
JL
150
15
O
C / W
Operating and Storage Temperature Range T
J
,T
STG
-55 to +150
O
C
12
Cathode Anode
PAGE . 2
February 19,2013-REV.01
GS1AWG SERIES
0
0.2
0.4
0.6
0.8
1
1.2
0 25 50 75 100 125 150
TC, Case Temperature (°C)
IF, Forward Current (A)
Fig.3 Typical Reverse Characteristics Fig.4 Typical Forward Characteristics
Fig.1 Forward Current Derating Curve Fig.2 Typical Junction Capacitance
1
10
110100
CJ, Junction Capacitance (pF)
VR, Reverse Bias Voltage (V)
0.01
0.1
1
0.2 0.7 1.2
IF, Forward Current (A)
VF, Forward Voltage (V)
TJ= 125°C
TJ= 150°C
TJ= 25°C
TJ= 75°C
0.01
0.1
1
10
100
100 200 300 400 500 600 700 800 900 1000
IR, Reverse Current (uA)
VR, Rated Peak Reverse Voltage (V)
TJ =
TJ= 150°C
TJ= 25°C
TJ= 75°C
TJ = 125°C
TJ= 150°C
25
20
15
10
5
0
12610 20 40 60 100
30
8.3ms Single Half Sine-Wave
JEDEC Method
Fig.5-Maximum Non-Repetitive Peak Forward Surge
Current
Number Of Cycles At 60Hz
Peak Forward Surge Current (A)
PAGE . 3
February 19,2013-REV.01
GS1AWG SERIES
MOUNTING PAD LAYOUT
ORDER INFORMA TION
• Packing information
T/R - 7.5K per 13" plastic Reel
T/R - 1.8K per 7" plastic Reel
PAGE . 4
February 19,2013-REV.01
GS1AWG SERIES
Part No_pa cking code _V ersion
GS1AWG_R1_00001
GS1AWG_R2_00001
For example :
RB500V-40_R2_00001
Part No. Serial number
Version code means HF
Packing size code means 13"
Packing type means T/R
Packing Code XX Version C ode XXXXX
Packing type 1
st
Code Pac king size co de 2
nd
Code HF or RoHS 1
st
Code 2
nd
~5
th
Code
Tape and Ammunition Box
(T/B) AN/A 0HF 0 s er ial num ber
Tape and R e el
(T/ R) R7" 1RoHS 1 ser ial num ber
B ulk Pa cking
(B/P) B13" 2
Tu be P ack ing
(T/P) T26mm X
Tape and Reel (Right Oriented)
(TRR) S52mm Y
Tape and Reel (Left Oriented)
(TRL) LPANASERT T/B CATHODE UP
(PBCU) U
FORMING FPANASERT T/B CATHODE DOWN
(PBCD) D
PAGE . 5
February 19,2013-REV.01
GS1AWG SERIES
Disclaimer
•Re producing a nd modifying information of the document is prohibited without permission
from Panjit International Inc..
•Pa njit International Inc. re serves the rights to ma ke changes of the content herein the
document a nytime without notif ication. Please refer to our website f or the latest
document.
Pa njit International Inc. disclai ms any a nd all li ability arising out of the application or use of
a ny product including da mages incidentally a nd consequentially occurred.
•Pa njit International Inc. does not assume any a nd all implied warranties, including warra nties
of fitness f or particular purpose, non-infringement a nd mercha ntability.
•Applications shown on the herein document are examples of sta ndard use a nd operation.
Customers are respon sible in comprehending the suitable use in particular application s.
Pa njit Internation al Inc. ma kes no representation or warra nty that such a pplications will be
suitable for the specified use without further testing or modification.
•The products shown herein are not de signed a nd authorized for equi pments requiring high
level of reli ability or relating to huma n life a nd for a ny applications concerning life-saving
or life-sustaining, such as medical instruments, tra nsportation equi pment, aerospa ce
ma chinery et cetera. Customers using or selling the se products for use in such application s
do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages
resulting from such improper use or sale.
•
•Since Panjit uses lot number as the tracking base, please provide the lot number for tracking
when complaining.
