H-MOSS® Occupancy Sensors
Wall Switch Occupancy Sensors - Passive Infrared
www.hubbell-wiring.com
Wiring Device-Kellems
®
Hubbell WS/ATP series wall switches combine PIR sensing
technology, photocell control, and Hubbell‘s patented three
wire method to provide the perfect light switch replacement
solution. These sensors do not require a neutral connection
and they have no minimum load requirements. The WS series
has manual timer adjustment while the ATP series incorporates
Hubbell‘s patented adaptive technology to automatically set
timing and eliminate manual adjustments.
The sensors come supplied with color matched faceplates.
Manual-on versions are available for enhanced savings.
Four wire models support installations that require a neutral
connection.
Features and Benets
Features Benets
Device depth of 1" Utilize with any existing wall
switch box.
No Neutral Required No need to pull neutrals -
makes retrots simple.
Neutral Option Available Comply with NEC® 2011 and
local codes.
Photocell Included
(ATP/WS2000 series)
Utilizing available light enables
additional savings.
Patented adaptive
technology (ATP series)
Eliminates the need for manual
adjustments and enhances
instillation efciency.
Key Features
Common Features
• Passive infrared sensing technology
• LED lighting compatible
• No neutral required
• 1200 sq. ft. coverage
• Tamper resistant lens
• Metal mounting strap
• Shallow 1" depth
• Nylon wallplate included
• cUL Listed, cULus, CEC Title 24 Certied
WS1000 Series
• 120V AC operation
• Manual adjustment time delay (20 sec. to 30 min.)
WS2000 Series
• Dual 120/277V AC operation
• 3-way capable
• Selectable manual/auto-on operation
• Built in photocell for daylight harvesting
• Manual adjustment time delay (20 sec. to 30 min.)
ATP Series
All WS2000 series features plus:
• Adaptive technology - “Install and forget” operation
Applications
• Private Ofces
• Small Restrooms
• Break Areas
• Classrooms
• Closets and Storage Areas
Hubbell Motion Sensing Switches
®
H-MoSS
H-MoSS®
H
u
b
b
e
l
l
M
o
t
i
o
n
S
e
n
s
i
n
g
S
w
i
t
c
h
e
s
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
H-MOSS® Occupancy Sensors
Wall Switch Occupancy Sensors - Passive Infrared Wiring Device-Kellems
®
www.hubbell-wiring.com
Hubbell Wiring Systems • Hubbell Incorporated (Delaware) • 40 Waterview Drive • Shelton, CT 06484 • Phone (800) 288-6000 • FAX (800) 255-1031
Printed in U.S.A. Specications subject to change without notice.
H-MOSS® is a registered trademark of Hubbell Incorporated. WLDSHM028 4/13
Coverage Patterns
Dimensions Inches (mm)
Wiring Schematics
12'
16'
12'
16'
40'
20'
Mounting Height
48" (121.9 cm)
20' (6.1m)
40' (12.2m)
Adaptive Technology, Passive Infrared
Description Color Standard w/ Nightlight w/ Neutral
w/ Nightlight
and Neutral
Adaptive auto-adjusting;
selectable manual/auto-on
operation; dual-voltage
120/277V; 3-way capable
Gray ATP2000GY ATP2000NGY
Ivory ATP2000I ATP2000NI ATP2004I ATP2004NI
Light Almond ATP2000LA ATP2000NLA
White ATP2000W ATP2000NW ATP2004W ATP20 04NW
Manual adjusting; selectable
manual/auto-on operation;
dual-voltage 120/277V;
3-way capable
Gray WS2000GY WS2000NGY
Ivory WS2000I WS2000NI WS2004I WS2004NI
Light Almond WS2000LA WS2000NLA
White WS2000W WS2000NW WS2004W WS2004NW
Manual adjusting;
auto-on operation;
120V AC only
Ivory WS1000I WS1000NI
White WS1000W WS1000NW
Manual adjusting;
Manual-on operation;
120V AC only
Ivory WS1001I WS1001NI
White WS1001W WS1001NW
Vertical Coverage
Major Motion: PIRPIR
Minor Motion:
Specications
Electrical ATP/WS2000 Series WS1000 Series
Power Supply 120/277V AC, 60Hz 120V AC, 60Hz
Load Capacity
Incandescent 0 to 1000 watts 0 to 500 watts
120V Ballast 0 to 1000 watts 0 to 500 watts
277V Ballast 0 to 1800 watts N/A
Agency Approvals
Warranty
cUL Listed
5 years
UL Listed, cULus Certified
5 years
Physical ATP/WS2000 and WS1000 Series
Housing Flame retardant UL 94 V-0 ABS
Lens Polyethylene
Dimensions Face 2.59"H x 1.30"W, 0.61"D (from wall out)
Mounting Height 42 to 54 inches above floor
Sensing Indicator ATP/WS2000 and WS1000 Series
Passive Infrared Red LED
Environmental ATP/WS2000 and WS1000 Series
Operating 32°F to 122°F (0°C to 50°C) with rate of change not
exceeding 20°F (11°C) per hour; 20% to 90%
non-condensing relative humidity
Storage -40°F to 150°F (-40°C to 65°C);
20% to 90% non condensing relative humidity
Controls ATP/WS2000 Series WS1000 Series
Time Delay ATP: auto
WS: Manual 20s - 30min
Manual 20 seconds to 30
minutes
Ambient Light Digital, pushbutton,
10 to 500 foot candles
n/a
Front Press Switch On/Off On/Off
Service Switch Off (service)
Vac (manual-on)
Occ (auto-on)
Off (service)
On (normal operation)
Hot
Hot
Ground
Ground
Green
Green Green
Yellow
Neutral
Neutral
Red
Normal Wiring
3-Way Wiring
White (Neutral Versions Only)
Black White
Black
Red Red
Yellow
White (Neutral
Version Only) Load
Load
ATP/WS2000
Only
ATP/WS2000 Only
Hot
Hot
Ground
Ground
Green
Green Green
Yellow
Neutral
Neutral
Red
Normal Wiring
3-Way Wiring
White (Neutral Versions Only)
Black White
Black
Red Red
Yellow
White (Neutral
Version Only) Load
Load
ATP/WS2000
Only
ATP/WS2000 Only
Note: * Load can not exceed the rating of one switch.
Normal Wiring
Sensors Wired
as 3-Way Sensors*
(ATP/WS2000 Only)
4.15
(105.4)
1.82
(46.2)
3.81
(96.8)
3.28
(83.3)
.61
(15.5)
1.01
(25.6)
#18 AWG WIRES,
6.0 (152)
MIN. LONG
