ca_D1-D102:Layout 1 2/10/11 11:51 AM Page 1 ca_D1-D102:Layout 1 2/10/11 11:51 AM Page 24 Micro-D Coaxial/Power - .050" Contact Spacing MDM C/P MDM Coaxial The MDM Metal Shell Connectors have been tooled in several coaxial layouts and offer the versatility of combining coaxial and signal lines in the same connector. Any modifications to these layouts or new requirements, please consult the factory. Standard coax is RG178 white. MDM Power The same insulator that is used with coaxial contacts is available with power contacts. This offers the versatility of combining power and signal lines in the same connector. MDM Coaxial/Power Power and coaxial contacts can be interchanged as desired. Power contacts are rated at 13 amps, 24V rms, AWG #16 stranded. For MIL-DTL-83513 ordering information see pages 16 and 17 R MDM - 51 H P 001 P - XXX RoHS COMPLIANCE SERIES MDM: (Size 9-100) Liquid Crystal Polymer (LCP) MDM: (Combo Layout) Diallyl Phthalate (DAP) SERIES CONTACT ARRANGEMENTS CONTACT TYPE CONTACT ARRANGEMENTS TERMINATION TYPE 9-15-21-25-31-37-51-100 (standard) 16C5, 10C10, 7C2, 24C4 (coaxial) TERMINATION CODE 16P5, 10P10, 7P2, 24P4 (power) or combination of HARDWARE coax and power SHELL FINISH MOD CODES CONTACT TYPE P - Pin S - Socket F - Float mount B - No hardware standard TERMINATION TYPE .091 (2.31) dia. hole for sizes 9-51; H - Harness-insulated wire. .120 (3.05) dia. hole for size 100. L - Solid-uninsulated wire. A - .125 (3.18) dia. mounting holes for sizes 9-51; S - Solder pot to accept #26 AWG MAX. .166 (4.22) dia. hole for size 100. harness wire. (Not available with power B1 - .1475 (3.75) dia. hole for size 100 contact arrangements.) (Per MIL-DTL-83513) } HARDWARE M - Military specification hardware, see page 11 for military hardware codes. P - Jackpost K - Jackscrew-standard profile L - Jackscrew-low profile TERMINATION CODE* (H) 001 - 18",7/34 strand,#26 AWG, MIL-W-16878/4, Type E Teflon, yellow. (H) 003 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. (L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper. (L) 2 - 1" uninsulated solid #25 AWG gold plated copper. SHELL FINISH MOD CODES No Number - (Standard cadmium/yellow chromate over nickel A174 - Electroless nickel A172 - Gold over nickel A141 - Irridite/alodine A30 - Black anodize *See pages D-98 to D-102 for additional Termination codes. 7C2/7P2 .186 (4.92) MAX. 1.185 (30.10) MAX. 308 (7.82) MAX .965 .005 (24.51 0.13) + Microminiature D .965 .005 (24.51 0.13) .416 (10.57) MAX. + .308 (7.82) MAX. .100 (2.54) MAX. .091 .003 DIA. (2.31 0.08) .199 (5.05) MAX. 1.185 (30.10) MAX. .800 (20.32) MAX. Plug + + .091 .003 DIA. (2.31 0.08) .429 (10.90) MAX. Receptacle .100 (2.54) MAX. .800 (20.32) MAX. 24C4/24P4 .186 (4.92) MAX. 1.435 (36.45) MAX. .351 (8.92) MAX. + 1.215 .005 (30.86 0.13) .351 (8.92) MAX. + .091 .003 DIA. (2.31 0.08) .199 (5.05) MAX. 1.435 (36.45) MAX. 1.215 .005 (30.86 0.13) .416 (10.51) MAX. .100 (2.54) MAX. Plug 1.050 (26.67) MAX. + + .091 .003 DIA. (2.31 0.08) Power Contacts .429 (10.90) MAX. .100 (2.54) MAX. 1.050 (26.67) MAX. Receptacle Coaxial Contacts BACK POTTING REQUIRED .350 (8.89) MAX. Plug Receptacle Receptacle Plug Dimensions shown in inches (mm) Specifications and dimensions subject to change D-24 www.ittcannon.com