DATA COMMUNICATION TRANSFORMER HDSL SERIES | | | | | | | | | | | | | | | FEATURES: * Supports Industry Standard HDSL/HDSL2 Transceivers * Conforms to ANSI, ITU and ETSI Standards Requirements * Operating Temperature Range of -40 C to 85C * Meets Standard Dielectric Withstanding Voltage Requirements STANDARD SPECIFICATIONS: Part Number* Line Rate (Kb/s) Turns Ratio** (Line:Chip) AHDL-101 784 1:1:1CT AHDL-102 1168 1:1:1CT AHDL-103 784 1:1:2CT AHDL-104 1168 1:1:1CT AHDL-105 784 1.8CT:1CT AHDL-106 1168 1:1:1CT AHDL-107 1168 1.8CT AHDL-108 1552 2.3:1 AHDL-109 1168 3:1 AHDL-110 272 1:1:1CT AHDL-111 416 1:1:1CT AHDL-112 528 1:1:1CT AHDL-201 1168 4:1 AHDL-202 784 1:1:1 AHDL-203 1168 1:1:1 AHDL-204 1168 2.3:1 AHDL-205 784 1.8:1CT AHDL-206 2320 1:1:1 AHDL-207 1552 2.3:1CT AHDL-211 784 3.7:1 OCL (Line) RL@Midband (dB) 20 40 - 200 KHz 12 2.0 mH 40 - 320 KHz 20 3.0 mH 40 - 200 KHz 16.5 2.0 mH 40 - 320 KHz 20 2.8 mH 40 - 200 KHz 16.5 2.0 mH 40 - 320 KHz 16.5 2.06 mH 40 - 320 KHz 18 2.0 mH 40 - 320 KHz 12 2.0 mH 40 - 320 KHz 15 8.0 mH 9 - 40 KHz 16.5 5.0 mH 20 - 80 KHz 16.5 3.5 mH 33 - 200 KHz 15.5 2.0 mH 40 - 500 KHz 16.5 3.0 mH 40 - 320 KHz 16.5 2.0 mH 40 - 320 KHz 16.5 2.0 mH 40 - 320 KHz 16.5 3.0 mH 40 - 320 KHz 16.5 1.0 mH 80 - 580 KHz 16.5 1.6 mH 20 - 560 KHz 14 3.0 mH 20 - 500 KHz 3.0 mH IL (dB) < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 1.0 40 KHz < 0.5 40 KHz Longitudinal Balance (dB) 55 40 - 320 KHz 55 40 - 320 KHz 55 5 - 196 KHz 55 40 - 320 KHz 50 5 - 196 KHz 55 40 - 320 KHz 50 40 - 320 KHz 65 40 - 320 KHz 65 40 - 320 KHz 65 40 - 320 KHz 65 40 - 320 KHz 65 40 - 320 KHz 50 40 - 500 KHz 55 40 - 320 KHz 55 40 - 320 KHz 55 40 - 320 KHz 50 40 - 320 KHz 55 40 - 580 KHz 55 20 - 560 KHz 50 40 - 300 KHz THD (dB) min PKG CIR -70 23x11 2 -70 23x11 3 -75 23x11 3 -75 23x11 3 -75 23x11 1 -70 23x11 2 -70 23x11 4 -70 23x11 2 -70 23x11 2 -70 23x11 3 -70 23x11 3 -70 23x11 3 -80 EP13 2 -70 EP13 2 -70 EP13 2 -70 EP13 2 -70 EP13 2 -70 EP13 2 -70 EP13 2 -80 EP13 5 ABRACON IS ISO 9001 / QS 9000 CERTIFIED rev1.1-8/04 Note: See next page. All specifications subject to change without notice. 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com DATA COMMUNICATION TRANSFORMER HDSL SERIES | | | | | | | | | | | | | | | TEST CONDITIONS: A. OCL: 100 mVRMS @ 10 KHz with appropriate IDC B. THD: 6 Vp-p @ 5 KHz with 135 C. Longitudinal Balance: frequency range specified with 135 D. DWV: 1,500 VRMS, greater voltage isolation available NOTES: * P/Ns with "S" as suffix are configured for surface mountable applications meeting standard industry reflow criteria **"CT" indicates a center-tapped winding, otherwise readings are intended to be across entire winding segment 1. Supports Level One SK70704/20/21 with DCR 3.2/6.0 IDC @ 75 mA 2. Supports Conexant BT8921/70 with DCR 2.0/2.0 , IDC @ 70 mA 3. Supports Conexant BT8952 with DCR 2.2/4.4 , IDC @ 160 mA 4. Supports Conexant BT8952 with DCR 2.2/4.4 , IDC @ 160 mA 5. Supports Level One SK70740/70741/70742 with DCR 2.2/2.2 , IDC @ 70mA 6. Supports Level One SK70704 with DCR 3.2/2.0 , IDC @ 75 mA, assumes pins 7-9 shorted externally 7. Supports Broadcom BCM6010 and Conexant BT8921/70, assumes pins 2 - 3, 7 - 9 are tied externally 8. Supports Conexant BT8960 9. Supports Conexant BT8970/RS8973 10. Supports M/SHDSL Globespan chip set 11. Dimensions: inches / mm; see spec sheet for tolerance limits 12. Specifications subject to change without notice PHYSICAL CHARACTERISTICS: EP13 THRU HOLE EP13 SMD 23x11 ABRACON ABRACON ABRACON CHIP:LINE rev1.1-8/04 ABRACON IS ISO 9001 / QS 9000 CERTIFIED 1 LINE:CHIP 2 CHIP:LINE 3 CHIP:LINE 4 4: LINE:CHIP 5 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com