FMS CONNECTOR 1.0mm Emboss Tape Connectors for FFC (.039") pitch Features ------------------------ * Compact This connector measures 1.0mm (.039") in pitch, 2.8mm (.110") in mounting height, and 6.3mm (.248") in width. * Double-sided contact This connector has highly resilient phosphor bronze contacts, each of which has two independent mating spring members that ensure continuity even when subjected to severe vibration. Because each of the contacts simultaneously mates with both sides of the FFC, the engineer has greater freedom in designing his circuitry. * Simple snap-in action The FFC is securely connected by simply inserting its leads into the connector. * SMT configuration The FMS series connectors are designed for surface mounting (SMT) and to meet the demand for high-density packaging. They are miniature connectors with a height of only 2.8mm (.110"), and can be supplied packaged in embossed tape to facilitate automatic mounting. Its housing is made of heat resistant resin so that it is not adversely affected during reflow soldering. Because of its tiny size and ability to be surface mounted, this connector meets the demand for high-density mounting of components inside electronic products. * Solder tabs This connector also features reinforcing solder tabs to prevent lifting of the connector during mating and unmating. Specifications ------------------- * Current rating: 0.5A AC, DC * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/20m max. After environmental testing/30m max. * Insulation resistance: 800M min. * Withstanding voltage: 500V AC/minute * Applicable FFC: Lead pitch /1.0mm(.039") Lead width /0.7mm(.028") Mating part thickness / 0.30 0.05mm(.012" .002") <Note>FFC to be actually used should be checked for applicability. * Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 542 FMS CONNECTOR Connector --------------------------------------------------------------- Circuits B 1.5 (.059) 6.3(.248) 5.3(.209) 0.4 (.016) 2.8(.110) A 1.0(.039) Dimensions mm(in.) Model No. A B Q'ty / reel 3 03FMS-1.0SP-TF 2.0(.079) 5.0(.197) 2,500 4 04FMS-1.0SP-TF 3.0(.118) 6.0(.236) 2,500 5 05FMS-1.0SP-TF 4.0(.157) 7.0(.276) 2,500 6 06FMS-1.0SP-TF 5.0(.197) 8.0(.315) 2,500 8 08FMS-1.0SP-TF 7.0(.276) 10.0(.394) 2,500 10 10FMS-1.0SP-TF 9.0(.354) 12.0(.472) 2,000 11 11FMS-1.0SP-TF 10.0(.394) 13.0(.512) 2,000 12 12FMS-1.0SP-TF 11.0(.433) 14.0(.551) 2,000 14 14FMS-1.0SP-TF 13.0(.512) 16.0(.630) 2,000 Material and Finish Contact: Phosphor bronze, copper-undercoated, tin/lead-plated Housing: PPS, UL94V-0 Solder tab: Brass, copper-undercoated, tin/lead-plated Note: The products listed above are supplied on embossed tape. Taping specifications ------------------------------------------------------ 1.550.05 (.061002)dia. 4.00.1 Feeding direction (.157.004) 2.00.1 (.079.004) Feeding direction 1.750.1 (.069.004) (3 to 8 circuits) Cover tape (10 to 14 circuits) 2.00.5 (.079.020) 2.5 W1 -+ 1.0 .098 ) ( +- .039 1.550.05 (.061002)dia. Feeding direction Feeding direction 4.00.1 (.157.004) 2.00.1 (.079.004) Cover tape Cover tape leader F0.1(.004) W0.3(.012) Carrier tape W0.3(.012) 8.00.1 (.315.004) 1.750.1 (.069.004) [13(.512)dia.] (S) W22.0(.079)dia. F0.1 (.004) Carrier tape (S) Leader part 100(3.937)min. The end part Connector 160(6.299)min. mounting part 400(15.748)min. Carrier tape 12.00.1 (.472.004) Circuits Taping dimensions mm(in.) F S W Reel dimensions mm(in.) Q'ty / reel W1 W2 3 to 4 5.5(.217) 4.75(.187) 12.0(.472) 13.5( .531) 330(12.992) 2,500 5 to 8 7.5(.295) 6.75(.266) 16.0(.630) 17.5( .689) 330(12.992) 2,500 10 to 14 11.5(.453) 10.75(.423) 24.0(.945) 25.5(1.004) 380(14.961) 2,000 Note: 1. Specifications conform to JIS C 0806. The tape width, connector recess dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. Specifications are subject to change without prior notice. 543 FMS CONNECTOR Lead section dimensions of FFC--------------------------------------------- [1.0(.039) x (Number of circuits + 1)] 0.12(.005) 1.0 0.15 (.039 .006) 0.3 0.05 (.012 .002) Conductor 0.7 0.1 (.028 .004) 10.0(.394) [1.0(.039) x (Number of circuits - 1)] 0.1(.004) 3.0 (.118)min. 1.0 0.15 (.039 .006) 1.0 0.1 (.039 .004) Reinforcing layer Base layer Cover layer PC board layout (viewed from component side) and Assembly layout ------------------ 2.5 0.1 (.098 .004) 0.750.1 1.00.05 (.030.004) (.039.002) 4.00.1 (.157.004) 6.3(.248) 5.3(.209) 0.80.1 (.031.004) FFC Note: 1. Tolerances are non-cumulative: 0.05mm(.002") for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 544 2.8(.110) 0.60.05 (.024.002)