NOTE: All specifications are subject to change without notification.
SCD's for these device s should be reviewed by SSDI prior to release. DATA SHEET #: RSED15C DOC
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638-5223
Phone: (562) 404-4474 * Fax: (562) 404-1773
ssdi@ssdi-pow er.com * www.ssdi-power.com
Designer’s Data Sheet
Part Number / Ordering In
f
ormation 1
/
SED150 _
_
_
_
_
_
│
│
│
│
│
│
│
│
└
Screening
2
/
__ = Not Screened
TX = TX Level
TXV = TXV
S = S Level
│
│
│
└
V
oltage 30 = 30 V
└
Package
LB = Sedpac k 3
LE = Sedpac k 3 with Lead
LT = S edpac k 3 with Lead and Heat sink
SED150LB30, SED150LE30,
and SED150LT30
150 A / 30 V
Schottky Rectifier
FEATURES:
• 30 Volt Schottky Rectifier
• Average Output Current 150 Amps
• Low Reverse Leakage
• Low Forward Voltage Drop
• Hermeti cal l y Se al ed Pow er Surfac e Mount
Package
• Guard Ring for Overvoltage Protection
• Eutect ic Die Atta ch
• TX, TX V, an d Sp ace L evel Scr e eni n g
Available 2/. Consult Factory.
MAXIMUM RATINGS 3/ Symbol Value Units
Peak Repetitive Reverse and DC Blocking Voltage
RRM
VRWM
VR 30 Volts
Average Rectified Forward Curren
t
(Resistive Load, 60 Hz, Sine Wave, TC = 100oC) I
O 150 Amps
Peak Surge Curren
t
(8. 3 ms pul se, half sine wave superimposed on Io,
allow Juncti on to reach equil ibri um between pulse s, T
A
= 25oC) IFSM 1000 Amps
Operating & Storage Temperature TOP & Tstg -55 to +150 oC
Maximum Thermal Resistance
(Junc tion to Case) RθJC 0.3 oC/W
SEDPACK 3 (LB) SEDPACK 3 with Lead (LE) SEDPACK 3 with Lead and Heatsink (LT)
NOTES:
1/ For Ordering Information, Price, and Availability Contact Factory.
2/ Screened to MIL-PRF-19500.
3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC.
NOTE: All specifications are subject to change without notification.
SCD's for these device s should be reviewed by SSDI prior to release. DATA SHEET #: RSED15C DOC
ELECTRICAL CHARACTERISTICS 3/ Symbol Maximum Value Units
Instantaneous Forward Voltage Drop
(TA= 25ºC, 300-500 μse c p ulse)
IF = 50 A
IF = 110 A
IF = 150 A
F1
VF2
VF3
0.46
0.55
0.65 VDC
Instantaneous Forward Voltage Drop
(300-500 μsec p ulse) TA= 125º C, IF = 150 A
VF4
0.60 VDC
Reverse Leakage Curren
t
(Rat ed V R, T
A
= 25ºC, 300 μse c p ulse mini mum) IR1 7.5 mA
Reverse Leakage Curren
t
(Rat ed V R, T
A
= 125ºC, 300 μsec pulse minimum) IR2 750 mA
Junction Capacitance
(VR = 5V , f = 1MH z, T
A
= 25oC) CJ 7000 pF
NOTES:
1/ For Ordering Information, Price, and Availability Contact Factory.
2/ Screened to MIL-PRF-19500.
3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC.
PIN ASSIGNMENT
Package TOP BOTTOM LEAD
Sedpack 3 (LB) Anode Cathode ---
Sedpack 3 with Lead (LE) Anode Cathode Anode
Sedpack 3 with Lead (LT) Anode Cathode Anode
Case Outline: SEDPACK 3
Case Outline: SEDPACK 3 with Lead
Case Outline:
SEDPACK 3 with Lead and Heatsink
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638-5223
Phone: (562) 404-4474 * Fax: (562) 404-1773
ssdi@ssdi-pow er.com * www.ssdi-power.com
SED150LB30, SED150LE30,
and SED150LT30