KEMET Organic Capacitor (KO-CAP(R)) T52X/T530 Polymer Electrolytic Capacitors Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low ESR and improved capacitance retention at high frequencies. KO-CAP combines the low ESR of multilayer ceramic, the high capacitance of aluminum electrolytic, and the volumetric efficiency of tantalum into a single surface mount package. Unlike liquid electrolyte-based capacitors, KO-CAP has a very long operational life and high ripple current capabilities. The T52X/T530 provides the widest range of voltages, capacitance and case size options in the KO-CAP family and is suitable for general purpose DC applications for up to 48 volt DC voltage rails. Benefits * ESR values down to 5 m * Stable capacitance across temperature and voltage * No aging effects * High ripple handling * Volumetrically efficient * High frequency capacitance retention * 100% accelerated steady state aging * 100% surge current tested * Halogen-free epoxy and RoHS compliant Applications Typical applications include DC/DC converters, audio/sound circuits (mobile phone and base stations, smart phones, MP3 players), power supply inputs, portable electronics (notebook PCs, displays, SSDs, HDDs and USBs, digital cameras, GPS navigation systems, WiFi modules), telecommunications, consumer electronics (analytical and test equipment, high speed servers), high voltage applications such as 12 V to 48 V power input rails, densely populated circuits with space restrictions, microprocessor decoupling, and high ripple current applications. Built Into Tomorrow (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 1 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Environmental Compliance * RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn, Ni-Pd-Au or non-magnetic 100% Sn solder *Halogen-free * Epoxy compliant with UL94 V-0 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET's K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Series Reference Selection Series Voltage Range Maximum Operating Temperature < 1 V to 9 V Applications 12 V to 48 V Applications 85C Rated 105C Rated X * X** X 125C Rated Special Features Miniature Size T520 Standard T521 High Voltage T523 Facedown Terminal X X** T525 High Temperature X * T527 Small Size X X X X T529 Miniature X X X X T530 High Cap/ Low ESR X X TF08 UltrathinFacedown X * X X X Low ESL X X X** X X X X * Not recommended for new design. ** Selected values. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 2 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Ordering Information T52X/T530 T 520 Capacitor Class Series T= Tantalum 520 = Polymer 521 = High voltage 523 = Facedown terminal 525 = 125C rated 527 = Facedown terminal 529 = Substrate terminal 530 = 125C High capacitance V 157 M Case Capacitance Code Capacitance Size1 (pF) Tolerance A B C D H I J L M P Q S T U V W X Y First two digits represent significant figures. Third digit specifies number of zeros. K = 10% M = 20% 006 A T E045 Rated Voltage (VDC) Failure Rate/ Design Termination Finish ESR Code 002 = 2 2R5 = 2.5 003 = 3 004 = 4 006 = 6.3 008 = 8 010 = 10 011 = 11 12R = 12.5 016 = 16 020 = 20 025 = 25 035 = 35 050 = 50 063 = 63 075 = 75 A= N/A T = 100% Matte tin (Sn)-plated H*** = Tin/lead (SnPb) solder coated (5% Pb minimum) P* = Ni-Pd-Au-plated N = Non-magnetic 100% Tin (Sn) M = Non-magnetic (SnPb) A** = Ni-Au E = ESR last three digits specify ESR in m (045 = 45 m) Packaging (C-Spec) Blank = 7" reel 7280**** = 13" reel Gold termination available upon request * P termination only available on select part numbers ** A termination only available on T529 part numbers *** H termination not available for T527/T529 part numbers **** 13" reel not available for T520A case and some other part numbers (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 3 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Ordering Information cont. TF08 T F 08A 226 Capacitor Class Series Case Size Capacitance Code (pF) F= Ultrathin polymer solutionFacedown construction 08A = 3216/0.8 max height T= Tantalum First two digits represent significant figures. Third digit specifies number of zeros. M 016 Capacitance Rated Voltage Tolerance (VDC) M = 20% 006 = 6.3 016 = 16 A P E200 Failure Rate/ Design Termination Finish ESR Code A = N/A P = Ni-Pd-Au-plated E = ESR Last three digits specify ESR in m (200 = 200m) Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range DF (120 Hz) ESR (100 kHz) Leakage Current -55C to 85C/105C/125C (refer to part number for maximum temperature rating) 4.7 - 1,500 F at 120 Hz/25C K tolerance (10%), M tolerance (20%) 2 - 75 V Refer to Part Number Electrical Specification Table* Refer to Part Number Electrical Specification Table** Refer to Part Number Electrical Specification Table * For T529 Series DF measurement apply 1.5 V DC ** For PN T520B477M2R5ATE014 the ESR measurement should be taken at 300 to 500kHz (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 4 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Qualification Test Condition Characteristics C/C Endurance Temperature: 85C, 105C, 125C *2 Voltage: 1.0 Rated Voltage 2/3 Rated Voltage for 125C rating PN Time: 2,000 Hours 1,000 Hours for T527/T529 *3 DF DCL ESR C/C Storage Life Temperature: 105C, 125C Voltage: 0 Voltage Time: 2,000 Hours (N/A for T527 and T529 *3) DF *2 DCL ESR C/C Humidity Temperature: 60C Voltage: No Load Humidity: 90% RH Time: 500 Hours, 1,000 Hours (T525, T530) DF DCL ESR +25C Temperature Stability Extreme temperature exposure at a succession of continuous steps at +25C, -55C, +25C, +85C, +105/125C *2, +25C Surge Voltage Temperature: 105C, 85C Voltage: 1.32 x Rated voltage*5 Time: 1,000 cycles IL*1 20% 30% +50% - 0% of DC/C (T527/29/TF08A)*3 DF IL IL 1.2 x IL 1.5 x IL*6 1.5 x IL DCL IL DF DCL ESR Mechanical Shock/Vibration MIL-STD-202, Method 213, Condition I, 100 G Peak. MIL-STD-202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within initial limits Within 1.25 x initial limit T521: 1.25 x IL at 105C, 2x IL at 125C T525/T530: Within 2.0 x initial limit Within 2.0 x initial limit Within -5%/+35% of initial value T527/T529/TF08A: -20% to +30% of initial DC/C limit T520B477M2R5ATE014: -20% to +50% of initial DC/C limit Within initial limits T527/T529/TF08A: Within 1.5 x initial limits*3 Within 5.0 x initial limit T521/T525/T529/T530: Within 3.0 x initial limit *3 T527/TF08A: Within initial limits Within 2.0 x initial limit T525/T527/T529/T530/TF08A: N/A*3 -55C +85C +105/125C 20% -20% - 0% of DC/C (T527/29/ TF08A)*3 C/C C/C *2, *4, *5 Within -20%/+10% of initial value T527, T529 and TF08A: Within -20/+20 of initial value Within initial limits T527/T529/TF08A: Within 1.5 x initial limits*3 85C and 105C rated parts: Within 1.25 x initial limit 125C rated parts: Within 2.0 x initial limits T527/TF08A: Within initial limits T529: Within 3.0 x initial limits Within 2.0 x initial limit (N/A for T527/T529/TF08A*3) Within -20%/+10% of initial value C/C N/A 10 x IL 10 x IL Within -20%/+10% of initial value T527/T529/TF08A: Within -20/+20% of initial value Within initial limits Within initial limits Within initial limits T527/T529/TF08A: N/A*3 Within 10% of initial value Within initial DC/C limits DF Within initial limits DCL Within initial limits IL = Initial limit Please refer to part number specifications for individual temperature classification. *3 This condition/exclusion applies also to PN T520B477M2R5ATE014 and PN T520B337M2R5ATE009 *4 For Series T527, T529 and TF test temperature is 85C *5 For T527 > 20 V test temperature is at +15 - +35C, test voltage at 1.16 x VR *5 For T527/TF,6 V test voltage is 1.27 x rated voltage / For TFA08226M016 test voltage is 1.15 x rated voltage *6 For part numbers rated at 85C *1 *2 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 5 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Reliability KO-CAP capacitors have an average failure rate of 0.5 %/1,000 hours at category voltage, UC, and category temperature, TC. These capacitors are qualified using industry test standards at UC and TC. The minimum test time (1,000 hours or 2,000 hours) is dependent on the product. The actual life expectancy of KO-CAP capacitors increases when application voltage, UA, and application temperature, TA, are lower than UC and TC. As a general guideline, when UA < 0.9 * UC and TA < 85C, the life expectancy will typically exceed the useful lifetime of most hardware (> 10 years). The lifetime of a KO-CAP capacitor at a specific application voltage and temperature can be modeled using the equations below. A failure is defined as passing enough current to blow a 1-amp fuse. The calculation is an estimation based on empirical results and is not a guarantee. VAF = [ ( TAF = e ( ) UC n UA Ea 1 1 k 273+TA 273+TC )] where: TAF = acceleration factor due to temperature, unitless Ea = activation energy, 1.4 eV where: VAF = acceleration factor due to voltage, unitless UC = category voltage, volt UA = application voltage, volt k = Boltzmann's constant, 8.617E-5 eV/K TA = application temperature, C n = exponent, 16 TC = category temperature, C AF = VAF * TAF LifeU ,T = LifeU ,T * AF A A C C where: where: LifeUA, TA = guaranteed life application voltage and temperature, years AF = acceleration factor, unitless LifeUC, TC = guaranteed life category voltage and temperature, years TAF = accerlation factor due to temperature, unitless VAF = acceleration factor due to voltage, unitless AF = acceleration factor, unitless Terms: Category voltage, UC : maximum recommended peak DC operating voltage for continuous operation at the category temperature, TC Rated voltage, U R : maximum recommended peak DC operating voltage for continuous operation up to the rated temperature, TR Category temperature, TC : maximum recommended operating temperature. Voltage derating may be required at TC Rated temperature, TR : maximum recommended operating temperature without voltage derating. TR is equal to or lower than TC Reliability Table 1 - Common temperature range classifications 85C (TR) / 85C (TC) 105C (TR) / 105C (TC) 105C (TR) / 125C (TC) Rated Voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category Voltage (UC) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Rated Voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category Voltage (UC) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Rated Voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category Voltage (UC) 1.7 2.7 4.2 5.4 6.7 8.4 10.7 13.4 16.8 23.5 33.5 42.2 50.3 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 6 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Electrical Characteristics T520 Standard (2 V - 10 V) ESR vs. Frequency 1000 T520B157M006ATE035_Imp T520C227M006ATE025_Imp T520V337M006ATE015_Imp T520D337M006ATE009_Imp T520B157M006ATE035_ESR T520C227M006ATE025_ESR T520V337M006ATE015_ESR T520D337M006ATE009_ESR 10 1 0.1 Capacitance (uF) 100 Impedance,ESR (Ohms) Capacitance vs. Frequency 100 10 T520B157M006ATE035 T520C227M006ATE025 T520V337M006ATE015 T520D337M006ATE009 0.01 0.001 100 1,000 10,000 100,000 1,000,000 1 10,000,000 100 1,000 Frequency (Hz) 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 T521 High Voltage (12 V - 75 V) Capacitance vs. Frequency ESR vs. Frequency 100 1 Capacitance (F) 10 Impedance, ESR (Ohms) 100 T521V476M020ATE055_Imp T521V336M025ATE060_Imp T521V156M035ATE100_Imp T521V476M020ATE055_ESR T521V336M025ATE060_ESR T521V156M035ATE100_ESR 0.1 0.01 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 ESR vs. Frequency 10 1 T521V476M020ATE055 T521V336M025ATE060 T521V156M035ATE100 100 10,000,000 1,000 10,000 100,000 1,000,000 10,000,000 Frequency (Hz) T530 High Cap/Low ESR (2 V - 10 V) Capacitance vs. Frequency 1,000 10 T530D227M006ATE006_Imp T530X477M006ATE004_Imp 1 T530D227M006ATE006_ESR T530Y337M006ATE005_ESR Capacitance (F) Impedance, ESR (Ohms) T530Y337M006ATE005_Imp T530X477M006ATE004_ESR 0.1 100 T530D227M006ATE006 10 T530Y337M006ATE005 T530X477M006ATE004 0.01 0.001 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com 1 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 T2076_T52X-530 * 1/8/2021 7 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Dimensions - Millimeters (Inches) Metric will govern T520 / T521 / T525 / T530 CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A B W B Glue pad shape/design at KEMET's option H X T S S P Termination cutout at KEMET's option, either end R L For T520 Series, bevel is at KEMET's option Case Size F Component Dimensions F S 0.3 (0.012) S1 0.4 (0.0157) S2 0.2 (0.00) Typical B 0.15 X P R T A (Ref) 0.006 (Ref) (Ref) (Ref) (Ref) (Min) 0.8 (0.032) N/A 0.10 0.10 (0.004 0.004) 0.4 (0.016) 0.4 (0.016) 0.13 (0.005) 1.2 (0.047) 53 2.2 (0.087) 0.8 (0.032) S1 = 0.8 (0.032) *2 S2 = 0.8 (0.032) *2 0.4 (0.016) 0.10 0.10 (0.004 0.004) 0.5 (0.020) 1.0 (0.039) 0.13 (0.005) 1.9 (0.075) 95 6.0 0.3 3.2 0.2 2.5 0.3 (0.236 0.012) (0.126 0.008) (0.098 0.012) 2.2 (0.087) 1.30 (0.051) 0.5 (0.020) 0.10 0.10 (0.004 0.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 2.9 (0.114) 184 734331 7.3 0.3 (0.287 0.012) 2.8 0.3 (0.110 0.012) 2.4 (0.094) 1.30 (0.051) 0.5 (0.020) 0.10 0.10 (0.004 0.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.6 (0.142) 435 H 736020 7.3 0.3 6.0 0.3 1.9 0.1 (0.287 0.012) (0.236 0.012) (0.075 0.004) 4.1 (0.161) 1.3 (0.051) N/A 0.10 0.10 (0.004 0.004) N/A N/A 0.13 (0.005) 3.3 (0.130) 385 J 736015 7.3 0.3 6.0 0.3 (0.287 0.012) (0.236 0.012) 4.1 (0.161) 1.3 (0.051) N/A 0.10 0.10 (0.004 0.004) N/A N/A N/A 3.3 (0.130) 263 L 603219 6.0 0.3 (0.236 0.012) 3.2 0.2 1.8 0.1 (0.110 0.008) (0.071 0.004) 2.2 (0.087) 1.3 (0.051) N/A 0.05 (0.002) N/A N/A 0.13 (0.005) 2.5 (0.098) 187 M 352815 3.5 0.2 (0.138 0.008) 2.8 0.2 1.4 0.1 (0.110 0.008) (0.055 0.004) 2.2 (0.087) 0.8 (0.031) N/A 0.05 (0.002) N/A N/A 0.13 (0.005) 1.1 (0.043) 98 Q 734312 7.3 0.3 (0.287 0.012) 4.3 0.3 1.1 0.1 (0.169 0.012) (0.043 0.004) 2.4 (0.094) 1.3 (0.051) N/A 0.05 (0.002) N/A N/A 0.13 (0.005) 3.8 (0.150) 170 T 352812 3.5 0.2 (0.138 0.008) 2.8 0.2 1.1 0.1 (0.110 0.008) (0.043 0.004) 2.2 (0.087) 0.8 (0.032) N/A 0.05 (0.002) N/A N/A 0.13 (0.005) 1.9 (0.075) 55 U 603215 6.0 0.3 3.2 0.2 1.4 0.1 (0.236 0.012) (0.126 0.008) (0.055 0.004) 2.2 (0.087) 1.3 (0.051) N/A 0.05 (0.002) N/A N/A 0.13 (0.005) 2.9 (0.114) 117 V 734319 7.3 0.3 (0.287 0.012) 4.3 0.3 (0.169 0.012) 2.4 (0.094) 1.3 (0.051) N/A 0.05 (0.002) N/A N/A 0.13 (0.005) 3.6 (0.142) 274 N/A 0.05 (0.002) N/A N/A 0.13 (0.005) 3.6 (0.142) 223 KEMET EIA L W A 321618 3.2 0.2 1.6 0.2 1.6 0.2 (0.126 0.008) (0.063 0.008) (0.063 0.008) 1.2 (0.047) B 352821 3.5 0.2 (0.138 0.008) 1.9 0.1*3 (0.075 0.008) C 603228 D 2.8 0.2 (0.110 0.008) 4.3 0.3 (0.169 0.012) H 0.1 (0.004) 1.5 (0.059) Maximum 1.8 0.1 (0.0710.004) *1 Weight (mg) W 734315 7.3 0.3 (0.287 0.012) 2.4(0.094) 1.30 (0.051) 4.3 0.3 1.4 0.1 2.8 0.2 S1 = 5.0 (0.197) *2 (0.169 0.012) (0.055 0.004) (0.110 0.0079) *2 S2 = 1.3 (0.051) *2 X 734343 7.3 0.3 (0.287 0.012) 4.3 0.3 (0.169 0.012) 4.0 0.3 (0.157 0.012) 2.4 (0.094) 1.3 (0.051) 0.5 (0.020) 0.10 0.10 (0.004 0.004) 1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.6 (0.142) 554 Y 734340 7.3 0.3 (0.287 0.012) 4.3 0.3 (0.169 0.012) 3.8 0.2 (0.150 0.008) 2.4 (0.094) 1.3 (0.051) 0.5 (0.020) 0.10 0.10 (0.004 0.004) 1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 494 Height tolerance is 0.2 for V case T521 only S1 and S2 is for T528 series only *3 Height tolerance is 0.2 for: T520B with M & N terminations *1 *2 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 8 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Dimensions - Millimeters cont. T523 END VIEW BOTTOM VIEW SIDE VIEW H F W L S S KEMET EIA W 7343-15 J 7360-15 V 7343-20 H 7360-20 L W H F 0.1 (0.004) S 0.3 (0.012) 7.30.3 (0.2870.012) 7.30.3 (0.2870.012) 7.30.3 (0.2870.012) 7.30.3 (0.2870.012) 4.30.3 (0.1690.012) 6.00.3 (0.2360.012) 4.30.3 (0.1690.012) 6.00.3 (0.2360.012) 1.40.1 (0.0550.004) 1.40.1 (0.0550.004) 1.90.1 (0.0750.004) 1.90.1 (0.0750.004) 2.4 (0.094) 4.45 (0.175) 2.4 (0.094) 4.45 (0.175) 1.3 (0.051) 1.6 (0.063) 1.3 (0.051) 1.6 (0.063) Typical Weight (mg) 223 263 274 385 T527/TF END VIEW BOTTOM VIEW SIDE VIEW H F L W S Case Size S Component Dimensions Typical Weight KEMET EIA L W H F S (mg) I 08A T S 3216-10 3216-08 3528-12 3216-12 3.2 0.2 3.2 0.2 3.5 0.2 3.2 0.2 1.6 0.2 1.6 0.2 2.8 0.2 1.6 0.2 0.9 0.1 0.8 Maximum 1.1 0.1 1.1 0.1 1.2 0.1 1.2 0.1 2.2 0.1 1.2 0.1 0.8 0.2 0.8 0.2 0.7 0.2 0.8 0.2 70 55 26.2 T529 END VIEW BOTTOM VIEW SIDE VIEW H F L W S S Case Size Component Dimensions Typical Weight KEMET EIA L W H F S (mg) P I 2012-10 3216-10 2.00.1 3.20.2 1.250.1 1.60.2 1.0 maximum 1.0 maximum 0.90.1 1.20.1 0.550.1 0.80.1 11.4 70 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 9 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 94 11.75 17 17 25 25 25 25 25 25 25 37.5 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 82.5 83 82.5 82.5 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 10 8* 8* 8* 8 8 10 8 8 8 8 8 8* 8* 8 8 8 8 8 8 8 8 10* 8 8 8 10 10 10 10 10 10 10 10 10 10 8* 8* 8 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 40 90 70 80 40 70 80 25 35 40 70 55 25 35 15 18 21 25 30 35 55 70 70 55 25 45 25 6 7 9 12 15 25 45 7 40 9 12 15 18 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 F KEMET/EIA (See below for part options) 470 47 68 68 100 100 100 100 100 100 100 150 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 V/7343-19 A/3216-18 A/3216-18 A/3216-18 T/3528-12 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 A/3216-18 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T/3528-12 U/6032-15 C/6032-28 C/6032-28 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T520V477M002A(1)E040 T520A476M2R5A(1)E090 ^ T520A686M2R5A(1)E070 ^ T520A686M2R5A(1)E080 ^ T520T107M2R5A(1)E040 T520T107M2R5A(1)E070 T525T107M2R5A(1)E080 T520B107M2R5A(1)E025 T520B107M2R5A(1)E035 T520B107M2R5A(1)E040 T520B107M2R5A(1)E070 T520U157M2R5A(1)E055 T520A227M2R5A(1)E025 ^ T520A227M2R5A(1)E035 ^ T520B227M2R5A(1)E015 T520B227M2R5A(1)E018 T520B227M2R5A(1)E021 T520B227M2R5A(1)E025 T520B227M2R5A(1)E030 T520B227M2R5A(1)E035 T520B227M2R5A(1)E055 T520B227M2R5A(1)E070 T520T227M2R5ATE070 ^ T520U227M2R5A(1)E055 T520C227M2R5A(1)E025 T520C227M2R5A(1)E045 T520W227M2R5A(1)E025 T520V227M2R5A(1)E006 T520V227M2R5A(1)E007 T520V227M2R5A(1)E009 T520V227M2R5A(1)E012 T520V227M2R5A(1)E015 T520V227M2R5A(1)E025 T520V227M2R5A(1)E045 T520D227M2R5A(1)E007 T520D227M2R5A(1)E040 T520B337M2R5ATE009 ^ T520B337M2R5ATE012 ^ T520B337M2R5A(1)E015 T520B337M2R5A(1)E018 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 2,200 1,100 1,300 1,200 1,600 1,200 1,100 2,300 1,900 1,800 1,300 1,600 1,732 1,500 2,900 2,700 2,500 2,300 2,100 1,900 1,500 1,300 1,200 1,600 2,600 1,900 2,700 5,600 5,200 4,600 3,900 3,500 2,700 2,000 5,700 2,400 3,073 2,700 2,900 2,700 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 125 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 10 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 188 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8* 10 10 10 10 10 10 8 8 8 10 8 10 10 8 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 35 45 70 15 18 25 45 9 12 25 15 25 40 6 7 9 12 15 18 25 40 6 7 25 14 6 7 9 12 15 18 25 45 5 6 6 7 9 10 25 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 F KEMET/EIA (See below for part options) 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 L/6032-19 L/6032-19 L/6032-19 W/7343-15 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 B/3528-21 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 T520B337M2R5A(1)E035 T520B337M2R5A(1)E045 T520B337M2R5A(1)E070 T520C337M2R5A(1)E015 T520C337M2R5A(1)E018 T520C337M2R5A(1)E025 T520C337M2R5A(1)E045 T520L337M2R5A(1)E009 T520L337M2R5A(1)E012 T520L337M2R5A(1)E025 T520W337M2R5A(1)E015 T520W337M2R5A(1)E025 T520W337M2R5A(1)E040 T520V337M2R5A(1)E006 T520V337M2R5A(1)E007 T520V337M2R5A(1)E009 T520V337M2R5A(1)E012 T520V337M2R5A(1)E015 T520V337M2R5A(1)E018 T520V337M2R5A(1)E025 T520V337M2R5A(1)E040 T520D337M2R5A(1)E006 T520D337M2R5A(1)E007 T525D337M2R5A(1)E025 T520B477M2R5ATE014 ^ T520V477M2R5A(1)E006 T520V477M2R5A(1)E007 T520V477M2R5A(1)E009 T520V477M2R5A(1)E012 T520V477M2R5A(1)E015 T520V477M2R5A(1)E018 T520C477M2R5A(1)E025 T520C477M2R5A(1)E045 T530D477M2R5A(1)E005 T520D477M2R5A(1)E006 T530D477M2R5A(1)E006 T520D477M2R5A(1)E007 T520D477M2R5A(1)E009 T530D477M2R5A(1)E010 T525D477M2R5A(1)E025 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 1,900 1,700 1,300 3,300 3,000 2,600 1,900 4,100 3,500 2,400 3,500 2,700 2,100 5,600 5,200 4,600 3,900 3,500 3,200 2,700 2,200 6,100 5,700 3,000 3,000 5,600 5,200 4,600 3,900 3,500 3,200 2,600 1,900 7,100 6,100 6,500 5,700 5,000 5,000 3,000 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 125 85 105 105 105 105 105 105 105 105 125 105 125 105 105 125 125 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 11 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 140 170 170 170 170 170 170 170 170 170 170 170 170 170 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 375 375 375 30 30 30 30 30 45 45 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 8 10 8 10 10 10 8 8 8 10 10 8 10 10 10 10 10 10 10 8 8 10 10 10 8 8 8 10 10 8 10 8 8 8 8 8 8 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 5 6 7 10 10 15 25 40 5 6 7 15 25 6 4.5 6 7 9 10 15 30 5 6 10 15 25 4 5 6 10 15 5 15 80 25 35 40 70 25 35 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 3 3 3 F KEMET/EIA (See below for part options) 560 680 680 680 680 680 680 680 680 680 680 680 680 680 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1500 1500 1500 100 100 100 100 100 150 150 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 X/7343-43 X/7343-43 X/7343-43 Y/7343-40 X/7343-43 X/7343-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T530D567M2R5A(1)E005 T530D687M2R5A(1)E006 T530D687M2R5A(1)E007 T520D687M2R5A(1)E010 T530D687M2R5A(1)E010 T520D687M2R5A(1)E015 T525D687M2R5A(1)E025 T520D687M2R5A(1)E040 T530Y687M2R5A(1)E005 T530Y687M2R5A(1)E006 T530Y687M2R5A(1)E007 T520Y687M2R5A(1)E015 T520Y687M2R5A(1)E025 T530X687M2R5A(1)E006 T520D108M2R5A(1)E4R5 T520D108M2R5A(1)E006 T520D108M2R5A(1)E007 T520D108M2R5A(1)E009 T520D108M2R5A(1)E010 T520D108M2R5A(1)E015 T520D108M2R5A(1)E030 T530Y108M2R5A(1)E005 T530Y108M2R5A(1)E006 T520Y108M2R5A(1)E010 T520Y108M2R5A(1)E015 T520Y108M2R5A(1)E025 T530X108M2R5A(1)E004 T530X108M2R5A(1)E005 T530X108M2R5A(1)E006 T520X108M2R5A(1)E010 T520Y158M2R5A(1)E015 T530X158M2R5A(1)E005 T520X158M2R5A(1)E015 T525B107M003A(1)E080 T520B107M003A(1)E025 T520B107M003A(1)E035 T520B107M003A(1)E040 T520B107M003A(1)E070 T520B157M003A(1)E025 T520B157M003A(1)E035 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 7,100 6,500 6,000 4,700 5,000 3,900 3,000 2,400 7,300 6,600 6,100 4,000 3,100 6,700 7,100 6,100 5,700 5,000 4,700 3,900 2,700 7,300 6,600 4,900 4,000 3,100 8,200 7,300 6,700 5,000 4,000 7,300 4,100 1,300 2,300 1,900 1,800 1,300 2,300 1,900 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 125 125 105 125 105 125 105 125 125 125 105 105 125 105 105 105 105 105 105 105 125 125 105 105 105 125 125 125 105 105 125 105 125 105 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 12 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 45 45 45 99 99 99 99 99 141 141 204 204 204 204 300 300 300 450 6 13.2 13.2 18.8 18.8 18.8 27 27.2 27.2 27.2 27.2 27.2 27.2 27.2 40 40 40 40 40 40 40 40 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 8 10 10 10 10 10 8 10 8 10 10 10 8 10 10 8 8 8* 8* 8* 8* 8 8* 8 8 8 8 8 8 8 8* 8* 8* 8 8 8 8 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 40 70 80 9 12 15 25 25 10 25 10 15 25 40 10 15 30 8 100 70 80 70 80 70 180 70 25 35 40 70 80 55 200 150 200 70 150 25 35 40 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 F KEMET/EIA (See below for part options) 150 150 150 330 330 330 330 330 470 470 680 680 680 680 1000 1000 1000 1500 15 33 33 47 47 47 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 B/3528-21 B/3528-21 B/3528-21 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 T/3528-12 A/3216-18 A/3216-18 A/3216-18 A/3216-18 T/3528-12 A/3216-18 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 I/3216-10 A/3216-18 A/3216-18 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 T520B157M003A(1)E040 T520B157M003A(1)E070 T525B157M003A(1)E080 T520V337M003A(1)E009 T520V337M003A(1)E012 T520V337M003A(1)E015 T520V337M003A(1)E025 T525D337M003A(1)E025 T530D477M003A(1)E010 T525D477M003A(1)E025 T530D687M003A(1)E010 T520D687M003A(1)E015 T525D687M003A(1)E025 T520D687M003A(1)E040 T530X108M003A(1)E010 T520X108M003A(1)E015 T520X108M003A(1)E030 T530X158M003A(1)E008 T520T156M004A(1)E100 T520A336M004A(1)E070 ^ T520A336M004A(1)E080 ^ T520A476M004A(1)E070 ^ T520A476M004A(1)E080 ^ T520T476M004A(1)E070 T520A686M004A(1)E180 ^ T520T686M004A(1)E070 T520B686M004A(1)E025 T520B686M004A(1)E035 T520B686M004A(1)E040 T520B686M004A(1)E070 T525B686M004A(1)E080 T520U686M004A(1)E055 T527I107M004ATE200 ^ T520A107M004A(1)E150 ^ T520A107M004A(1)E200 ^ T520T107M004A(1)E070 T520T107M004A(1)E150 T520B107M004A(1)E025 T520B107M004A(1)E035 T520B107M004A(1)E040 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 1,800 1,300 1,300 4,600 3,900 3,500 2,700 3,000 5,000 3,000 5,000 3,900 3,000 2,400 5,200 4,100 2,900 5,800 1,000 1,300 1,200 1,300 1,200 1,200 800 1,200 2,300 1,900 1,800 1,300 1,300 1,600 775 900 700 1,200 800 2,300 1,900 1,800 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 125 105 105 105 105 125 125 125 125 105 125 105 125 105 105 125 105 105 105 105 105 105 105 105 105 105 105 105 125 105 105 105 105 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 13 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 40 40 40 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 176 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10* 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 70 80 55 15 18 25 30 35 40 70 55 15 25 45 100 7 9 12 15 25 7 35 35 45 70 15 18 25 45 55 12 25 25 40 6 7 9 12 15 18 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 F KEMET/EIA (See below for part options) 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 B/3528-21 B/3528-21 U/6032-15 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 C/6032-28 C/6032-28 C/6032-28 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 T/3528-12 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 L/6032-19 L/6032-19 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 T520B107M004A(1)E070 T525B107M004A(1)E080 T520U107M004A(1)E055 T520B157M004A(1)E015 T520B157M004A(1)E018 T520B157M004A(1)E025 T520B157M004A(1)E030 T520B157M004A(1)E035 T520B157M004A(1)E040 T520B157M004A(1)E070 T520U157M004A(1)E055 T520C157M004A(1)E015 T520C157M004A(1)E025 T520C157M004A(1)E045 T520C157M004A(1)E100 T520V157M004A(1)E007 T520V157M004A(1)E009 T520V157M004A(1)E012 T520V157M004A(1)E015 T520V157M004A(1)E025 T520D157M004A(1)E007 T520T227M004ATE035 ^ T520B227M004A(1)E035 T520B227M004A(1)E045 T520B227M004A(1)E070 T520C227M004A(1)E015 T520C227M004A(1)E018 T520C227M004A(1)E025 T520C227M004A(1)E045 T520C227M004A(1)E055 T520L227M004A(1)E012 T520L227M004A(1)E025 T520W227M004A(1)E025 T520W227M004A(1)E040 T520V227M004A(1)E006 T520V227M004A(1)E007 T520V227M004A(1)E009 T520V227M004A(1)E012 T520V227M004A(1)E015 T520V227M004A(1)E018 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 1,300 1,300 1,600 2,900 2,700 2,300 2,100 1,900 1,800 1,300 1,600 3,300 2,600 1,900 1,300 5,200 4,600 3,900 3,500 2,700 5,700 1,463 1,900 1,700 1,300 3,300 3,000 2,600 1,900 1,700 3,500 2,400 2,700 2,100 5,600 5,200 4,600 3,900 3,500 3,200 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 125 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 14 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 88 88 88 88 88 88 88 88 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 188 188 188 188 188 188 188 188 188 188 188 188 272 272 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 10 10 10 10 10 10 10 10 8 8 10 10 10 10 10 10 8 10 8 10 10 10 10 10 10 10 8 10 8 10 10 10 10 10 10 10 8 8 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 25 40 45 6 7 12 25 65 25 45 7 9 12 18 25 40 5 6 6 7 9 12 15 25 40 45 6 10 10 12 15 18 25 25 40 40 5 6 12 15 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 F KEMET/EIA (See below for part options) 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 470 470 470 680 680 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 C/6032-28 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 D/7343-31 D/7343-31 T520V227M004A(1)E025 T520V227M004A(1)E040 T520V227M004A(1)E045 T520D227M004A(1)E006 T520D227M004A(1)E007 T520D227M004A(1)E012 T525D227M004A(1)E025 T520D227M004A(1)E065 T520C337M004A(1)E025 T520C337M004A(1)E045 T520V337M004A(1)E007 T520V337M004A(1)E009 T520V337M004A(1)E012 T520V337M004A(1)E018 T520V337M004A(1)E025 T520V337M004A(1)E040 T530D337M004A(1)E005 T520D337M004A(1)E006 T530D337M004A(1)E006 T520D337M004A(1)E007 T520D337M004A(1)E009 T520D337M004A(1)E012 T520D337M004A(1)E015 T525D337M004A(1)E025 T520D337M004A(1)E040 T520D337M004A(1)E045 T530D477M004A(1)E006 T520D477M004A(1)E010 T530D477M004A(1)E010 T520D477M004A(1)E012 T520D477M004A(1)E015 T520D477M004A(1)E018 T520D477M004A(1)E025 T525D477M004A(1)E025 T520D477M004A(1)E040 T525D477M004A(1)E040 T530Y477M004A(1)E005 T530Y477M004A(1)E006 T520D687M004A(1)E012 T520D687M004A(1)E015 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 2,700 2,200 2,000 6,100 5,700 4,300 3,000 1,900 2,600 1,900 5,200 4,600 3,900 3,200 2,700 2,200 7,100 6,100 6,500 5,700 5,000 4,300 3,900 3,000 2,400 2,200 6,500 4,700 5,000 4,300 3,900 3,500 3,000 3,000 2,400 2,400 7,300 6,600 4,300 3,900 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 125 105 105 105 105 105 105 105 105 105 125 105 125 105 105 105 105 125 105 105 125 105 125 105 105 105 105 125 105 125 125 125 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 15 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 272 272 272 272 272 272 272 272 272 272 272 272 400 9.45 18.9 22 22 13.86 13.86 13.86 20.79 20.79 20.79 20.79 20.79 20.79 20.79 20.79 20.79 20.79 29.61 29.6 29.6 29.6 29.61 29.61 29.61 29.61 29.61 29.61 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 10 8 10 10 10 8 8 8 10 8 10 10 8 8 6* 6* 6* 8* 8* 8 8* 8* 8 8 8 8 8 8 8 8 6* 6* 10 * 6* 8* 8 8 8 8 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 25 5 10 15 25 4 5 6 10 10 15 35 6 100 200 150 200 90 100 100 70 80 120 70 25 35 40 70 80 100 200 150 150 200 150 40 70 80 25 35 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 4 4 4 4 4 4 4 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 F KEMET/EIA (See below for part options) 680 680 680 680 680 680 680 680 680 680 680 680 1000 15 10 22 22 22 22 22 33 33 33 33 33 33 33 33 33 33 47 47 47 47 47 47 47 47 47 47 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 T/3528-12 P/2012-10 P/2012-10 P/2012-10 A/3216-18 A/3216-18 T/3528-12 A/3216-18 A/3216-18 A/3216-18 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 P/2012-10 P/2012-10 3216-08 I/3216-10 A/3216-18 T/3528-12 T/3528-12 T/3528-12 B/3528-21 B/3528-21 T520D687M004A(1)E025 T530Y687M004A(1)E005 T520Y687M004A(1)E010 T520Y687M004A(1)E015 T520Y687M004A(1)E025 T530X687M004A(1)E004 T530X687M004A(1)E005 T530X687M004A(1)E006 T520X687M004A(1)E010 T530X687M004A(1)E010 T520X687M004A(1)E015 T520X687M004A(1)E035 T530X108M004A(1)E006 T520T156M006A(1)E100 T529P106M006AAE200 ^ T529P226M006AAE150 ^ T529P226M006AAE200 ^ T520A226M006A(1)E090 ^ T520A226M006A(1)E100 ^ T520T226M006A(1)E100 T520A336M006A(1)E070 ^ T520A336M006A(1)E080 ^ T520A336M006A(1)E120 ^ T520T336M006A(1)E070 T520B336M006A(1)E025 T520B336M006A(1)E035 T520B336M006A(1)E040 T520B336M006A(1)E070 T525B336M006A(1)E080 T520C336M006A(1)E100 T529P476M006AAE200 ^ T529P476M006AAE150 ^ TF08A476M006APE150 ^ T527I476M006ATE200 ^ T520A476M006A(1)E150 ^ T520T476M006A(1)E040 T520T476M006A(1)E070 T525T476M006A(1)E080 T520B476M006A(1)E025 T520B476M006A(1)E035 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 3,000 7,300 4,900 4,000 3,100 8,200 7,300 6,700 5,000 5,200 4,100 2,700 6,700 1,000 354 408 354 1,100 1,100 1,000 1,300 1,200 1,000 1,200 2,300 1,900 1,800 1,300 1,300 1,300 354 408 632 548 900 1,600 1,200 1,100 2,300 1,900 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 125 105 105 105 125 125 125 105 125 105 105 125 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 125 105 105 105 105 105 105 105 105 125 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 16 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 29.61 29.61 29.61 29.61 42.84 42.84 42.84 42.84 42.84 42.84 42.84 42.84 42.84 42.84 42.84 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 75.6 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 8 8 8* 8 8 8 8 8 8 8 8 8 8 8* 8* 8* 8* 8* 8* 8* 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 8 8 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 40 70 70 80 150 70 150 25 35 40 70 80 55 70 100 200 100 70 70 45 35 25 70 55 15 18 25 35 40 45 70 55 40 9 12 15 45 25 45 35 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 F KEMET/EIA (See below for part options) 47 47 47 47 68 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 120 B/3528-21 B/3528-21 B/3528-21 B/3528-21 A/3216-18 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 U/6032-15 C/6032-28 I/3216-10 I/3216-10 I/3216-10 A/3216-18 A/3216-18 A/3216-18 A/3216-18 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 C/6032-28 C/6032-28 B/3528-21 T520B476M006A(1)E040 T520B476M006A(1)E070 T525B476M006A(1)E070 T525B476M006A(1)E080 T520A686M006A(1)E150 ^ T520T686M006A(1)E070 T520T686M006A(1)E150 T520B686M006A(1)E025 T520B686M006A(1)E035 T520B686M006A(1)E040 T520B686M006A(1)E070 T525B686M006A(1)E080 T520U686M006A(1)E055 T520U686M006A(1)E070 T520C686M006A(1)E100 T527I107M006ATE200 ^ T527I107M006ATE100 ^ T527I107M006ATE070 ^ T520A107M006ATE070 ^ T520A107M006ATE045 ^ T520A107M006ATE035 ^ T520A107M006ATE025 ^ T520T107M006APE070 T520T107M006APE055 T520B107M006A(1)E015 T520B107M006A(1)E018 T520B107M006A(1)E025 T520B107M006A(1)E035 T520B107M006A(1)E040 T520B107M006A(1)E045 T520B107M006A(1)E070 T520U107M006A(1)E055 T520W107M006A(1)E040 T520V107M006A(1)E009 T520V107M006A(1)E012 T520V107M006A(1)E015 T520V107M006A(1)E045 T520C107M006A(1)E025 T520C107M006A(1)E045 T520B127M006A(1)E035 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 1,800 1,300 1,300 1,300 900 1,200 800 2,300 1,900 1,800 1,300 1,300 1,600 1,400 1,300 775 775 1,134 1,035 1,600 1,500 1,732 1,200 1,200 2,900 2,700 2,300 1,900 1,800 1,700 1,300 1,600 2,100 4,600 3,900 3,500 2,000 2,600 1,900 1,900 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 125 125 105 105 105 105 105 105 105 125 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 17 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 138.6 138.6 138.6 138.6 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 8 8 9 8 8 8 8 8 8* 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 35 70 150 200 18 25 35 45 70 30 35 15 25 45 55 45 55 12 25 25 40 6 7 9 12 15 18 25 40 45 6 7 15 25 25 55 25 35 45 70 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 F KEMET/EIA (See below for part options) 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 M/3528-15 M/3528-15 M/3528-15 M/3528-15 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T/3528-12 T/3528-12 C/6032-28 C/6032-28 C/6032-28 C/6032-28 U/6032-15 U/6032-15 L/6032-19 L/6032-19 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T520M157M006A(1)E035 T520M157M006A(1)E070 T520M157M006A(1)E150 T520M157M006A(1)E200 T520B157M006A(1)E018 T520B157M006A(1)E025 T520B157M006A(1)E035 T520B157M006A(1)E045 T520B157M006A(1)E070 T523T157M006APE030 T520T157M006ATE035 ^ T520C157M006A(1)E015 T520C157M006A(1)E025 T520C157M006A(1)E045 T520C157M006A(1)E055 T520U157M006A(1)E045 T520U157M006A(1)E055 T520L157M006A(1)E012 T520L157M006A(1)E025 T520W157M006A(1)E025 T520W157M006A(1)E040 T520V157M006A(1)E006 T520V157M006A(1)E007 T520V157M006A(1)E009 T520V157M006A(1)E012 T520V157M006A(1)E015 T520V157M006A(1)E018 T520V157M006A(1)E025 T520V157M006A(1)E040 T520V157M006A(1)E045 T520D157M006A(1)E006 T520D157M006A(1)E007 T520D157M006A(1)E015 T520D157M006A(1)E025 T525D157M006A(1)E025 T520D157M006A(1)E055 T520B227M006A(1)E025 T520B227M006A(1)E035 T520B227M006A(1)E045 T520B227M006A(1)E070 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 1,900 1,300 900 800 2,700 2,300 1,900 1,700 1,300 1,870 1,700 3,300 2,600 1,900 1,700 1,700 1,600 3,500 2,400 2,700 2,100 5,600 5,200 4,600 3,900 3,500 3,200 2,700 2,200 2,000 6,100 5,700 3,900 3,000 3,000 2,000 2,300 1,900 1,700 1,300 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 125 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 18 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 207.9 208 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 8 8 10 10 10 10 10 10 10 8 10 8 10 10 10 10 10 10 10 10 8 8 10 10 10 10 10 8 10 10 8 10 10 10 10 10 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 15 18 25 45 7 9 12 15 18 25 40 5 6 6 7 9 15 18 25 25 40 50 40 70 15 18 25 40 45 6 9 10 10 15 18 25 25 40 40 45 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 F KEMET/EIA (See below for part options) 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 C/6032-28 C/6032-28 C/6032-28 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 T520C227M006A(1)E015 T520C227M006A(1)E018 T520C227M006A(1)E025 T520C227M006A(1)E045 T520V227M006A(1)E007 T520V227M006A(1)E009 T520V227M006A(1)E012 T520V227M006A(1)E015 T520V227M006A(1)E018 T520V227M006A(1)E025 T520V227M006A(1)E040 T530D227M006A(1)E005 T520D227M006A(1)E006 T530D227M006A(1)E006 T520D227M006A(1)E007 T520D227M006A(1)E009 T520D227M006A(1)E015 T520D227M006A(1)E018 T520D227M006A(1)E025 T525D227M006A(1)E025 T520D227M006A(1)E040 T520D227M006A(1)E050 T520B337M006A(1)E040 T520B337M006A(1)E070 T520V337M006A(1)E015 T520V337M006A(1)E018 T520V337M006A(1)E025 T520V337M006A(1)E040 T520V337M006A(1)E045 T530D337M006A(1)E006 T520D337M006A(1)E009 T520D337M006A(1)E010 T530D337M006A(1)E010 T520D337M006A(1)E015 T520D337M006A(1)E018 T520D337M006A(1)E025 T525D337M006A(1)E025 T520D337M006A(1)E040 T525D337M006A(1)E040 T520D337M006A(1)E045 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 3,300 3,000 2,600 1,900 5,200 4,600 3,900 3,500 3,200 2,700 2,200 7,100 6,100 6,500 5,700 5,000 3,900 3,500 3,000 3,000 2,400 2,100 1,800 1,300 3,500 3,200 2,700 2,200 2,000 6,500 5,000 4,700 5,000 3,900 3,500 3,000 3,000 2,400 2,400 2,200 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 125 105 125 105 105 105 105 105 125 105 105 85 85 105 105 105 105 105 125 105 105 125 105 105 105 125 105 125 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 19 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 207.9 207.9 207.9 207.9 207.9 207.9 207.9 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 428.4 428.4 428.4 428.4 428.4 428.0 428.0 630.0 756.0 945.0 17.6 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 10 8 10 10 10 10 9 10 10 8 10 10 10 10 10 10 10 10 10 8 8 8 10 8 10 10 10 10 10 8 8 10 10 10 20 20 20 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 5 6 10 10 15 25 40 55 35 55 35 5 10 15 18 25 35 35 15 25 30 4 5 6 10 10 18 35 40 18 25 10 18 25 18 70 55 70 55 70 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 8 F KEMET/EIA (See below for part options) 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 680 680 680 680 680 680 680 1000 1200 1500 22 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 W/7343-15 W/7343-15 V/7343-19 V/7343-19 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 Y/7343-40 Y/7343-40 X/7343-43 X/7343-43 X/7343-43 X/7343-43 J/7360-15 H/7360-20 H/7360-20 H/7360-20 T/3528-12 T530Y337M006A(1)E005 T530Y337M006A(1)E006 T520Y337M006A(1)E010 T530Y337M006A(1)E010 T520Y337M006A(1)E015 T520Y337M006A(1)E025 T520Y337M006A(1)E040 T520W477M006A(1)E055 T520W477M006A(1)E035 T520V477M006A(1)E055 T520V477M006A(1)E035 T530Y477M006A(1)E005 T520Y477M006A(1)E010 T520Y477M006A(1)E015 T520Y477M006A(1)E018 T520Y477M006A(1)E025 T520Y477M006A(1)E035 T525Y477M006A(1)E035 T520D477M006A(1)E015 T520D477(2)006A(1)E025 T520D477M006A(1)E030 T530X477M006A(1)E004 T530X477M006A(1)E005 T530X477M006A(1)E006 T520X477M006A(1)E010 T530X477M006A(1)E010 T520X477M006A(1)E018 T520X477M006A(1)E035 T520X477M006A(1)E040 T520Y687M006A(1)E018 T520Y687M006A(1)E025 T530X687M006A(1)E010 T530X687M006A(1)E018 T520X687M006A(1)E025 T520X687M006A(1)E018 T523J687M006APE070 T520H108M006A(1)E055 T520H128M006A(1)E070 T520H158M006A(1)E055 T520T226M008A(1)E070 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 7,300 6,600 4,900 5,100 4,000 3,100 2,500 1,800 2,300 1,800 2,300 7,300 4,900 4,000 3,700 3,100 2,600 2,600 3,900 3,000 2,700 8,200 7,300 6,700 5,000 5,200 3,700 2,700 2,500 3,700 3,100 5,200 3,900 3,100 3,700 2,510 1,800 1,200 1,800 1,200 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 125 105 125 105 105 105 85 85 105 105 125 105 105 105 105 105 125 105 105 105 125 125 125 105 125 105 105 105 105 105 125 125 105 105 85 85 85 85 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 20 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 26.4 26.4 26.4 26.4 26.4 26.4 26.4 26.4 37.6 37.6 65.6 65.6 120 120 120 120 30 10 10 15 66 66 22 22 22 33 33 33 33 33 33 33 33 33 33 33 47 47 47 47 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 6* 8* 8 8* 6* 6* 8* 8* 8 6* 8 8 8 8 8 8 8 8 8 8 6* 8* 8 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 70 80 80 25 35 40 70 70 35 70 25 45 25 40 55 40 200 80 80 80 150 200 200 80 80 200 40 70 80 80 25 35 40 70 80 70 200 45 35 70 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 F KEMET/EIA (See below for part options) 33 33 33 33 33 33 33 33 47 47 82 82 150 150 150 150 10 10 10 15 22 22 22 22 22 33 33 33 33 33 33 33 33 33 33 33 47 47 47 47 T/3528-12 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 B/3528-21 B/3528-21 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 V/7343-19 P/2012-10 A/3216-18 A/3216-18 A/3216-18 P/2012-10 P/2012-10 I/3216-10 A/3216-18 B/3528-21 I/3216-10 T/3528-12 T/3528-12 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 I/3216-10 A/3216-18 B/3528-21 B/3528-21 T520T336M008A(1)E070 T520T336M008A(1)E080 T525T336M008A(1)E080 T520B336M008A(1)E025 T520B336M008A(1)E035 T520B336M008A(1)E040 T520B336M008A(1)E070 T520U336M008A(1)E070 T520B476M008A(1)E035 T520B476M008A(1)E070 T520C826M008A(1)E025 T520C826M008A(1)E045 T520D157M008A(1)E025 T520D157M008A(1)E040 T520D157M008A(1)E055 T520V157M008A(1)E040 T529P106M010AAE200 ^ T520A106M010A(1)E080 ^ T525A106M010A(1)E080 ^ T520A156M010A(1)E080 ^ T529P226M010AAE150 ^ T529P226M010AAE200 ^ T527I226M010ATE200 ^ T520A226M010A(1)E080 ^ T525B226M010A(1)E080 T527I336M010ATE200 ^ T520T336M010A(1)E040 T520T336M010A(1)E070 T520T336M010A(1)E080 T525T336M010A(1)E080 T520B336M010A(1)E025 T520B336M010A(1)E035 T520B336M010A(1)E040 T520B336M010A(1)E070 T525B336M010A(1)E080 T520U336M010A(1)E070 T527I476M010ATE200 ^ T520A476M010ATE045 ^ T520B476M010A(1)E035 T520B476M010A(1)E070 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 1,200 1,100 1,100 2,300 1,900 1,800 1,300 1,400 1,900 1,300 2,600 1,900 3,000 2,400 2,000 2,200 354 1,200 1,200 1,200 408 354 548 1,200 1,300 548 1,600 1,200 1,100 1,100 2,300 1,900 1,800 1,300 1,300 1,400 548 1,291 1,900 1,300 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 125 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 125 105 105 105 105 105 125 105 105 105 105 125 105 105 105 105 125 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 21 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 47 47 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 150 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 8 10 10 8 10 10 10 10 10 10 8* 8 8 8 10 10 10 10 10 10 10 10 10 10 10 8 10 10 10 8 8 8 10 10 10 10 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 55 100 55 25 40 45 25 40 45 60 100 100 70 25 45 25 40 18 25 45 50 55 18 25 55 55 80 55 18 25 40 5 6 10 15 18 25 25 40 55 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 F KEMET/EIA (See below for part options) 47 47 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 150 U/6032-15 C/6032-28 U/6032-15 W/7343-15 W/7343-15 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 B/3528-21 C/6032-28 C/6032-28 L/6032-19 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 C/6032-28 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 T520U476M010A(1)E055 T520C476M010A(1)E100 T520U686M010A(1)E055 T520W686M010A(1)E025 T520W686M010A(1)E040 T520C686M010A(1)E045 T520V686M010A(1)E025 T520V686M010A(1)E040 T520V686M010A(1)E045 T520V686M010A(1)E060 T520V686M010A(1)E100 T520D686M010A(1)E100 T520B107M010ATE070 ^ T520C107M010A(1)E025 T520C107M010A(1)E045 T520L107M010A(1)E025 T520W107M010A(1)E040 T520V107M010A(1)E018 T520V107M010A(1)E025 T520V107M010A(1)E045 T520V107M010A(1)E050 T520V107M010A(1)E055 T520D107M010A(1)E018 T525D107M010A(1)E025 T520D107M010A(1)E055 T525D107M010A(1)E055 T520D107M010A(1)E080 T520C157M010A(1)E055 T520V157M010A(1)E018 T520V157M010A(1)E025 T520V157M010A(1)E040 T530D157M010A(1)E005 T530D157M010A(1)E006 T530D157M010A(1)E010 T520D157M010A(1)E015 T520D157M010A(1)E018 T520D157M010A(1)E025 T525D157M010A(1)E025 T520D157M010A(1)E040 T520D157M010A(1)E055 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 1,600 1,300 1,600 2,700 2,100 1,900 2,700 2,200 2,000 1,800 1,400 1,500 1,300 2,600 1,900 2,400 2,100 3,200 2,700 2,000 1,900 1,800 3,500 3,000 2,000 2,000 1,700 1,700 3,200 2,700 2,200 7,100 6,500 5,000 3,900 3,500 3,000 3,000 2,400 2,000 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 125 105 125 105 105 105 105 105 125 125 125 105 105 105 125 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 22 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 330 470 820 330 52 12.5 18.75 58.8 80 16 16 24 70.4 35.2 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 10 10 10 10 10 10 10 8 8 10 10 10 10 8 10 10 10 10 10 8 8 8 10 8 10 10 10 10 20 10 10 8 8 8 6* 8 8 8 10* 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 55 15 18 25 40 45 25 6 10 18 25 25 40 6 40 15 25 35 35 4 5 6 10 10 25 35 70 70 70 40 40 150 80 90 150 100 100 90 200 90 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 11 12.5 12.5 12.5 16 16 16 16 16 16 F KEMET/EIA (See below for part options) 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 330 470 820 330 47 10 15 47 10 10 10 15 22 22 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 J/7360-15 J/7360-15 H/7360-20 X/7343-43 Q/7343-12 T/3528-12 T/3528-12 T/3528-12 P/2012-10 B/3528-21 B/3528-21 B/3528-21 3216-08 B/3528-21 T525D157M010A(1)E055 T520Y157M010A(1)E015 T520Y157M010A(1)E018 T520Y157M010A(1)E025 T520V227M010A(1)E040 T520V227M010A(1)E045 T520V227M010A(1)E025 T530D227M010A(1)E006 T530D227M010A(1)E010 T520D227M010A(1)E018 T520D227M010A(1)E025 T525D227M010A(1)E025 T520D227M010A(1)E040 T530Y227M010A(1)E006 T520Y227M010A(1)E040 T520Y337M010A(1)E015 T520Y337M010A(1)E025 T520Y337M010A(1)E035 T525Y337M010A(1)E035 T530X337M010A(1)E004 T530X337M010A(1)E005 T530X337M010A(1)E006 T520X337M010A(1)E010 T530X337M010A(1)E010 T520X337M010A(1)E025 T520X337M010A(1)E035 T523J337M010APE070 T523J477M010APE070 T520H827M010A(1)E070 T520X337M010A(1)E040 T520Q476M011A(1)E040 T520T106M12RA(1)E150 T520T156M12RA(1)E080 T521T476M12RA(1)E090 T529P106M016AAE150 ^ T520B106M016A(1)E100 T521B106M016A(1)E100 T521B156M016A(1)E090 TF08A226M016APE200 ^ T521B226M016A(1)E090 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 2,000 4,000 3,700 3,100 2,200 2,000 2,700 6,500 5,000 3,500 3,000 3,000 2,400 6,600 2,500 4,000 3,100 2,600 2,600 8,200 7,300 6,700 5,000 5,200 3,100 2,700 2,510 2,510 1,200 2,500 4,500 800 1,100 1,100 408 1,100 1,100 1,200 548 1,200 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 105 105 105 105 105 105 125 125 105 105 125 105 125 105 105 105 105 125 125 125 125 105 125 105 105 85 85 85 105 105 105 105 105 105 105 125 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 23 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 35.2 52.8 52.8 52.8 52.8 52.8 52.8 52.8 52.8 52.8 52.8 52.8 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 108.8 108.8 108.8 108.8 108.8 108.8 108.8 160 160 160 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 10 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 80 45 50 70 90 70 90 40 45 45 60 70 40 45 45 40 45 55 70 70 80 35 35 40 45 55 65 70 70 90 50 70 100 40 50 90 50 50 70 100 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 F KEMET/EIA (See below for part options) 22 33 33 33 33 33 33 33 33 33 33 33 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 68 68 68 68 68 68 68 100 100 100 C/6032-28 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 Q/7343-12 W/7343-15 V/7343-19 V/7343-19 V/7343-19 W/7343-15 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 W/7343-15 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 D/7343-31 W/7343-15 W/7343-15 W/7343-15 T520C226M016A(1)E080 T521T336M016A(1)E045 T521T336M016A(1)E050 T521B336M016A(1)E070 T521B336M016A(1)E090 T525B336M016A(1)E070 T525B336M016A(1)E090 T521Q336M016A(1)E040 T520W336M016A(1)E045 T520V336M016A(1)E045 T520V336M016A(1)E060 T520V336M016A(1)E070 T521W476M016A(1)E040 T520W476M016A(1)E045 T521W476M016A(1)E045 T521V476M016A(1)E040 T520V476M016A(1)E045 T521V476M016A(1)E055 T520V476M016A(1)E070 T521V476M016A(1)E070 T521V476M016A(1)E080 T520D476M016A(1)E035 T525D476M016A(1)E035 T521D476M016A(1)E040 T521D476M016A(1)E045 T521D476M016A(1)E055 T525D476M016A(1)E065 T520D476M016A(1)E070 T521D476M016A(1)E070 T521D476M016A(1)E090 T523W686M016APE050 T523W686M016APE070 T523W686M016APE100 T521V686M016A(1)E040 T521V686M016A(1)E050 T521V686M016A(1)E090 T520D686M016A(1)E050 T523W107M016APE050 T523W107M016APE070 T523W107M016APE100 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 1,400 1,500 1,400 1,300 1,200 1,300 1,200 2,500 2,000 2,000 1,800 1,600 2,100 2,000 2,000 2,200 2,000 1,800 1,600 1,600 1,500 2,500 2,500 2,400 2,200 2,000 1,900 1,800 1,800 1,600 2,820 2,376 1,988 2,200 1,900 1,400 2,100 2,820 2,376 1,988 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 125 125 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 125 105 105 105 125 105 105 105 105 105 105 105 105 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 24 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 160 160 160 240 240 240 240 240 240 240 240 240 240 352 352 352 352 528 528 528 528 20 30 44 44 44 44 44 44 44 44 132 94 94 94 94 94 94 94 136 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 10 10 10 10 10 10 10 10 8 8 10 8 10 10 10 10 10 10 10 10 10 8 10 8 10 10 10 10 10 10 10 10* 9 9 10 10 10 10 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 40 50 50 50 70 100 50 40 15 25 40 40 80 35 50 70 70 15 25 50 70 100 90 90 40 55 70 40 45 90 90 90 40 45 90 80 55 55 40 50 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 F KEMET/EIA (See below for part options) 100 100 100 150 150 150 150 150 150 150 150 150 150 220 220 220 220 330 330 330 330 10 15 22 22 22 22 22 22 22 22 33 47 47 47 47 47 47 47 68 V/7343-19 V/7343-19 D/7343-31 W/7343-15 W/7343-15 W/7343-15 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 H/7360-20 J/7360-15 X/7343-43 X/7343-43 X/7343-43 H/7360-20 B/3528-21 B/3528-21 B/3528-21 W/7343-15 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 B/3528-21 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 V/7343-19 T521V107M016A(1)E040 T521V107M016A(1)E050 T521D107M016A(1)E050 T523W157M016APE050 T523W157M016APE070 T523W157M016APE100 T521D157M016A(1)E050 T521D157M016A(1)E040 T530X157M016A(1)E015 T530X157M016A(1)E025 T520X157M016A(1)E040 T530X157M016A(1)E040 T521X157M016A(1)E080 T521X227M016A(1)E035 T521X227M016A(1)E050 T523H227M016APE070 T523J227M016APE070 T521X337M016A(1)E015 T521X337M016A(1)E025 T521X337M016A(1)E050 T523H337M016APE070 T521B106M020A(1)E100 T521B156M020A(1)E090 T521B226M020A(1)E090 T521W226(2)020A(1)E040 T521W226(2)020A(1)E055 T521W226(2)020A(1)E070 T520V226M020A(1)E040 T520V226M020A(1)E045 T520V226M020A(1)E090 T521V226M020A(1)E090 T521B336M020ATE090 ^ T521W476M020A(1)E040 T521W476K020A(1)E045 T521V476M020A(1)E090 T521V476M020A(1)E080 T521V476M020A(1)E055 T521D476M020A(1)E055 T521D476M020A(1)E040 T521V686M020A(1)E050 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 2,200 1,900 2,100 2,820 2,376 1,988 2,100 2,400 4,200 3,300 2,500 2,600 1,800 2,700 2,200 2,510 2,510 4,100 3,100 2,200 2,510 1,100 1,200 1,200 2,100 1,800 1,400 2,200 2,000 1,400 1,400 972 2,100 2,000 1,400 1,500 1,800 2,000 2,400 1,900 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 125 105 105 105 105 105 105 125 125 105 125 105 125 125 85 85 125 125 125 85 125 105 105 105 105 105 105 105 105 125 105 105 105 125 125 125 125 125 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 25 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 136 200 200 300 300 35.3 34 50 50 25 25 25 37.5 112.5 37.5 37.5 37.5 37.5 37.5 55 55 55 55 55 55 55 82.5 82.5 82.5 82.5 82.5 82.5 117.5 117.5 170 250 250 250 250 250 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 10 10 10 10 10 10* 8* 10* 10* 8 8 8 8 10* 10 10 10 10 10 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 100 55 55 65 50 300 100 150 100 100 100 60 100 100 90 90 40 60 80 100 40 70 40 45 60 90 100 25 60 40 40 60 100 65 70 40 50 60 30 60 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 F KEMET/EIA (See below for part options) 68 100 100 150 150 4.7 6.8 10 10 10 10 10 15 15 15 15 15 15 15 22 22 22 22 22 22 22 33 33 33 33 33 33 47 47 68 100 100 100 100 100 V/7343-20 V/7343-19 D/7343-31 D/7343-31 D/7343-31 P/2012-10 T/3528-12 S/3216-12 M/3528-15 B/3528-21 T/3528-12 T/3528-12 B/3528-21 T/3528-12 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 B/3528-21 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 W/7343-15 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 T523V686M020APE100 T521V107M020A(1)E055 T521D107(2)020A(1)E055 T521D157M020A(1)E065 T521D157M020A(1)E050 T529P475M025AAE300 ^ T521T685M025ATE100 ^ T527S106M025ATE150 ^ T521M106M025ATE100 ^ T521B106M025A(1)E100 T521T106M025A(1)E100 T521T106M025A(1)E060 T521B156M025A(1)E100 T527T156M025ATE100 ^ T520V156M025A(1)E090 T521V156M025A(1)E090 T521V156M025A(1)E040 T520D156M025A(1)E060 T520D156M025A(1)E080 T521B226M025A(1)E100 T521W226M025A(1)E040 T521W226M025A(1)E070 T521V226M025A(1)E040 T521V226M025A(1)E045 T521V226M025A(1)E060 T521V226M025A(1)E090 T523W336M025APE100 T521V336M025A(1)E025 T521V336M025A(1)E060 T521V336M025A(1)E040 T521D336M025A(1)E040 T521D336M025A(1)E060 T523V476M025APE100 T521D476M025A(1)E065 T521D686M025A(1)E070 T521D107M025A(1)E040 T521D107M025A(1)E050 T521D107M025A(1)E060 T521X107M025A(1)E030 T521X107M025A(1)E060 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 1,400 1,800 2,000 1,900 2,100 289 866 632 922 1,100 1,000 1,300 1,100 866 1,400 1,400 2,200 1,900 1,700 1,100 2,100 1,400 2,200 2,000 1,800 1,400 1,988 2,700 1,800 2,200 2,400 1,900 1,400 1,900 1,800 2,400 2,100 1,900 2,900 2,000 Reflow Temp 260C C 4 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 3 3 3 3 3 4 3 3 3 3 3 3 3 105 125 105 105 105 105 105 105 105 125 125 125 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 125 125 125 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 26 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 11.6 11.6 16.5 16.5 23.8 23.8 23.8 35 35 35 52.5 52.5 77 77 77 115.5 115.5 164.5 164.5 164.5 164.5 164.5 3.4 5 7.5 11 16.5 28 28 28 28 34 34 34 34 50 50 50 90 90 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 8 8 10 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 150 200 150 200 90 150 200 150 200 120 100 125 100 40 60 100 65 100 30 70 90 100 200 200 200 200 200 70 90 70 90 70 90 70 90 90 120 90 90 70 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 F KEMET/EIA (See below for part options) 3.3 3.3 4.7 4.7 6.8 6.8 6.8 10 10 10 15 15 22 22 22 33 33 47 47 47 47 47 0.68 1 1.5 2.2 3.3 5.6 5.6 5.6 5.6 6.8 6.8 6.8 6.8 10 10 10 18 18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 V/7343-19 V/7343-19 V/7343-19 W/7343-15 D/7343-31 D/7343-31 V/7343-20 D/7343-31 V/7343-20 X/7343-43 X/7343-43 W/7343-15 W/7343-15 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 D/7343-31 D/7343-31 V/7343-19 V/7343-19 D/7343-31 D/7343-31 V/7343-19 V/7343-19 D/7343-31 D/7343-31 V/7343-19 D/7343-31 X/7343-43 T521B335M035A(1)E150 T521B335M035A(1)E200 T521B475M035A(1)E150 T521B475M035A(1)E200 T521T685M035APE090 T521B685M035A(1)E150 T521B685M035A(1)E200 T521B106M035A(1)E150 T521B106M035A(1)E200 T521V106M035A(1)E120 T521V156M035A(1)E100 T521V156M035A(1)E125 T523W226M035APE100 T521D226M035A(1)E040 T521D226M035A(1)E060 T523V336M035APE100 T521D336M035A(1)E065 T523V476M035APE100 T521X476M035A(1)E030 T521X476M035A(1)E070 T523W476M035APE090 T523W476M035APE100 T521B684M050A(1)E200 T521B105M050A(1)E200 T521B155M050A(1)E200 T521B225M050A(1)E200 T521B335M050A(1)E200 T521D565M050A(1)E070 T521D565M050A(1)E090 T521V565M050A(1)E070 T521V565M050A(1)E090 T521D685M050A(1)E070 T521D685M050A(1)E090 T521V685M050A(1)E070 T521V685M050A(1)E090 T521D106M050A(1)E090 T521D106M050A(1)E120 T521V106M050A(1)E090 T521D186M050A(1)E090 T521X186M050A(1)E070 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 900 800 900 800 1,100 900 800 900 800 1,200 1,400 1,200 1,988 2,400 1,900 1,400 1,900 1,400 2,900 1,900 2,100 1,988 800 800 800 800 800 1,800 1,600 1,800 1,600 1,800 1,600 1,800 1,600 1,600 1,369 1,600 1,600 1,900 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 4 3 3 4 3 4 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 125 105 105 105 105 125 125 125 105 125 125 105 125 105 125 125 85 85 105 105 105 105 105 125 125 125 125 125 125 125 125 125 125 125 125 125 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 27 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont. Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 90 90 110 110 110 165 165 4.3 6.3 9.5 29.6 29.61 29.6 42.8 63 94.5 94.5 138.6 35.3 75 112.5 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 10 10 10 10 10 10 10 8 8 8 6 10 10 10 10 10 10 10 10 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 50 35 90 75 50 75 50 200 200 200 200 300 75 75 50 35 150 75 75 50 35 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 50 50 50 50 50 50 50 63 63 63 63 63 63 63 63 63 63 63 75 75 75 F KEMET/EIA (See below for part options) 18 18 22 22 22 33 33 0.68 1 1.5 4.7 4.7 4.7 6.8 10 15 15 22 4.7 10 15 X/7343-43 X/7343-43 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 B/3528-21 B/3528-21 B/3528-21 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 X/7343-43 X/7343-43 T521X186M050A(1)E050 T521X186M050A(1)E035 T521D226M050A(1)E090 T521X226M050A(1)E075 T521X226M050A(1)E050 T521X336M050A(1)E075 T521X336M050A(1)E050 T521B684M063A(1)E200 T521B105M063A(1)E200 T521B155M063A(1)E200 T521C475M063A(1)E200 T521D475M063A(1)E300 T521D475M063A(1)E075 T521D685M063A(1)E075 T521X106M063A(1)E050 T521X156M063A(1)E035 T521X156M063A(1)E150 T521X226M063A(1)E075 T521D475M075A(1)E075 T521X106M075A(1)E050 T521X156M075A(1)E035 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature (rms) mA at +45C 100 kHz 2,200 2,700 1,600 1,815 2,200 1,815 2,200 800 800 800 900 900 1,700 1,700 2,200 2,600 1,300 1,815 1,700 2,200 2,600 Reflow Temp 260C C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 125 125 125 125 125 125 105 105 105 105 125 125 125 125 125 125 125 125 125 125 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 28 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Derating Guidelines For Parts with Maximum Operational Temperature of 125C For Parts with Maximum Operational Temperature of 85C 100% 90% 95% 85% 90% 80% 85% 75% Recommended Application Voltage 70% 65% 60% 60% 55% 50% -55 95% % Rated Voltage % Rated Voltage 95% 80% 75% Rated Voltage Recommended Application Voltage 70% 65% 60% 55% 25 85 TemperatureC 105 50% -55 125 25 Temperature C 85 For Parts with Maximum Operational Temperature of 105C 90% % Rated Voltage 85% Recommended Application Voltage 80% 75% Recommended Application Voltage for series: T523, T527, T529 70% 65% 60% 55% 50% -55 25 Temperature C 85 105 Recommended Application Voltage KO-CAPs are solid state capacitors that demonstrate no wearout mechanism when operated within their recommended guidelines. While the KO-CAP can be operated at full rated voltage, most circuit designers seek a minimum level of assurance in long term reliability, which should be demonstrated with data. A voltage derating can provide the desired level of demonstrated reliability based on industry accepted acceleration models.Since most applications do require long term reliability, KEMET recommends that designers consider a voltage derating, according to the graphic above, for the maximum steady state voltage. Voltage Rating 75 V VR Maximum Recommended Steady State Voltage -55C to 105C 105C to 125C 90% of VR 60% of VR VR = Rated Voltage (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 29 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage, which may be applied is limited by two criteria: a. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. b. The negative peak AC voltage, in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. The maximum power dissipation must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Ripple Current T 45C 1.00 45 C < T 85C 0.70 85C < T 125C 0.25 T= Environmental Temperature Surge Voltage Surge voltage is the maximum voltage (peak value) which may be applied to the capacitor. The surge voltage must not be applied for periodic charging and discharging in course of normal operation and cannot be part of the application voltage. Surge voltage capability is demonstrated by application of 1,000 cycles at operating temperature. The parts are charged through a 33 Ohm resistor for 30 seconds and then discharged though a 33 Ohm resistor for each cycle. Rated Voltage (V) Surge Voltage (V) Category Voltage (V) Category Surge Voltage (V) -55C to 105C up to 125C 2.5 3.3 1.7 2.2 6.3 8.2 4.2 5.5 10 13.0 6.7 8.7 16 20.8 10.7 13.9 20 26.0 13.4 17.4 25 32.5 16.8 21.8 35 45.5 23.5 30.5 50 65.0 33.5 43.6 Reverse Voltage Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. Temperature Permissible Transient Reverse Voltage 25C 15% of Rated Voltage 55C 10% of Rated Voltage 85C 5% of Rated Voltage 105C 3% of Rated Voltage 125C* 1% of Rated Voltage *For series rated to 125C (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 30 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 2 - Land Dimensions/Courtyard T520/T521/T525/T530 KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 A 3216-18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 B 3528-21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 C 6032-28 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 D 7343-31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 H 7360-20 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 L 6032-19 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 M 3528-15 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 Q 7343-12 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 T 3528-12 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 U 6032-15 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 V 7343-21 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 W 7343-15 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 X1 7343-43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Y1 7343-40 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 31 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 2 - Land Dimensions/Courtyard cont. T523 KEMET Metric Size Code Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 W 7343-15 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 V 7343-20 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 G 7360-12 4.60 3.07 3.07 10.22 7.30 4.48 2.67 3.27 9.12 6.80 4.38 2.29 3.43 8.26 6.54 J 7360-15 4.60 3.07 3.07 10.22 7.30 4.48 2.67 3.27 9.12 6.80 4.38 2.29 3.43 8.26 6.54 H 7360-20 4.60 3.07 3.07 10.22 7.30 4.48 2.67 3.27 9.12 6.80 4.38 2.29 3.43 8.26 6.54 Maximum (Most) Land Protrusion (mm) Median (Nominal) Land Protrusion (mm) Minimum (Least) Land Protrusion (mm) V1 L L W V2 W S Grid Placement Courtyard T527 / T529 KEMET Metric Size Code Dimensions (mm) Minimum - Maximum Case EIA G Z X Y A08 3216-08 1.00 - 1.65 3.25 - 3.80 1.1 - 1.30 0.8 - 1.40 I 3216-10 1.00 - 1.65 3.25 - 3.80 1.10 - 1.30 0.80 - 1.40 S 3216-12 1.00 - 1.65 3.25 - 3.80 P 2012-10 0.40 - 1.05 2.05 - 2.60 1.10 - 1.30 0.80 - 1.00 0.80 - 1.40 0.50 - 1.10 (JEITA RC-2371 is recommended for reference) X X Y G Z Y (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 32 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Soldering Process Please note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. "Wiping" the edges of a chip and heating the top surface is not recommended. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100C 150C Temperature Maximum (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60 - 120 seconds 60 - 120 seconds Ramp-up Rate (TL to TP) 3C/seconds maximum 3C/seconds maximum Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60 - 150 seconds 220C* 235C** 60 - 150 seconds 250C* 260C** Peak Temperature (TP) Time within 5C of Maximum 20 seconds maximum 30 seconds maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) 6C/seconds maximum 6C/seconds maximum Time 25C to Peak 6 minutes maximum 8 minutes maximum Temperature Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. * For Case Size height > 2.5 mm ** For Case Size height 2.5 mm TP TL Temperature The KEMET families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp-up Rate = 3C/second Maximum Ramp-down Rate = 6C/second tL Tsmax Tsmin 25 ts 25C to Peak Time Storage All KO-CAP Series are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC). These parts are classified as MSL3 (Moisture Sensitivity Level 3) per IPC/JEDEC J-STD-020 and packaged per IPC/JEDEC J-STD-033. MSL3 specifies a floor time of 168H at 30C maximum temperature and 60% relative humidity. Unused capacitors should be sealed in a MBB with fresh desiccant. The calculated shelf life in a sealed bag would be 12 months from a bag seal date in a storage environment of < 40C and humidity < 90% RH. It should be 24 months from a bag seal date in a storage environment of < 30C and humidity < 70% RH. If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 33 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Construction T520/T521/T525/T530 Molded Epoxy Case Detailed Cross Section Polarity Stripe (+) Silver Paint (Fourth Layer) Polarity Bevel (+) Wire Leadframe (- Cathode) Wire Weld (to attach wire) Carbon (Third Layer) Silver Adhesive Leadframe (+ Anode) Molded Epoxy Case Polymer (Second Layer) Ta2O5 Dielectric (First Layer) Tantalum T523 Polarity Stripe (+) Molded Epoxy Case Tantalum Wire Leadframe (- Cathode) Spacer Weld (to attach wire) Leadframe (+ Anode) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Detailed Cross Section Carbon (Third Layer) Silver Paint (Fourth Layer) Polymer (Second Layer) Ta2O5 Dielectric (First Layer) Tantalum Tantalum Wire T2076_T52X-530 * 1/8/2021 34 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Construction cont. T527 Polarity Stripe (+) Detailed Cross Section Carbon (Third Layer) Silver Paint (Fourth Layer) Molded Epoxy Case Wire Wire Spacer Leadframe (- Cathode) Silver Adhesive Polymer (Second Layer) Ta2O5 Dielectric (First Layer) Tantalum Leadframe (+ Anode) Weld (to attach wire) T529 Polarity Stripe (+) Molded Epoxy Case Detailed Cross Section Carbon (Third Layer) Silver Paint (Fourth Layer) Wire (- Cathode) Polymer (Second Layer) Wire Spacer Substrate Silver Adhesive Weld (to attach wire) Ta2O5 Dielectric (First Layer) Tantalum (+ Anode) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 35 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Capacitor Marking T520/T521/T523/T525/T530 (KO) KEMET Organic Polymer Polarity Indicator (+) Date Code* 1 digit = Last number of Year 6 = 2016 7 = 2017 8 = 2018 9 = 2019 0 = 2020 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year st Picofarad Code KEMET ID Rated Voltage Date Code* * 011 = 11th week of 2020 T520A/T527 Polarity Indicator (+) Code e g J A E Rated Voltage 2.5 V 4V 6.3 V 10 V 25 V Date Code Voltage and Capacitance Code Code A E7 J7 N7 Capacitance 10 15 22 33 Code S7 w A8 J8 Capacitance 47 68 100 220 Date Code* Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2017 A B C D E F G H J K L M 2018 N P Q R S T U V W X Y Z 2019 a b c d e f g h j k l m 2020 n p q r s t u v w x y z (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 36 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Capacitor Marking cont. T520B/T521B/T520T Polarity Indicator (+) Voltage and Capacitance Code Code e g J A C D E Rated Voltage 2.5 V 4V 6.3 V 10 V 16 V 20 V 25 V Code E7 J7 N7 A8 Capacitance 15 22 33 100 Code E8 J8 N8 S8 Capacitance 150 220 330 470 Code J A C E Rated Voltage 6.3 V 10 V 16 V 25 V Code S a j s Capacitance (F) 4.7 10 22 47 ID Code Date Code T529 Polarity Indicator (+) Date Code Voltage and Capacitance Code Date Code* Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2017 A B C D E F G H J K L M 2018 N P Q R S T U V W X Y Z 2019 a b c d e f g h j k l m 2020 n p q r s t u v w x y z (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 37 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Tape & Reel Packaging Information KEMET's molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only (+) Embossed carrier (-) Embossment Top tape thickness 0.10 mm (0.004") maximum thickness 180 mm (7.0") or 330 mm (13.") 8 mm (0.315") or 12 mm (0.472") Table 3 - Packaging Quantity Case Code KEMET P R 08A I S A T M B U L C Q W Z V D Y X J H O EIA 2012-10 2012-12 3216-08 3216-10 3216-12 3216-18 3528-12 3528-15 3528-21 6032-15 6032-19 6032-28 7343-12 7343-15 7343-17 7343-19 7343-31 7343-40 7343-43 7360-15 7360-20 7360-43 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 8 8 8 8 8 8 12 12 12 12 12 12 12 12 12 12 12 12 12 3,000 2,500 3,000 3,000 3,000 2,000 3,000 2,500 2,000 1,000 1,000 500 1,000 1,000 1,000 1,000 500 500 500 1,000 1,000 250 N/A 10,000 N/A N/A N/A N/A 10,000 8,000 8,000 5,000 3,000 3,000 3,000 3,000 3,000 3,000 2,500 2,000 2,000 3,000 3,000 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 38 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 OD0 P0 (10 pitches cumulative tolerance on tape 0.2 mm) A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity B1 is for tape feeder reference only, including draft concentric about B0. Embossment For cavity size, see Note 1, Table 4 OD1 Cover Tape User Direction of Unreeling Table 4 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size 8 mm 12 mm D1 Minimum Note 1 D0 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 1.0 (0.039) 1.5 (0.059) E1 P0 R Reference S1 Minimum T1 T Maximum Note 2 Note 3 Maximum P2 1.75 0.10 4.0 0.10 2.0 0.05 (0.069 0.004) (0.157 0.004) (0.079 0.002) 25.0 (0.984) 30 (1.181) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 8 mm Single (4 mm) 4.35 (0.171) 6.25 (0.246) 12 mm Single (4 mm) and Double (8 mm) 8.2 (0.323) 10.25 (0.404) E2 Minimum F P1 3.5 0.05 2.0 0.05 or 4.0 0.10 (0.138 0.002) (0.079 0.002 or 0.157 0.004) 2.0 0.05 (0.079 0.002) or 5.5 0.05 4.0 0.10 (0.157 0.004) or (0.217 0.002) 8.0 0.10 (0.315 0.004) T2 Maximum W Maximum A0, B0 & K0 2.5 (0.098) 8.3 (0.327) 4.6 (0.181) 12.3 (0.484) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481-D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481-D for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 39 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8, 12 Bo Maximum Rotation ( 20 T) s Tape Maximum Width (mm) Rotation ( 8, 12 20 Typical Component Centerline S) Ao Figure 3 - Maximum Lateral Movement Figure 4 - Bending Radius 8 and 12 mm Tape 0.5 mm maximum 0.5 mm maximum Embossed Carrier Punched Carrier R (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Bending Radius R T2076_T52X-530 * 1/8/2021 40 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Figure 5 - Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (O 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm Variable Dimensions -- Millimeters (Inches) Tape Size 8 mm 12 mm N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 14.4 (0.567) 18.4 (0.724) Shall accommodate tape width without interference (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 41 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Figure 6 - Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 and 12 mm only END Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum Leader 400 mm minimum Top Cover Tape Figure 7 - Maximum Camber Elongated Sprocket Holes (32 mm and wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 42 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 1/8/2021 43