FT01...N SURFACE MOUNT TRIAC SOT223 (Plastic) On-State Current Gate Trigger Current 1 Amp < 3 mA to < 25 mA Off-State Voltage MT2 200 V / 400 V MT1 MT2 The FT01 series of TRIACs uses a high performance PNPN technology. G These parts are intended for general purpose applications where logic compatible gate sensitivity is required using surface mount technology. Absolute Maximum Ratings, according to IEC publication No. 134 SYMBOL PARAMETER IT(RMS) ITSM ITSM I2t IGM PGM PG(AV) di/dt RMS On-state Current Non-repetitive On-State Current Non-repetitive On-State Current Fusing Current Peak Gate Current Peak Gate Dissipation Gate Dissipation Critical rate of rise of on-state current di/dt Critical rate of rise of on-state current Tj Tstg Tsld Operating Temperature Storage Temperature Soldering Temperature SYMBOL VDRM VRRM CONDITIONS Min. All Conduction Angle, Ttab = 90 C Half Cycle, 60 Hz Half Cycle, 50 Hz t = 10 ms, Half Cycle 20 s max. 20 s max. 20 ms max. IG = 50 mA, diG/dt = 0.1 A/s Repetitive f = 50 Hz IG = 50 mA, diG/dt = 0.1 A/s Non Repetitive Repetitive Peak Off State Voltage 1 8.5 8 0.35 10 50 A/s 1 2 0.1 1.6 mm from case, 10s max. +125 +150 260 VOLTAGE B 200 Unit A A A A2s A W W A/s -40 -40 PARAMETER Max. C C C Unit D 400 V Jan - 02 FT01...N SURFACE MOUNT TRIAC Electrical Characteristics SYMBOL IGT PARAMETER Gate Trigger Current VD = 12 VDC , RL = 140, Tj = 25 C IDRM /IRRM Off-State Leakage Current VTM * VGT VGD IH * IL Quadrant CONDITIONS On-state Voltage Gate Trigger Voltage Holding Current Latching Current VD = VDRM , VR = VRRM , Tj = 110 C Tj = 25 C IT = 1.4 Amp, tp = 380 s, Tj = 25 C VD = 12 VDC , RL = 140, Tj = 25 C VD = VDRM , RL = 3.3K, Tj = 125 C IT = 50 mA , Gate open, Tj = 25 C IG = 1.2 IGT, Tj = 25 C dv / dt* Critical Rate of Voltage Rise VD = 0.67 x VDRM , Gate open SENSITIVITY 02 03 05 07 Q1/Q3 MAX 3 3 5 5 MAX 3 5 5 7 Q4 200 MAX 10 MAX 1.8 MAX 1.5 Q1/Q4 MAX 0.2 Q1/Q4 MIN 7 10 MAX 10 7 Q1, Q3, Q4 TYP 14 20 TYP Q2 20 10 MIN Unit 09 10 10 25 mA 10 25 A V V V 10 25 mA 10 25 mA 20 50 50 100 V/s Tj = 110 C (dv/dt)c* tgd Rth(j-t) Rth(j-a) (di/dt)c = 0.35 A/ms, Tj = 110 C Q1/Q4 Gate Controlled Delay Time IG = 40 mA, diG/dt = 0.5 A/s, VD = VDRM, IT = 1.1 A, Tj = 25 C Thermal Resistance Junction-tab for DC MIN TYP MAX 2 1 Thermal Resistance Junction-Ambient 5 V/s 1 2 s 30 C/W 60 C/W * for either polarity of electrode MT2 voltage with reference to electrode MT1. PART NUMBER INFORMATION F T 01 10 B N 00 RB FAGOR PACKAGING FORMING SCR CURRENT CASE VOLTAGE SENSITIVITY Jan - 02 FT01...N SURFACE MOUNT TRIAC Fig. 2: Correlation between maximum power dissipation and maximum allowable temperature (Tamb and T tab). Fig. 1: Maximum power dissipation versus RMS on-state current P (W) T tab (C) P (W) 1.6 1.6 1.4 = 180 180 Rth (j-l) C/W = 120 1.2 1.0 1.2 -95 -100 Rth (j-a) C/W 0.8 = 60 0.4 -90 1.0 = 90 0.6 1.4 = 30 0.2 IT(RMS)(A) 0.0 0.8 -105 0.6 -110 0.4 -115 0.2 -120 -125 Tamb (C) 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 20 40 60 80 100 120 140 Fig. 4: Relative variation of thermal impedance junction to ambient versus pulse duration. Fig. 3: RMS on-state current versus tab temperature I T(RMS) (A) Zth(j-a) / Rth(j-a) 1.2 1.00 1.0 = 180 0.8 0.10 0.6 0.4 Standard foot print, e(Cu) = 35 m 0.2 T tab (C) 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 Fig. 5: Relative variation of gate trigger current and holding current versus junction temperature. Igt (Tj) Ih (Tj) Igt (Tj = 25 C) Ih (Tj = 25 C) 0.01 1E-3 tp (s) 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 Fig. 6: Non repetitive surge peak on-state current versus number of cycles. I TSM (A) 2.6 8 Tj initial = 25 C 2.4 2.2 6 2.0 Igt 1.8 1.6 4 1.4 1.2 Ih 1.0 2 0.8 0.6 0.4 Tj (C) -40 -20 0 20 40 60 80 100 120 140 Number of cycles 0 1 10 100 1000 Jan - 02 FT01...N SURFACE MOUNT TRIAC Fig. 7: Non repetitive surge peak on-state current for a sinusoidal pulse with width: tp 10 ms, and corresponding value of I2t. Fig. 8: On-state characteristics (maximum values). ITSM(A). I2t (A2s) ITM(A) 10 100 Tj initial = 25 C 10 Tj initial 25 C ITSM Tj max 1 Tj max Vto = 1.10 V Rt = 0.420 1 I2 t tp(ms) 0.1 1 10 0.1 VTM(V) 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 PACKAGE MECHANICAL DATA SOT223 (Plastic) A B 16 max. (4x) C REF. 10 max. H E I J K D F G A B C D E F G H I J K Min. 6.30 6.70 3.30 2.95 0.65 1.50 0.50 0.25 DIMENSIONS Milimeters Typ. 6.50 7.00 3.50 4.60 2.30 3.00 0.70 1.60 0.60 0.02 0.30 Max. 6.70 7.30 3.70 3.15 0.85 1.70 0.70 0.05 0.35 Weight: 0.11 g FOOT PRINT 3.3 1.5 (3x) 1 2.3 6.4 1.5 4.6 Jan - 02