Revised January 2005 NC7S08 TinyLogic HS 2-Input AND Gate General Description Features The NC7S08 is a single 2-Input high performance CMOS AND Gate. Advanced Silicon Gate CMOS fabrication assures high speed and low power circuit operation over a broad VCC range. ESD protection diodes inherently guard both inputs and output with respect to the VCC and GND rails. Three stages of gain between inputs and outputs assures high noise immunity and reduced sensitivity to input edge rate. Space saving SOT23 or SC70 5-lead package Ultra small MicroPak Pb-Free leadless package High Speed; tPD 3.5 ns typ Low Quiescent Power; ICC 1 PA Balanced Output Drive; 2 mA IOL, 2 mA IOH Broad VCC Operating Range; 2V-6V Balanced Propagation Delays Specified for 3V operation Ordering Code: Order Number Package Product Code Number Package Description Top Mark Supplied As NC7S08M5X MA05B 7S08 5-Lead SOT23, JEDEC MO-178, 1.6mm 3k Units on Tape and Reel NC7S08M5X_NL (Note 1) MA05B 7S08 Pb-Free 5-Lead SOT23, JEDEC MO-178, 1.6mm 3k Units on Tape and Reel 3k Units on Tape and Reel NC7S08P5X MAA05A S08 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide NC7S08P5X_NL MAA05A (Note 1) S08 Pb-Free 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel NC7S08L6X PP Pb-Free 6-Lead MicroPak, 1.0mm Wide MAC06A 5k Units on Tape and Reel Note 1: "_NL" indicates Pb-Free product (per JEDEC J-STD-020B). Device is available in Tape and Reel only. TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak is a trademark of Fairchild Semiconductor Corporation. (c) 2005 Fairchild Semiconductor Corporation DS012141 www.fairchildsemi.com NC7S08 TinyLogic HS 2-Input AND Gate October 1995 NC7S08 Logic Symbol Connection Diagrams IEEE/IEC Pin Assignments for SC70 and SOT23 Pin Descriptions Pin Names Description A, B Inputs Y Output NC No Connect (Top View) Pad Assignments for MicroPak Function Table Y AB Inputs H Output A B L L Y L L H L H L L H H H HIGH Logic Level www.fairchildsemi.com L (Top Thru View) LOW Logic Level 2 DC Input Diode Current (IIK) @ VIN d 0.5V @ VIN t VCC 0.5V DC Input Voltage (VIN ) DC Output Diode Current (IOK) @ VOUT 0.5V @ VOUT ! VCC 0.5V DC Output Voltage (VOUT) Storage Temperature (TSTG) Junction Temperature (TJ) Input Rise and Fall Time (tr, tf) VCC @ 2.0V 0 to 1000 ns VCC @ 3.0V 0 to 750 ns VCC @ 4.5V 0 to 500 ns VCC @ 6.0V 0 to 400 ns Thermal Resistance (TJA) 300qC/W SOT23-5 425qC/W SC70-5 Note 2: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of circuits outside databook specifications. 260qC (Soldering, 10 seconds) 0V to VCC 40qC to 85qC Operating Temperature (TA) r25 mA 65qC to 150qC 150qC Power Dissipation (PD) @85qC 0V to VCC Output Voltage (VOUT) r12.5 mA Lead Temperature (TL); 2.0V to 6.0V Input Voltage (VIN) 20 mA 20 mA 0.5V to VCC 0.5V or Sink Current (IOUT) per Output Pin (ICC or IGND) Supply Voltage (VCC) 20 mA 20 mA 0.5V to VCC 0.5V DC Output Source DC VCC or Ground Current Recommended Operating Conditions (Note 3) Note 3: Unused inputs must be held HIGH or LOW. They may not float. SOT23-5 200 mW SC70-5 150 mW DC Electrical Characteristics Symbol VIH VIL VOH VOL Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage VCC (V) TA Min 25qC Typ TA Max 40qC to 85qC Min 2.0 1.50 1.50 3.0-6.0 0.7 VCC 0.7 VCC Max 2.0 0.50 0.50 0.3 VCC 0.3 VCC 2.0 1.90 2.0 1.90 2.90 3.0 2.90 4.5 4.40 4.5 4.40 6.0 5.90 6.0 5.90 3.0 2.68 2.85 2.63 4.5 4.18 4.35 4.13 6.0 5.68 5.85 5.63 2.0 0.0 0.10 Conditions V 3.0-6.0 3.0 Units V V V IOH 20 PA VIN VIH VIN VIH IOH 1.3 mA IOH 2 mA IOH 2.6 mA 0.10 3.0 0.0 0.10 0.10 4.5 0.0 0.10 0.10 6.0 0.0 0.10 0.10 3.0 0.1 0.26 0.33 4.5 0.1 0.26 0.33 6.0 0.1 V V IOL 20 PA VIN VIL VIN VIH or VIL IOH 1.3 mA IOL 2 mA 0.26 0.33 IOL 2.6 mA IIN Input Leakage Current 6.0 r0.1 r1.0 PA VIN VCC, GND ICC Quiescent Supply Current 6.0 1.0 10.0 PA VIN VCC, GND 3 www.fairchildsemi.com NC7S08 Absolute Maximum Ratings(Note 2) Supply Voltage (VCC) 0.5V to 7.0V NC7S08 AC Electrical Characteristics Symbol tPLH, Parameter Propagation Delay tPHL tTLH, Output Transition Time tTHL CIN Input Capacitance CPD Power Dissipation Capacitance VCC (V) TA Min 25qC Typ TA Max 40qC to 85qC Min Max 5.0 3.5 15 2.0 20 100 125 3.0 11 27 35 4.5 8 20 25 21 6.0 7 17 5.0 3.0 10 2.0 25 125 155 3.0 16 35 45 4.5 11 25 31 6.0 9 21 26 Open 2 10 10 5.0 6 Units Conditions ns CL 15 pF ns CL 50 pF ns CL 15 pF ns CL 50 pF Figure Number Figures 1, 3 Figures 1, 3 pF pF (Note 4) Figure 2 Note 4: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD (CPD)(VCC)(fIN) (ICCstatic). AC Loading and Waveforms CL includes load and stray capacitance Input PRR 1.0 MHz; tW 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input AC Waveform; PRR variable; Duty Cycle 50% FIGURE 2. ICCD Test Circuit www.fairchildsemi.com 4 TAPE FORMAT for SC70 and SOT23 Package Tape Designator M5X, P5X Number Cavity Section Cavities Status Cover Tape Status Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed TAPE DIMENSIONS inches (millimeters) Package SC70-5 SOT23-5 Tape Size 8 mm 8 mm DIM A DIM B 0.093 0.096 (2.35) (2.45) 0.130 0.130 (3.3) (3.3) DIM F DIM P1 DIM W 0.157 0.315 r 0.004 0.138 r 0.002 0.055 r 0.004 0.157 (3.5 r 0.10) (3.5 r 0.05) 5 DIM Ko 0.138 r 0.004 0.053 r 0.004 (1.35 r 0.10) (1.4 r 0.11) (4) (4) (8 r 0.1) 0.315 r 0.012 (8 r 0.3) www.fairchildsemi.com NC7S08 Tape and Reel Specification NC7S08 Tape and Reel Specification TAPE FORMAT for MicroPak Package (Continued) Tape Number Cavity Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed Designator L6X Cover Tape Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 0.331 0.059/0.000 7.0 0.059 0.512 0.795 2.165 (177.8) (1.50) (13.00) (20.20) (55.00) www.fairchildsemi.com (8.40 1.50/0.00) 6 W2 W3 0.567 W1 0.078/0.039 (14.40) (W1 2.00/1.00) NC7S08 Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B 7 www.fairchildsemi.com NC7S08 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A www.fairchildsemi.com 8 NC7S08 TinyLogic HS 2-Input AND Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 9 www.fairchildsemi.com