|||||||||||||||
AP2S
2.5 x 2.0 x 0.9mm
• Performance comparable to fixed frequency oscillator
• Lowest peak-to-peak jitter
• Low supply current
• Short lead time
• Suitable for mass production
• Alternative to long lead-time XO's
Pb
RoHS
Compliant
For Small
Quantities,
Delivery Time
is 1-5 days
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
OPTIONS & PART IDENTIFICATION:
(Left blank if standard)
FEATURES:
ELECTRICAL SPECIFICATIONS:
SURFACE-MOUNT CMOS PROGRAMMABLE OSCILLATOR
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 |fax 949-546-8001 | www.abracon.com
Revised: 08.07.09
Visit www.abracon.com for Terms & Conditions of Sale
Unit
MHz
MHz
MHz
°C
ppm
V
V
V
mA
mA
mA
pF
V
V
V
V
V
V
%
uA
nSec
nSec
psec
* Inclusive of calibration @25°C, operating temperature range, input voltage variation, load variation, aging,
shock, and vibration.
--5- .2-
Symmetry
----
Rise Time (10%->90% Vdd)
10
45
Output Load
Freq. stability
over operating temp.* (See Options)
0.33--
Input Current (2.5V)
Input Current (3.3V)
Output Type
25
5550
--
Output "0" level (3.3V) --
--
--79 -. -2
0.25
CMOS
Operating Temp. Range (See Options)
Characteristics mumixaMmumin li acipyTM
Frequency Range (3.3V)
2.75
90--
00100 -1 --
1.98
--5- 1-
(2.5V) 3
1.62
(1.8V) --3
Input Voltage (Operating Vdd)
1.8
5.252.2
3.379.2
--
** Jitter performance depends on programing parameter and output frequency. Please contact ABRACON for additional info.
--
Input Current (1.8V)
--
0.18
--
--
1.62
--
--
--
--
2.25
Fall Time (90%->10% Vdd) 5.2--
Tri-state Function
(Input to pin 1)
pin 1 : High or Open , pin 3 : Enable
pin 1 : Low , pin 3 : Disable
110--
15
060 -1 -
-
3.63
75
3
(1.8V)
(2.5V)
(2.5V)
(1.8V)
Output "1" level (3.3V)
Jitter peak-to-peak**
Blank* 3.3 V I 0°C to +50°C J*** ±20ppm **Blank OE Blank Bulk
1 2.5 V D -10°C to +60°C R±25ppm **B PDB T Tape and Reel
2 1.8 V E -20°C to +70°C K±30ppm Ask for Tube Package
*3.3V : Standard F -30°C to +70°C C±50ppm
N-30°C to +85°C
L-40°C to +85°C
(***_ Available for I, D, or E temp options only.
Contact ABRACON for EJ or LR options. (Availability limited)
(****) Frequency in MHz
** OE: Tri-state the output buffer.
** PDB: Tri-state the output buffer and shut off the oscillator, <10µA when PDB enabled.
Operating Temp. Freq. Stability
AP2S -Frequency****- - - -
Supply Voltage PackagingPIN 1(Option)
12
Standby Current (PIN 1 option: B)
40 to 200
|||||||||||||||
AP2S
2.5 x 2.0 x 0.9mm
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
SURFACE-MOUNT CMOS PROGRAMMABLE OSCILLATOR
PIN
# 1
# 2
# 3
# 4
CONNECTION
STAND-BY / OE
GND/CASE
OUTPUT
VDD
Note: : It is recommended to use
an approximately 0.01uF bypass
capacitor between PIN 2 and 4.
Dimensions: Inches (mm)
OUTLINE DRAWING:
TEST CIRCUIT:
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 |fax 949-546-8001 | www.abracon.com
Revised: 08.07.09
Visit www.abracon.com for Terms & Conditions of Sale
NOTE: Abracon manufactured products are intended for general commercial and industrial use. For applications requiring
high reliability and/or presenting extreme operating environment, written consent & authorization from Abracon is required.
REFLOW PROFILE:
