SURFACE-MOUNT CMOS PROGRAMMABLE OSCILLATOR AP2S Pb RoHS Compliant 2.5 x 2.0 x 0.9mm | | | | | | | | | | | | | | | FEATURES: For Small Quantities, Delivery Time is 1-5 days * Short lead time * Suitable for mass production * Alternative to long lead-time XO's * Performance comparable to fixed frequency oscillator * Lowest peak-to-peak jitter * Low supply current ELECTRICAL SPECIFICATIONS: Characteristics Frequency Range (3.3V) (2.5V) (1.8V) Operating Temp. Range (See Options) Freq. stability over operating temp.* (See Options) Input Voltage (Operating Vdd) Input Current Input Current Input Current Output Type Output Load Output "0" level Output "1" level Symmetry (3.3V) (2.5V) (1.8V) (3.3V) (2.5V) (1.8V) (3.3V) (2.5V) (1.8V) Standby Current (PIN 1 option: B) Rise Time (10%->90% Vdd) Fall Time (90%->10% Vdd) Tri-state Function (Input to pin 1) Jitter peak-to-peak** Unit MHz MHz MHz C Minimum 3 3 3 -10 Typical ----- Maximum 110 90 75 60 ppm V V V mA mA mA -100 2.97 2.25 1.62 -3.3 2.5 1.8 100 3.63 2.75 1.98 25 15 pF V V V V V V % uA nSec nSec ----2 .9 7 2.25 1.62 45 ---- psec -- 12 CMOS 15 ------50 -2.5 2.5 pin 1 : High or Open , pin 3 : Enable pin 1 : Low , pin 3 : Disable 40 to 200 -0.33 0.25 0.18 ---55 10 ---- * Inclusive of calibration @25C, operating temperature range, input voltage variation, load variation, aging, shock, and vibration. ** Jitter performance depends on programing parameter and output frequency. Please contact ABRACON for additional info. OPTIONS & PART IDENTIFICATION: (Left blank if standard) Supply Voltage Blank* 3.3 V 1 2.5 V 2 1.8 V *3.3V : Standard AP2S -Frequency****- - - Operating Temp. 0C to +50C I -10C to +60C D -20C to +70C E -30C to +70C F -30C to +85C N -40C to +85C L Freq. Stability 20ppm J*** 25ppm R 30ppm K 50ppm C PIN 1(Option) OE **B PDB **Blank Packaging Bulk Blank T Tape and Reel Ask for Tube Package (***_ Available for I, D, or E temp options only. Contact ABRACON for EJ or LR options. (Availability limited) (****) Frequency in MHz ** OE: Tri-state the output buffer. ** PDB: Tri-state the output buffer and shut off the oscillator, <10A when PDB enabled. ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.07.09 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SURFACE-MOUNT CMOS PROGRAMMABLE OSCILLATOR AP2S Pb RoHS Compliant 2.5 x 2.0 x 0.9mm | | | | | | | | | | | | | | | TEST CIRCUIT: OUTLINE DRAWING: PIN #1 #2 CONNECTION STAND-BY / OE GND/CASE #3 #4 OUTPUT VDD Note: : It is recommended to use an approximately 0.01uF bypass capacitor between PIN 2 and 4. Dimensions: Inches (mm) REFLOW PROFILE: NOTE: Abracon manufactured products are intended for general commercial and industrial use. For applications requiring high reliability and/or presenting extreme operating environment, written consent & authorization from Abracon is required. ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.07.09 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com