9300-9400 SERIES/SURFACE MOUNT REED RELAYS 9300-9400 Series Surface Mount Reed Relays Ideally suited to the needs of Automated Test Equipment, Instrumen-tation and Telecommunications requirements, Coto's 9300 and 9400 Series specification tables allow you to select the appropriate relay for your particular application. If your requirements differ, please consult your local representative or Coto's Factory to discuss a custom design. 9300-9400 Series Features u High Insulation Resistance - 1012 minimum (1013 Typical) u High reliability, hermetically sealed contacts for long life u Molded thermoset body on integral lead frame design u High speed switching compared to electromechanical relays u Tape & Reel available u UL File #E67117 - Contact factory for details u RoHS compliant 9300 Series u Load switching (15 Watts) and high dielectric strength (500 VDC) between contacts u Proven Reliable to switch telephone loads (48V, 100mA) DIMENSIONS in Inches (Millimeters) Model 9300 .100 TYP (2.54) Gull Wing2 .100 TYP (2.54) .900 (22.86) .020 (0.51) .240 (6.09) .750 (19.0) MAX. 9300 9301 End View .100 TYP (2.54) .240 (6.09) .100 (2.54) .018 (0.45) 05=5 volts 12=12 volts .700 .025 (17.78) (0.64) .020 .025 (0.64) .270 (6.86) .270 (6.86) .018 .018 (0.45) Indicates (0.45) Pin #1 side .225 (5.71) .225 (5.72) .025 (0.64) .500 (12.70) .225 (5.72) .500 (12.70) Indicates Pin #1 side .020 Indicates (0.51)Pin #1 side 9401 .150 .550 (3.81) .550 (J lead shown) 9401 .100 .100 (J.750 lead shown) (2.54) (2.54) (19.0) MAX. (14.0) (14.0) .225 (5.72) .1509402 (3.81) (J lead shown) Top View .225 (5.71) .150 (3.81) .020 (0.51) .150 (3.81) .020 (0.51) J-Lead2 .020 (0.51) .225 (5.71) .225 (5.71) Gull Wing2 .025 (0.64) .225 (5.71) .075 (1.90) .020 (0.51) 9402 End View (J Lead Shown) 9401 End View (J Lead Shown) Ordering Information 9XXX-XX-XX Part Number Model Number Lead Style 9301 9401 9402 00=Gull Wing 20=J-Lead Coil Voltage .225 (5.72) .700 (17.78) .700 (17.78) Indicates Pin #1 side .240 (6.09) Model 9400 .020 (0.51) J-Lead2 Top View .100 TYP (2.54) .900 .020 (22.86) .700 (17.78) 9400 Series u Small surface mount package (0.225" x 0.550") u Low capacitance (Contact to Shield - 1.1 pF typical) u Coaxial shield for 50 impedance. Excellent for RF and Fast Rise Time Pulse switching (up to 2.0 GHz) NOTE u For RF Graph Performance, see "RF Graphs" section of the Reed Relay Technical & Application Information 07082013 tel: (401) 943.2686 | fax: (401) 942.0920 MODEL NUMBER Parameters Test Conditions Units 9301 9401 9402 1 Form A 1 Form A 1 Form A 50 Coaxial COIL SPECS. Nom. Coil Voltage VDC 5 12 5 12 5 12 Max. Coil Voltage VDC 6.5 15.0 6.2 15.0 6.2 15.0 +/- 10%, 25 C 350 1000 200 825 200 825 Operate Voltage Must Operate by VDC - Max. 3.75 9.0 3.75 9.0 3.75 9.0 Release Voltage Must Release by VDC - Min. 0.4 1.0 0.4 1.0 0.4 1.0 Coil Resistance CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 200 200 200 Switching Current Max DC/Peak AC Resist. Amps 0.5 0.5 0.5 Carry Current Max DC/Peak AC Resist. Amps 1.5 1 1 Contact Rating Max DC/Peak AC Resist. Watts 15 10 10 Life Expectancy-Typical1 Signal Level 1.0V, 10mA x 106 Ops. 250 250 250 Static Contact Resistance (max. init.) 50mV, 10mA 0.150 0.125 0.125 Dynamic Contact Resistance (max. init.) 0.5V, 50mA at 100 Hz, 1.5 msec 0.200 0.150 0.150 Insulation Resistance (minimum) Between all Isolated Pins at 100V, 25C, 40% RH 1012 1012 1012 Capacitance - Typical Across Open Contacts No Shield Shield Floating Shield Guarding pF pF pF 0.7 - 0.2 - 0.4 0.1 Open Contact to Coil No Shield Shield Floating Shield Guarding pF pF pF 1.4 - 1.1 - 1.1 0.1 Contacts Open, Shield Floating pF - Dielectric Strength (minimum) Between Contacts Contacts to Shield Contacts/Shield to Coil Operate Time - including bounce - Typical At Nominal Coil Voltage, 30 Hz Square Wave RELAY SPECIFICATIONS Contact to Shield Release Time - Typical - 1.1 VDC/peak AC VDC/peak AC VDC/peak AC 3 500 1500 300 1500 300 1500 1500 msec. 0.40 0.40 0.40 0.20 0.20 2 0.10 4 2 4 2 6 4 1 3 1 3 1 5 3 msec. Top View: Dot stamped on top of relay refers to pin #1 location Notes: 1 2 3 Consult factory for life expectancy at other switching loads. Surface mount component processing temperature: 500F / 260C max for 1 minute dwell time. Temperature measured on leads where lead exits molded package. Higher dielectric strength available, consult factory. Environmental Ratings: Storage Temp: -35C to +100C; Operating Temp: -20C to +85C All electrical parameters measured at 25C unless otherwise specified. Vibration: 20 G's to 2000 Hz; Shock: 50 G's 07082013 For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC.