Product specification - Apr 25, 2007 V.3 Supersedes Date of Mar. 06, 2003 DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0201 RoHS compliant 5%, 1% Product specification Chip Resistor Surface Mount RC SCOPE ORDERING INFORMATION - 12NC & GLOBAL CLEAR TEXT CODE This specification describes RC0201 series chip resistors with lead-free terminations made by thick film process. Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. YAGEO BRAND ordering code GLOBAL CTC APPLICATIONS All general purpose application FEATURES RoHS compliant Reducing environmentally hazardous wastes High component and equipment reliability Saving of PCB space Products with lead free terminations meet RoHS requirements. None of the forbidden materials are used in products / production. The Pb-glass contained in electrodes, resistor element and glass is exempted by RoHS. 2 9 0201 (RoHS Compliant) SERIES RC0201 CODE X R - XX XXXX L (1) (2) (3) (4) (5) (6) (1) TOLERANCE F = 1% J = 5% (for Jumper ordering, use code of J) (2) PACKAGING TYPE R = Paper taping reel (3) TEMPERATURE COEFFICIENT OF RESISTANCE - = Base on spec (4) TAPING REEL 07 = 7 inch dia. Reel 10 = 10 inch dia. Reel 13 = 13 inch dia. Reel (5) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed resistance rules show in table of "Resistance rule of global CTC". (6) OPTIONAL CODE L = optional symbol (Note) Resistance rule of global CTC Resistance code rule Example D1 D1 = Dummy 0R 0R = Jumper XRXX (1 to 9.76 ) 1R = 1 1R5 = 1.5 9R76 = 9.76 XXRX (10 to 97.6 ) 10R = 10 97R6 = 97.6 XXXR (100 to 976 ) 100R = 100 XKXX (1 to 9.76 K) 1K = 1,000 9K76 = 9760 XMXX (1 to 9.76 M) 1M = 1,000,000 9M76= 9,760,000 ORDERING EXAMPLE The ordering code of a RC0201 chip resistor, value 56 X with 1% tolerance, supplied in 7-inch tape reel is: RC0201FR-0756R(L). NOTE 1. All our RSMD products meet RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of CTC / 12NC can be added (both are on customer request) www.yageo.com Apr 25, 2007 V.3 Product specification Chip Resistor Surface Mount RC SERIES 3 9 0201 (RoHS Compliant) PHYCOMP BRAND ordering codes Both 12NC (traditional) and Global CTC (preferred) codes are acceptable to order Phycomp brand products. 12NC CODE 2322 XXX XXXXX L (1) (2) (3) Last digit of 12NC Resistance decade (3) (4) Last digit 0.01 to 0.0976 X 0.1 to 0.976 X 0 1 to 9.76 X 8 10 to 97.6 X 9 100 to 976 X 1 1 to 9.76 KX 2 10 to 97.6 KX (1) The resistors have a 12-digit ordering code starting with 2322. 3 100 to 976 KX 4 (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. 1 to 9.76 MX 5 10 to 97.6 MX 6 PAPER / PE TAPE ON REEL (units) (2) TYPE/ START 0201 IN (1) TOL. RESISTANCE (%) RANGE 10,000 RC41 2322 5% 1 to 1 M 803 70xxx 806 80xxx 803 60xxx RC42 2322 1% 1 to 1 M 806 7xxxx 806 8xxxx 806 6xxxx Jumper 2322 - 0 803 91001 --- --- Dummy 2322 - - 803 93001 --- --- 20,000 50,000 (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of "Last digit of 12NC". (4) "L" is optional symbol (Note) . ORDERING EXAMPLE The ordering code of a RC42 resistor, value 56 X with 1% tolerance, supplied in tape of 10,000 units per reel is: 232280675609(L) or RC0201FR-0756R(L). GLOBAL CTC Example: 7 0.02 X = 0200 or 200 0.3 X = 3007 or 307 1X = 1008 or 108 33 KX = 3303 or 333 10 MX = 1006 or 106 CODE ( PREFERRED ) For detailed information of global CTC code and ordering example, please refer to page 2. NOTE 1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of CTC / 12NC can be added (both are on customer request) www.yageo.com Apr 25, 2007 V.3 Product specification Chip Resistor Surface Mount RC SERIES 4 9 0201 (RoHS Compliant) MARKING RC0201 No marking ynsc007 Fig. 1 For further marking information, please see special data sheet "Chip resistors marking". CONSTRUCTION The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environment influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Nibarrier) are added. See fig.2 OUTLINES For dimension see Table 1 overcoat Primary glass layer resistive layer (Jumper chip is a conductor) inner electrode H termination(Ni/matte tin) ceramic substrate I2 overcoat I1 W YNSC056 DIMENSIONS Table 1 TYPE L RC0201 L (mm) 0.60 0.03 W (mm) 0.30 0.03 H (mm) 0.23 0.03 I1 (mm) 0.10 0.05 I2 (mm) 0.15 0.05 Fig. 2 Chip resistor outlines www.yageo.com Apr 25, 2007 V.3 Product specification Chip Resistor Surface Mount RC SERIES 0201 (RoHS Compliant) ELECTRICAL CHARACTERISTICS 5 9 FOOTPRINT AND SOLDERING PROFILES Table 2 RC0201 1/20 W CHARACTERISTICS Operating Temperature Range -55 C to +125 C Maximum Working Voltage 25 V Maximum Overload Voltage 50 V Dielectric Withstanding Voltage 50 V For recommended footprint and soldering profiles, please see the special data sheet "Chip resistors mounting". 5% (E24) 1 to 10 M Resistance Range 1% (E24/E96) 1 to 1 M Zero Ohm Jumper < 0.05 Temperature Coefficient 1 R 10 -100/+350 ppm/C 10< R 10 M 200 ppm/C Rated Current 0.5 A Maximum Current 1.0 A Jumper Criteria PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PRODUCT TYPE PACKING STYLE REEL DIMENSION QUANTITY PER REEL RC0201 Paper Taping Reel (R) 7" (178 mm) 10,000 units 10" (254 mm) 20,000 units 13" (330 mm) 50,000 units NOTE 1. For Paper tape and reel specification/dimensions, please see the special data sheet "Packing" document. www.yageo.com Apr 25, 2007 V.3 Product specification Chip Resistor Surface Mount RC SERIES 6 9 0201 (RoHS Compliant) FUNCTIONAL DESCRIPTION POWER RATING RC0201 rated power at 70C is 1/20 W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V=(P X R) or max. working voltage whichever is less handbook, halfpage P MLB206 (%Prated ) 100 50 0 55 0 50 70 100 125 o Tamb ( C) Where V=Continuous rated DC or AC (rms) working voltage (V) Fig. 4 Maximum dissipation (P) in percentage of rated power as a function of the operating ambient temperature (Tamb) P=Rated power (W) R=Resistance value (X) www.yageo.com Apr 25, 2007 V.3 Product specification Chip Resistor Surface Mount RC SERIES 7 9 0201 (RoHS Compliant) TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Life/ Operational Life/ Endurance MIL-STD-202G-method 108A 1,000 hours at 705 C applied RCWV 1.5 hours on, 0.5 hour off, still air required (2%+0.05 ) <100 m for Jumper High Temperature Exposure/ Endurance at upper category temperature MIL-STD-202G-method 108A IEC 60115-1 4.25.3 1,000 hours at maximum operating temperature depending on specification, unpowered (1%+0.05 ) <50 m for Jumper JIS C 5202-7.11 No direct impingement of forced air to the parts Moisture Resistance MIL-STD-202G-method 106F IEC 60115-1 4.24.2 IEC 60115-1 4.25.1 JIS C 5202-7.10 Tolerances: 1253 C Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25 C / 65 C 95% R.H, without steps 7a & 7b, unpowered (2%+0.05 ) <100 m for Jumper Parts mounted on test-boards, without condensation on parts Measurement at 242 hours after test conclusion Thermal Shock Short time overload MIL-STD-202G-method 107G MIL-R-55342D-para 4.7.5 IEC60115-1 4.13 -55/+125 C Note: Number of cycles required is 300. Devices unmounted (0.5%+0.05) for 10 K to 10 M Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air - Air <50 m for Jumper 2.5 times RCWV or maximum overload voltage whichever is less for 5 sec at room temperature (1%+0.05) for others (2%+0.05) <50m for Jumper No visible damage Board Flex/ Bending IEC60115-1 4.33 Device mounted on PCBoard as described, only 1 board bending required 3 mm bending Bending time: 605 seconds Ohmic value checked during bending (1%+0.05) <50m for Jumper No visible damage www.yageo.com Apr 25, 2007 V.3 Product specification Chip Resistor Surface Mount RC SERIES TEST TEST METHOD Solderability - Wetting IPC/JEDECJ-STD-002B test B SMD conditions: IEC 60068-2-58 1st step: method B, aging 4 hours at 155C dry heat 8 9 0201 (RoHS Compliant) PROCEDURE REQUIREMENTS Electrical Test not required. Magnification 50X. Well tinned (95% covered) No visible damage 2nd step: leadfree solder bath at 2453C Dipping time: 30.5 seconds - Leaching IPC/JEDECJ-STD-002B test D IEC 60068-2-58 - Resistance to Soldering Heat MIL-STD-202G-method 210F IEC 60068-2-58 Leadfree solder, 260 C, 30 seconds immersion time No visible damage Condition B, no pre-heat of samples. Leadfree solder, 270 C, 10 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol (1%+0.05) <50m for Jumper No visible damage www.yageo.com Apr 25, 2007 V.3 Product specification Chip Resistor Surface Mount RC SERIES 0201 (RoHS Compliant) 9 9 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 3 Apr 25, 2007 - - New datasheet for 0201 thick film 1% and 5% with lead-free terminations - Replace the 0201 part of pdf files: Pu-RC0201_51_PbFree_L_2 and YuRC0201_51_PbFree_L_2 - Max. working voltage, resistance rage, and TCR updated - Tests and Requirements updated Version 2 Sep 03, 2004 - - New datasheet for 0201 thick film 1% and 5% with lead-free terminations - Replace the 0201 part of pdf files: RC41_5_4, RC42_1_1 - Test method and procedure updated - PE tape added (paper tape will be replaced by PE tape) " Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN." www.yageo.com Apr 25, 2007 V.3