SOLI-D SERIES TECHNICAL CHARACTERISTICS
MATERIALS AND FINISHES:
Insulator: Glass filled nylon resin, UL 94V-0, black
color.
Contacts: Precision machined copper alloy.
Contact Plating: Professional performance - gold flash over
nickel plate. Other finishes available upon
request.
Shells: Steel or brass with tin plate; zinc plate with
chromate seal, stainless steel passivated.
Other materials and finishes available
upon request.
Mounting Spacers: Nylon; copper alloy or steel with zinc
plate and chromate seal or tin plate;
phosphor bronze with tin plate; stainless
steel, passivated.
Push-On Fasteners: Phosphor bronze with tin plate.
Jackscrew Systems: Brass or steel with zinc plate and chromate
seal or clear zinc plate or tin plate; stain-
less steel, passivated.
Vibration Lock Systems: Slide lock and lock tabs, steel with nickel
plate.
Hoods: Composite and plastic, UL 94V-0; brass or
steel with zinc plate and chromate seal;
aluminum or aluminum with electroless
nickel plate; die cast zinc.
Non-magnetic versions are available, contact Technical Sales.
CLIMATIC CHARACTERISTICS:
Temperature Range: -55°C to +125°C.
Damp Heat, Steady State: 10 days.
MECHANICAL CHARACTERISTICS:
Removable Contacts: Insert contact to rear face of insulator and
release from rear face of insulator. Size 20
contacts, male - 0.040 inch [1.02mm] mat-
ing diameter. Female - Robi-D contact
open entry design.
Contact Retention
In Insulator: 6 lbs. [27 N].
Contact Terminations: Closed barrel crimp, wire sizes 18 AWG
[1.0mm2] through 32 AWG [0.03mm2].
Straight printed board mount terminations.
Shells: Male shells may be dimpled for EMI/ESD
ground paths.
Polarization: Trapezoidally shaped shells and polar-
ized jackscrews.
Printed Board Mount: Rapid installation push-on fasteners.
Locking Systems: Jackscrews and vibration locking
systems.
Mechanical Operations: 500 operations minimum per IEC
60512-5.
ELECTRICAL CHARACTERISTICS:
Contact Current Rating: 7.5 amperes nominal.
Initial Contact Resistance: 0.008 ohms maximum.
Proof Voltage: 1000 V r.m.s.
Insulator Resistance: 5 G ohms.
Clearance and Creepage
Distance [minimum]: 0.039 inch [1.0mm].
Working Voltage: 300 V r.m.s.
21 DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
SD SERIES
D-Sub
Positronic Industries
connectpositronic.com
PROFESSIONAL QUALITY
REMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
Size 20 Contacts,
Removable
IEC Publication 60807-3
Performance Level Two
U.L. Recognized CSA Recognized
File #E49351 File #LR54219
Telecommunication
U.L. File #14098
Soli-D series connectors are professional quality connectors rec-
ommended for use in sheltered, non-corrosive indoor or outdoor
environments having normal ventilation, but without temperature or
humidity controls. This crimp removable contact connector will meet
the Performance Level Two requirements of IEC 60807-3.
Soli-D series connectors utilize precision machined contacts
with closed barrel, crimp terminations. The female contact fea-
tures the Robi-Contact open entry design. Other contact termina-
tions such as solder cup and printed board terminations are also
available. The removable contact feature provides for rapid
assembly and permits contact repairs or wiring changes.
Five standard contact variants are offered in arrangements of 9,
15, 25, 37 and 50 contacts. Soli-D series connectors are mate-
able and compatible with all D-subminiature connectors conform-
ing to IEC 60807-2, IEC 60807-3 and MIL-DTL-24308.
A wide assortment of cable support hoods and locking systems
is available from stock.