CL-L253E-MC7W1-C - Citizen - Datasheet.Directory

1/10

1. Scope of Application

These specifications are applied to the chip type LED lamp , model CL-L253E-MC7W1-C.

2. Part code

C L - L 2 5 3 E - M C 7 W 1 - C

C L - L 2 5 3 E - M C 7 W 1 - CC L - L 2 5 3 E - M C 7 W 1 - C

C L - L 2 5 3 E - M C 7 W 1 - C

Series

L253E : White power LED for general lighting.

Special specifications

M : General Color Rendering Index Typ. 85 Type.

Watt class

C7 : 7 watt package.

Lighting color

W1 : Compliance with ANSI C78.377-2008,

3-Step MacAdam ellipse,

Correlated Color Temperature 4000K

Symbol

CITILED

Name CL-L253E-MC7L1-C

DATA SHEET

CITIZEN ELECTRONICS CO.,LTD. JAPAN

Ref.CE-P989 03/11

2/10

3. Outline drawing

4. Performance

( 1 ) Absolute Maximum Rating

Symbol Unit

Power Dissipation P

Forward Current I

Forward Pulse Current I

mA *1

Reverse Current I

Operating Temperature T

Storage Temperature T

Junction Temperature Tj

Max

C*2

*1 Forward Current : Duty<=1/10 , Pulse Width<=10msec

*2 D.C. Current : Tj = Tc + Rj-c × P

Pulse Current : Tj = Tc + Rj-c × Pw(Power Dissipation / one-Pulse) × Duty

Symbol

Parameter Rating Value

10.4

490

CITILED

Name CL-L253E-MC7L1-C

700

-30 ~ +85

150

-40 ~ +100

DATA SHEET

CITIZEN ELECTRONICS CO.,LTD. JAPAN

Anode

Cathode

Resin

（Tc Measurement Point）

Cathode Mark

Marking　1

Marking　2

It has a protection device built in as a

protection circuit against static electricity.

Unit : mm

Tolerances unless otherwise specified : ±0.3

Protection

device

AnodeCathode

Marking 1 : Serial No.

Marking 2 :E M 7 W 1 C

Color

Watt

7 : 7W

M : typ.85

Ref.CE-P989 03/11

3/10

( 2 ) Electro-optical Characteristics

( Tc=25 C )

Symbol

Condition

Min.

Typ.

Max.

Unit

=420mA

17.5 18.6 21.0 V

Φv

IF=420mA

542 603 - lm

IF=420mA

82 (85) - -

Rj-c

Junction-case

- (3.0) - C/W

Chromaticity coordinates ( Condition : I

=420mA ,Tc=25 C )

Note: The tolerance of measurement at our tester is V

±3% , Φv±10% , Chromaticity(x,y)±0.005.

and Ra+/- 2.

Symbol

CITILED

Name CL-L253E-MC7L1-C

DATA SHEET

Parameter

Forward Voltage

Luminous Flux

General Color

Rendering Index

Thermal Resistance

CITIZEN ELECTRONICS CO.,LTD. JAPAN

Reference　(ANSI C78.377)

x y x y

0.3818 0.3797 Center 0.3818 0.3797 (3985K)

a 0.4006 0.4044

a 0.00939 b 0.3736 0.3874

b 0.00402 c 0.3670 0.3578

θ° 54.00 d 0.3898 0.3716

*Color region stay within MacAdam "3-step" ellipse from the chromaticity center.

*The chromaticity center refers to ANSI C78.377:2008.

Please refer to ANSI C78.377 for the chromaticity center.

*θ is the angle between the major axis of the ellipse and the x-axis,

　 and a and b are the major and minor semi-axes of an ellipse. (Ref. IEC 60081:1997 AnnexD)

Color rank

Center

Oval parameter

x-y chart-CIE1931

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.36 0.37 0.38 0.39 0.40 0.41

Color region

(ANSI)

3800K

4400K 4000K 3600K

4200K

Ref.CE-P989 03/11

4/10

5. Characteristics

・

Forward Current vs. Forward Voltage

・

Forward Current vs. Relative Luminous Flux

・

Case Temperature vs. Chromaticity Coordinate

Symbol

CITILED

Name CL-L253E-MC7L1-C

DATA SHEET

・Case Temperature vs. Allowable Forward Current

＊

１

CITIZEN ELECTRONICS CO.,LTD. JAPAN

-0.020

-0.015

-0.010

-0.005

0.000

0.005

0.010

0.015

0.020

0 100 200 300 400 500

[mA]

∆x, ∆y

∆x

∆y

15.0

16.0

17.0

18.0

19.0

20.0

21.0

0 100 200 300 400 500

[mA]

[V]

-0.020

-0.015

-0.010

-0.005

0.000

0.005

0.010

0.015

0.020

0 20 40 60 80 100

Tc [C]

∆x, ∆y

∆x

∆y

=420mA

Tc=25C

20%

40%

60%

80%

100%

120%

140%

0 100 200 300 400 500

[mA]

Relative Luminous Flux [a.u.]

Tc=25C

Ref.CE-P989 03/11

5/10

・

Case Temperature vs. Forward Voltage

・

Case Temperature vs. Relative Luminous Flux

・

Spectrum

Symbol

DATA SHEET

・

Case Temperature vs. Allowable Forward Current

CITILED

Name CL-L253E-MC7L1-C

CITIZEN ELECTRONICS CO.,LTD. JAPAN

15.0

16.0

17.0

18.0

19.0

20.0

21.0

0 20 40 60 80 100

Tc [C]

Ｖ

Ｆ

[V]

20%

40%

60%

80%

100%

120%

0 20 40 60 80 100

Tc [C]

Relative Luminous Flux [a.u.]

20%

40%

60%

80%

100%

120%

350 450 550 650 750 850

λ [nm]

Relative Emission Intensity [a.u.]

100

200

300

400

500

0 25 50 75 100 125 150

Tc [C]

[mA]

=420mA I

=420mA

Tc=25C,I

=420mA

Ref.CE-P989 03/11

6/10

6. Reliability

(1) Details of the tests

(2) Judgment Criteria of Failure for Reliability Test (Ta=25 C)

Symbol

Φv

U defines the upper limit of the specified characteristics. S defines the initial value.

CL-L251-MC4L reliability test results will be used for CL-L253E-MC7W1-C.

Symbol

Measuring Item

Moisture-proof Test 60 C, 90 %RH for 1000 hours

Continuous Operation Test

Test Item

Thermal Shock Test

Measuring Condition

Test Condition

DATA SHEET

Low Temperature Storage Test

Ta=25 C,I

=480 mA× 1000 hours(with Al-fin)

Ta=50 C,I

=480 mA× 1000 hours(with Al-fin)

High Temperature Storage Test

100 C × 1000 hours

returned to the normal ambient conditions after the completion of each test.

=480mA

Forward Voltage

< S × 0.85

-40 C × 30 minutes – 100 C × 30 minutes, 100 cycle

Judgment Criteria for Failure

Note: Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be

Total Luminous Flux

CITILED

Name CL-L253E-MC7L1-C

-40 C × 1000 hours

> U × 1.1

=480mA

CITIZEN ELECTRONICS CO.,LTD. JAPAN

Ref.CE-P989 03/11

7/10

7. Packing Specifications

(1) Packing

An empty tray is placed on top of a five-tier tray which contain 48 pieces each. The set of six

trays is banded together with two rubber bands.

(Smallest packing unit: 240 pieces)

A label with product name, quantity, lot number is placed on the upper empty tray.

Tray (Dimensions: 310 × 210 × 14.6mm / Materials: Electrically conductive PS)

Symbol

DATA SHEET

CITIZEN ELECTRONICS CO.,LTD. JAPAN

CITILED

Name CL-L253E-MC7L1-C

< Packing figure >

Product 50pcs/tray

310

210

14.6

Product 48pcs/tray

< Example of indication label >

1. TYPE e.g. CL-L253E-MC7W1-C

2. P.No. (Cutomer's P/N) e.g. xxx

3. Lot No. e.g. 03D001

- First letter: Last digit of the year e.g. 0 : year 2010

- Second letter: Production month e.g. 3 : Mar

Note: October, November and December are designated

by X, Y and Z, respectively.

- Third letter: CE's control number e.g. D001

4. Quantity e.g. 240 pieces

CUSTOMER

PASS

CITIZEN ELECTRONICS

TYPE

P.NO

LOTNo

Q'ty

CL-L253E-MC7W1-C

xxx

03D001

240pcs.

---(1)

---(2)

---(3)

---(4)

Ref.CE-P989 03/11

8/10

8. Precautions

1. Avoid the application of any stress to the lens portion.

2. Avoid any contact by a sharp metal nail or other materials with the lens portion.

3. This product should be secured firmly by fastening an M3 screw on both sides of the product.

Please be careful not to apply any stress to the product during the clamping operation.

please check thoroughly.

4. Insulation between the terminal section and the heat sink section of the LED is not covered

by warranty. With regard to insulation after this product has been assembled in an apparatus,

preventive action should be carried out by the customer.

5. For fixing this product to the outer heat sink, heat grease should be applied to the whole rear

surface so that the product can dissipate heat as a whole. Please pay attention to avoid product

deformation when conducting the clamping operation with heat grease in sheet form.

6. Handling of static electricity

- These products are sensitive to static electricity charge.

Please take measures to prevent any static electricity being produced such as the wearing of a

wristband or anti-static gloves when handling this product.

- All devices, equipment and machinery must be properly grounded. It is recommended that precautions

be taken against surge voltage to the equipment that mounts the LEDs.

- ESD sensitivity of this product is 1000V (HBM, based on JEITA ED-4701/304).

- When inspecting the final products in which LEDs were assembled, it is recommended to check

whether the assembled LEDs are damaged by static electricity or not.

- It is easy to find static-damaged LEDs by a light-on test.

<Light-on test criterion>

Symbol

CITILED

Name CL-L253E-MC7L1-C

Condition

DATA SHEET

Judgmental criterion

=7mA/PKG

No-lighting in entire block making

up parallel circuit is unacceptable

As the connection status could vary depending on materials of outer heat sink,

CITIZEN ELECTRONICS CO.,LTD. JAPAN

Resin portion (Shaded area)

Thermal conduction materials

(Insulation)

Outer heart sink

Spring Washer (≦φ6mm)

M3screw (Insulation)

Plane washer (≦φ6mm)

L251 consists of seven blocks.

13.08 mm

12.64 mm

Ref.CE-P989 03/11

9/10

8. Precautions (continued)

Symbol

- As this product is designed with consideration of the heat release property of module,

a heat release design is required to use this product efficiently.

DATA SHEET

- Factors responsible for an increase in temperature include heat generation attributed to

Please ensure that heat generation is not in excess of the absolute maximum rating.

(Refer to 4-1 Performance)

8. Please be aware that this product should not come into contact with any other parts

in assembled status.

7. Lighting at a low current

A minimum current value of lighting of all dice is 35mA.

When a minimum current is applied, LED dice may look different in their brightness due to

350°C or less within 3.5 seconds for one land.

(Recommended condition in a case of lead-free solder condition)

- No external force shall be applied to resin part during soldering.

- For soldering correction

- Regarding soldering correction, above conditions shall be used.

12. Other

- This product complies with RoHS directives.

- Contacts number of soldering bit should be within twice for each terminal as a correction.

* Citizen Electronics cannot guarantee if usage exceeds this recommended conditions.

Please use it after sufficient verification is carried out on your own risk if necessary.

the individual difference of the LED element, and it is not a failed product.

10. Heat generation

- Manual soldering

ambient temperature conditions or power dissipation. Thus, drive conditions should be

11. Recommended soldering condition (This product is not adaptable to reflow process)

9. Drive circuit

taken into consideration, depending on ambient temperature (Ta).

- Soldering shall be implemented using a soldering bit of 40W or less with a temperature

CITILED

Name CL-L253E-MC7L1-C

- Next process of soldering should be carried out after the product has returned to ambient

- A constant current circuit is recommended as a drive circuit.

And when two or more LED packages are connected, the series connection

between each package is recommended.

- Please design a circuit that prevents any reverse voltage (excess current) from being

applied to this product instantaneously when the circuit is ON or OFF.

CITIZEN ELECTRONICS CO.,LTD. JAPAN

Ref.CE-P989 03/11

10/10

Such information, however, is subject to change without any prior notice.

included in this document,

business interruption and loss of data, and disclaims any and all express or implied warranties

and for providing adequate designs and safeguards to minimize risk and avoid situations

Symbol

DATA SHEET

CITIZEN ELECTRONICS CO.,LTD. JAPAN

9. Precautions with regard to product use

please confirm the latest product information with a CITIZEN ELECTRONICS' sales office,

and formal specifications must be exchanged and signed by both parties prior to mass production.

products are used as intended. CITIZEN ELECTRONICS neither makes warranties or

representations with respect to the accuracy or completeness of the information contained

in this document nor grants any license to any intellectual property rights or any other

1. This document is provided for reference purposes only so that CITIZEN ELECTRONICS'

a result of errors or omissions in the information included in this document.

but CITIZEN ELECTRONICS assumes no liability whatsoever for any damages incurred as

rights of CITIZEN ELECTRONICS or any third party with respect to the information

Before purchasing or using any CITIZEN ELECTRONICS' products listed in this document,

in this document.

2. All information included in this document such as product data, diagrams, charts,

is current as of the date this document is issued.

3. CITIZEN ELECTRONICS has used reasonable care in compiling the information

4. Absent

ａ

written signed agreement, except as provided in the relevant terms and conditions of

or conditions of merchantability, fitness for a particular purpose, accuracy of information,

and conditions related to sale, use of product, or information, including warranties

or no infringement.

CITILED

Name CL-L253E-MC7L1-C

in which a malfunction or failure of a product could cause loss of human life,

5. Though CITIZEN ELECTRONICS works continually to improve products' quality and reliability,

sale for product, and to the maximum extent allowable by law, CITIZEN ELECTRONICS

assumes no liability whatsoever, including without limitation, indirect, consequential, special,

or incidental damages or loss, including without limitation, loss of profits, loss of opportunities,

6. Please contact CITIZEN ELECTRONICS' sales office if you have any questions regarding

the information contained in this document, or if you have any other inquiries.

products can malfunction or fail. Customers are responsible for complying with safety standards

CITIZEN ELECTRONICS assumes no liability for customers' product design or applications.

bodily injury or damage to property, including data loss or corruption.

In addition, customers are also responsible for determining the appropriateness of

use of any information contained in this document such as application cases not only with

evaluating by their own but also by the entire system.

Ref.CE-P989 03/11