REVISION P MEC1-1XX-XX-XX-D-EMX-XX No OF POSITIONS -05, -08, -20, -30, -40, -50, -60 & -70 (PER ROW) CARD SLOT THICKNESS -02: .062 THICK CARD (USE MEC1-XX-S-D-EMX-X) (SEE TABLE 1) DO NOT SCALE FROM THIS PRINT ((No OF POS + 2) x .03937[1.0000]) + .490[12.45] REF EDGE MOUNT OPTION PLATING -EM1: .031 THICK PCB -F: FLASH GOLD -EM2: .062 THICK PCB (USE C-150-07-F-P) (SEE TABLE 3) -L: LIGHT SELECTIVE GOLD ROW SPECIFICATION (USE C-150-07-L-P) "A" REF -D: DOUBLE -S: SELECTIVE GOLD (USE MEC1-XX-X-D-EMX-X) (USE C-150-07-S-P) -FM: FLASH GOLD SELECTIVE, MATTE TIN TAIL (USE C-150-07-F-P) -LM: LIGHT SELECTIVE GOLD, MATTE TIN TAIL (USE C-150-07-L-P) * NOT ENGINEERING APPROVED -SM: SELECTIVE GOLD, MATTE TIN TAIL (USE C-150-07-S-P) C .021 0.53 C MEC1-XX-X-D-EMX-X .005 [.13] "G" .003 [.08] ((No OF POS + 2) x .03937[1.0000]) + .100[2.54] REF 02 .2680 6.81 REF 01 .0400 1.02 REF .0500 1.27 REF 'A' (No OF POS + 2) x .03937[1.000] REF [BREAKOUT VIEW] OPTIONS -NP: NO POLARIZED POSITION (USE MEC1-XX-X-D-EMX-N) (ONLY AVAILABLE ON -05, -08, -20 & -30 POSITIONS) -TR: ( SEE PAGE 2 -TR PACKAGE VIEW, NOT AVAILABLE FOR -60 OR -70 POS.) -BLANK: BODY IS POLARIZED "A" .1690 4.29 REF .3500 8.89 REF .1850 4.70 REF .100.010 2.540.25 REF "D" .010 (SEE NOTE 5) C "A" "C" REF .0394 1.000 (TYP) "F" .006[.015] (TYP) 'B' 2 MAX SWAY (No OF POS -1) x .03937[1.0000] .3200 8.13 REF C-150-07-XX-P "E" .0140 0.36 REF "B" .007 (SEE NOTE 5) 2 MAX SWAY (No OF POS x .03937[1.0000]) + .389[9.87] REF C SECTION "A"-"A" [SEE CONTACT IN-PROCESS VIEW] .0300 0.76 REF DETAIL 'A' SCALE 6 : 1 .1800 4.57 REF (TYP) NOTES: 1. C REPRESENTS A CRITICAL DIMENSION. 2. BURR ALLOWANCE: .0015[.038] MAX. 3. MINIMUM PUSHOUT FORCE: .5 LB. 4. DELETED. 5. .020[.51] MAX VARIATION ON ONE PART. 6. .0040[.102] MAX ALLOWABLE BURR ON TAILS. 7. DELETED. 8. .0050[.127] MAX BARB PROTRUSION BELOW BODY. 9. PART TO BE TRAY PACKAGED USING TRAY-XX-01. .1238 3.14 REF .0400 1.02 REF UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS ANGLES .XX: .01 [.3] 2 .XXX: .005 [.13] .XXXX: .0020 [.051] MATERIAL: PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 1.75:1 INSULATOR: LCP, COLOR: BLACK CONTACT: PHOS BRONZE F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-EMX-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 code: 55322 e-Mail: info@SAMTEC.com DESCRIPTION: 1mm MINI-EDGE, EDGE MOUNT ASSEMBLY DWG. NO. MEC1-1XX-XX-XX-D-EMX-XX BY: KEVIN B 5/19/2000 SHEET 1 OF 3 REVISION P CONTACT IN-PROCESS FORM [-EM2] C .9449 24.00 REF [-EM1] C .0720 1.83 .0875 2.22 2.8346 72.00 REF R.0570 1.45 L R.0570 1.45 .1000 2.54 L .1100 2.79 105 105 R.0200 0.51 CARRIER R.0270 0.69 R.0270 0.69 CARRIER USER DIRECTION OF UNREELING POCKET NOT DETAILED - TR PACKAGING VIEW MEC1-130-02-*-D-EM2-TR SHOWN PACKAGING VIEW C [PARTS TO HAVE POSITION #1 LOADED IN SAME DIRECTION FOR ALL PARTS] .0050 0.13 MAX (SEE NOTE 8) DETAIL 'B' SCALE 7 : 1 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 1.75:1 F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-EMX-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 code: 55322 e-Mail: info@SAMTEC.com DESCRIPTION: 1mm MINI-EDGE, EDGE MOUNT ASSEMBLY DWG. NO. MEC1-1XX-XX-XX-D-EMX-XX BY: KEVIN B 5/19/2000 SHEET 2 OF 3 REVISION P CARD SOLDER PAD .1510 3.84 REF .0550 1.40 REF .0480 1.22 REF .0300 0.76 REF SOLDER PAD PCB BOARD APPLICATION VIEW PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 1.75:1 F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-EMX-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 code: 55322 e-Mail: info@SAMTEC.com DESCRIPTION: 1mm MINI-EDGE, EDGE MOUNT ASSEMBLY DWG. NO. MEC1-1XX-XX-XX-D-EMX-XX BY: KEVIN B 5/19/2000 SHEET 3 OF 3