Advanced Monolithic Systems AMSOP-07 LOW OFFSET VOLTAGE OPERATIONAL AMPLIFIER FEATURES APPLICATIONS * Low VOS.............................................. 75 V Max * Low VOS Drift................................... 1.3 V/C Max * Ultra Stable with Time.................. 1.5 V/Month Max * Low Noise .........................................0.6 VP-P Max * Wide Input Voltage Range ............................. 14V * Wide Supply Voltage Range .................. 3V to 18V * High-Gain Instrumentation * Precision Data Acquisition * Precision Integrators * Precision Threshold Detectors * Biomedical Amplifiers GENERAL DESCRIPTION The AMSOP-07 is a precision operational amplifier with a very low input offset voltage. This device features a wide input voltage range of 13V minimum, low input bias current, high impedance, high CMRR, excellent stability of offsets and gain over time and temperature. Excellent linearity can be maintained even at high closed-loop gains. Low cost, low noise, low offsets and high open-loop gain make the AMSOP-07 an excellent choice particularly for high-gain instrumentation applications. Other applications include precision data acquisition, precision integrators, threshold detectors and medical instrumentation. The AMSOP-07 is operational in the full industrial temperature range of -40C to 85C and is available in the 8 lead SOIC and plastic dip (PDIP) packages. ORDERING INFORMATION: TOL. PACKAGE TYPE 8 LEAD SOIC 75V AMSOP-07ES 150V AMSOP-07CS 150V AMSOP-07DS 8 LEAD PDIP AMSOP-07EP AMSOP-07CP AMSOP-07DP OPERATING TEMPERATURE RANGE -40 to 85 C -40 to 85 C -40 to 85 C PIN CONNECTIONS 8 Lead SOIC/ 8Lead PDIP VOS TRIM 1 8 VOS TRIM -IN 2 7 V+ +IN 3 6 OUT V- 4 5 N/C Top View Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMSOP-07 ABSOLUTE MAXIMUM RATINGS (Note1) Supply Voltage Differential Input Voltage Input Voltage Output Short Circuit Duration Operating Temperature Range 22V 30V 22V Indefinite -40C to 85C Storage temperature Junction Temperature Soldering information (60 sec) Thermal Resistance 8 L SOIC 8 L PDIP -65C to +125C +150C 300C 158C/W 103C/W ELECTRICAL CHARACTERISTICS Electrical Characteristics at VIN =15V and TA = +25C unless otherwise specified. Parameter Conditions AMSOP-07E AMSOP-07 C Min Typ Max Min Typ Max AMSOP-07 D Min Typ Max Units Input Offset Voltage (Note 2) 30 75 60 150 60 150 V Long Term VOS Stability (Note 3) 0.3 1.5 0.4 2.0 0.5 3.0 V/Mo 0.5 3.8 0.8 6.0 0.8 6.0 nA 1.2 4.0 1.8 7.0 2.0 12 nA Input Offset Current Input Bias Current Input Noise Voltage 0.1Hz to 10Hz 0.35 0.6 0.38 0.65 0.38 0.65 VP-P Input Noise Voltage Density fO = 10Hz fO = 100Hz (Note 4) fO = 1000Hz 10.3 10.0 9.6 18.0 13.0 11.0 10.5 10.2 9.8 20.0 13.5 11.5 10.5 10.3 9.8 20.0 13.5 11.5 nV/Hz Input Noise Current 0.1Hz to 10Hz 14 30 15 35 15 35 pAP-P Input Noise CurrentDensity fO = 10Hz fO = 100Hz (Note 4) fO = 1000Hz 0.32 0.14 0.12 0.80 0.23 0.17 0.35 0.15 0.13 0.90 0.27 0.18 0.35 0.15 0.13 0.90 0.27 0.18 pA/Hz Input Resistance Differential-Mode (Note 5) 15 Input Resistance Common-Mode 50 8 160 Input Voltage Range Common-Mode Rejection Ratio VCM = 13 Power Supply Rejection Ratio VS = 13 to 18 Large-Signal Voltage Gain RL2k, VO = 10V RL500, VO = 0.5V, VS = 0.5V (Note 5) Output Voltage Swing RL 10k RL 2k RL 1k Slew Rate 33 7 120 M 120 G 13 14 13 14 13 14 V 106 123 100 120 94 110 dB 5 20 7 32 7 200 150 500 400 120 100 400 400 120 12.5 12.0 10.5 13.0 12.8 12.0 12.0 11.5 13.0 12.8 12.0 12.0 RL 2k (Note 4) 0.1 0.3 0.1 Closed-Loop Bandwidth AVCL =+1 (Note 6) 0.4 0.6 0.4 Open-Loop Output Resistance VO = 0, IO= 0 60 Power Consumption VS = 15V, No Load VS = 3V, No Load 75 4 Offset Adjustment Range RP =20k 4 Advanced Monolithic Systems, Inc. 31 www.advanced-monolithic.com V/V 400 400 V/mV 11.5 13.0 12.8 12.0 V 0.3 0.1 0.3 V/s 0.6 0.4 0.6 MHz 60 60 120 6 32 80 4 150 8 4 Phone (925) 443-0722 80 4 150 8 4 Fax (925) 443-0723 mW mV AMSOP-07 ELECTRICAL CHARACTERISTICS Electrical Characteristics at VIN= 15, at -40C TA +85C unless otherwise specified. Parameter Conditions AMSOP-07E AMSOP-07 C Min Typ Max Min Typ Max AMSOP-07 D Min Typ Max Units Input Offset Voltage (Note 2) 45 130 85 250 85 250 V Average Input Offset Voltage Drift (Note 5) Without External Trim 0.3 1.3 0.5 1.8 0.7 2.5 V/C With External Trim RP =2k 0.3 1.3 0.4 1.6 0.7 2.5 V/C 0.9 5.3 1.6 8.0 1.6 8.0 nA 8 35 12 50 12 50 pA/C 1.5 5.5 2.2 9.0 3.0 14 nA 13 35 18 50 18 50 pA/C Input Offset Current Average Input Offset Current Drift (Note 4) Input Bias Current Average Input Bias Current Drift (Note 4) Input Voltage Range Common-Mode Rejection Ratio VCM = 13 Power Supply Rejection Ratio VS = 13 to 18 Large-Signal Voltage Gain RL2k, VO = 10V Output Voltage Swing RL 2k 13 13.5 13 13.5 13 13.5 V 103 123 97 120 94 106 dB 7 32 10 51 10 180 450 100 400 100 400 12.0 13.0 12.0 13.0 12.0 13.0 V/V 51 V/mV V Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Note 2: Input Offset Voltage measurements are performed by automated test equipment approximately 0.5 seconds after application of power. Note 3: Long-Term Input Offset Voltage Stability refers to the averaged trend line of VOS vs. Time over extended periods after the first 30 days of operation. Excluding the initial hour of operation, changes in VOS during the first 30 operating days are typically 2.5V. Parameter is sample tested. Note 4: Sample tested Note 5: Guaranteed by design. Note 6: Guaranteed but not tested. TYPICAL PERFORMANCE CHARACTERISTICS 25 V = 15V 800 600 400 200 -50 0 50 TEMPERATURE ( C) 100 Advanced Monolithic Systems, Inc. 20 30 = 25 C A V = 15V OP-07C 10 5 OP-07E 0 1 2 3 5 TIME AFTER POWER SUPPLY TURN-ON (minutes) www.advanced-monolithic.com NONINVERTING INPUT BIAS CURRENT (mA) ABSOLUTE CHANGE IN INPUT OFFSET VOLTAGE ( OPEN-LOOP GAIN (V/mV) 1000 0 Input Bias Current vs Differrential Input Voltage Warm-UpDrift AT | VDIFF | 1.0V, | IB | 7nA (OP-07C) -30 20 -20 10 -10 0 0 -10 -20 10 VS = 15V A = 25 C 20 -30 30 -30 -20 -10 0 10 20 30 DIFFERENTIAL INPUT VALUE (V) Phone (925) 443-0722 Fax (925) 443-0723 INVERTING INPUT BIAS Open-Loop Gain vs Temperature AMSOP-07 TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 2.5 3 2 OP-07C OP-07E 1 0 -50 1000 2.0 1.5 1.0 OP-07C 0.5 OP-07E 0 0 50 100 TEMPERATURE ( C) -50 PEAK-TO-PEAK AMPLITUEDE (V) OPEN-LOOP GAIN (dB) VS = 15V TA = 25 C 80 40 0 0 1 10 100 1k 10k 100k 1M 10M FREQUENCY (Hz) 600 400 200 0 0 50 100 TEMPERATURE ( C) 28 VS = 15V TA = 25 C 24 20 16 12 8 4 0 1k 0 5 10 15 20 POWER SUPPLY VOLTAGE (V) Maximum Output Voltage vs Load Resistance 20 15 VS = 15V TA = 25 C VIN = 10mV POSITIVE SWING NEGATIVE SWING 10 1M 10k 100k FREQUENCY (Hz) Output Short-Circuit Current vs Time 5 0 100 1k 10k LOAD RESISTANCE TO GROUND () Untrimmed Offset Voltage vs Temperature 35 85 1. VIN (PIN 3) = -10mV, VO = +15V 2. VIN (PIN 3) = +10mV, VO = -15V 30 1 2 25 2 1 20 VS = 15V TA = 25 C ABSOLUTE VALUE OF OFFSET VOLTAGE (V) OUTPUT SHORT-CIRCUIT CURRENT (mA) 800 Maximum Output Swing vs Frequency Open-Loop Frequency Response 120 TA = 25 C VS = 15V OPEN-LOOP GAIN (V/mV) INPUT OFFSET CURRENT (nA) INPUT BIAS CURRENT (nA) VS = 15V MAXIMUM OUTPUT VOLTAGE (V) 4 -40 Open-Loop Gain vs Power Supply Voltage Input Offset Current vs Temperature Input Bias Current vs Temperature 15 0 1 2 3 4 TIME FROM OUTPUT BEING SHORTED (minutes) Advanced Monolithic Systems, Inc. www.advanced-monolithic.com 75 VS = 15V RS = 100 OP-07C 50 OP-07E 25 0 -50 0 50 TEMPERATURE ( C) Phone (925) 443-0722 100 Fax (925) 443-0723 AMSOP-07 TEST CIRCUITS TYPICAL OFFSET VOLTAGE TEST CIRCUIT TYPICAL LOW-FREQUENCY NOISE TEST CIRCUIT 200k 2.5M V+ 50k 100k OP-07 + VO 2 100k 3 7 + 3.3k 6 OP-07 OUTPUT 4 VOS = VO/4000 4.7F V- (10Hz FILTER) INPUT REFERRED NOISE = VO/25,000 =(5mV/cm)/25,000 = 200nV/cm OPTIONAL OFFSET NULLING CIRCUIT 20k - 2 INPUT + 3 V+ 1 8 - 7 6 OP-07 + OUTPUT 4 V- TYPICAL APPLICATIONS Adjustment Free Precision Summing Amplifier Precision Absolute Value Circuit R4 10k R1 10k E1 E2 E3 R2 10k R3 10k R3 10k R4 10k R5 10k V+ V+ 2 3 7 - 6 OP-07 + EIN EO R1 10k 10V 4 R5 2.5k Advanced Monolithic Systems, Inc. 2 7 OP-07 A1 3 + 4 R2 10k V- www.advanced-monolithic.com FD333 D1 V- V+ 2 6 FD333 D1 7 OP-07 A2 3 + 4 6 V- VA Phone (925) 443-0722 EO 0 TO +10V Fax (925) 443-0723 AMSOP07 PACKAGE DIMENSIONS (millimeters) unless otherwise noted. 8 LEAD SOIC PLASTIC PACKAGE (S) 0.189-0.197* (4.801-5.004) 8 7 6 5 0.228-0.244 (5.791-6.197) 0.150-0.157** (3.810-3.988) 1 2 3 4 0.010-0.020 x 45 (0.254-0.508) 0.053-0.069 (1.346-1.752) 0.004-0.010 (0.101-0.254) 0.014-0.019 (0.355-0.483) 0.008-0.010 (0.203-0.254) 0.050 (1.270) TYP 0-8 TYP 0.016-0.050 (0.406-1.270) S (SO-8 ) AMS DRW# 042293 *DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE **DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE 8 LEAD PLASTIC DIP PACKAGE (P) 0.400* (10.160) MAX 8 7 6 5 1 2 3 4 0.2550.015* (6.4770.381) 0.045-0.065 (1.143-1.651) 0.300-0.325 (7.620-8.255) 0.1300.005 (3.3020.127) 0.065 (1.651) TYP 0.005 (0.127) MIN 0.1000.010 (2.5400.254) 0.125 (3.175) MIN 0.009-0.015 (0.229-0.381) 0.015 (0.380) MIN 0.0180.003 (0.4570.076) 0.325 +0.025 -0.015 (8.255 +0.635 -0.381 ) P (8L PDIP ) AMS DRW# 042294 *DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTUSIONS. MOLD FLASH OR PROTUSIONS SHALL NOT EXCEED 0.010" (0.254mm) Advanced Monolithic Systems, Inc. www.advanced monolithic.com Phone (925) 443- -0723