SS29 & SS210 Vishay General Semiconductor High Voltage Surface Mount Schottky Rectifier FEATURES * Low profile package * Ideal for automated placement * Guardring for overvoltage protection * Low power losses, high efficiency * Low forward voltage drop * High surge capability DO-214AA (SMB) * Meets MSL level 1, per J-STD-020C, LF max peak of 260 C * Solder Dip 260 C, 40 seconds * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC MAJOR RATINGS AND CHARACTERISTICS IF(AV) 1.5 A VRRM 90 V, 100 V IFSM 75 A VF 0.71 V Tj max. 150 C TYPICAL APPLICATIONS For use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications. MECHANICAL DATA Case: DO-214AA (SMB) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Color band denotes the cathode end MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Device marking code SS29 SS210 S9 S10 UNIT Maximum repetitive peak reverse voltage VRRM 90 100 V Maximum RMS voltage VRMS 63 70 V Maximum DC blocking voltage VDC 90 100 V Maximum average forward rectified current (see Fig. 1) IF(AV) 1.5 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 75 A Peak repetitive reverse surge current at tp = 2 s, 1 kHz IRRM 1.0 A dv/dt 10000 V/s TJ, TSTG - 55 to + 150 C Voltage rate of change (rated VR) Operating junction and storage temperature range Document Number 88749 07-Jul-06 www.vishay.com 1 SS29 & SS210 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage at: (1) IF = 0.1 A, IF = 1.0 A, IF = 3.0 A, IF = 1.5 A, IF = 3.0 A, Maximum DC reverse current at rated VR (1) SYMBOL TA = 25 C TA = 25 C TA = 25 C TA = 100 C TA = 100 C TA = 25 C TA = 100 C SS29 SS210 UNIT VF 0.43 0.75 0.95 0.71 0.85 V IR 30 5 A mA Note: (1) Pulse test: 300 s pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL SS29 SS210 RJA RJL Maximum thermal resistance (1) UNIT 85 25 C/W Note: (1) P.C.B. mounted with 0.2 x 0.2" (5.0 x 5.0 mm) copper pad areas ORDERING INFORMATION PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SS210-E3/52T 0.096 52T 750 7" Diameter Plastic Tape & Reel SS210-E3/5BT 0.096 5BT 3200 13" Diameter Plastic Tape & Reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 2 2.5 D = 0.8 Average Power Loss (W) Average Forward Current (A) Resistive or Inductive Load 1.5 1 P.C.B. Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas 0.5 D = 0.5 2.0 D = 0.3 D = 1.0 D = 0.2 1.5 D = 0.1 1.0 T 0.5 D = tp/T tp 0 0 0 25 50 75 100 125 Lead Temperature (C) Figure 1. Forward Current Derating Curve www.vishay.com 2 150 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 Average Forward Current (A) Figure 2. Forward Power Loss Characteristics Document Number 88749 07-Jul-06 SS29 & SS210 Vishay General Semiconductor 10000 Instantaneous Reverse Current (mA) Peak Forward Surge Current (A) 100 75 50 25 0 Tj = 150 C 1000 Tj = 125 C 100 10 Tj = 25 C 1 0.1 1 10 10 100 Number of Cycles at 60 Hz Figure 3. Maximum Non-Repetitive Peak Forward Surge Current 30 40 50 60 70 80 90 100 Figure 5. Typical Reverse Leakage Characteristics 1000 100 Tj = 150 C Junction Capacitance (pF) Instantaneous Forward Current (A) 20 Percent of Rated Peak Reverse Voltage (%) Tj = 125 C 10 Tj = 25 C 1 100 10 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 0.1 1.4 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 4. Typical Instantaneous Forward Characteristics Figure 6. Typical Junction Capacitance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AA (SMB) Mounting Pad Layout Cathode Band 0.085 MAX. (2.159 MAX.) 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.077 (1.95) 0.180 (4.57) 0.160 (4.06) 0.086 MIN. (2.18 MIN.) 0.060 MIN. (1.52 MIN.) 0.012 (0.305) 0.006 (0.152) 0.220 REF 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) Document Number 88749 07-Jul-06 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1