PHP8.4 thru PHP500 and PIP8.4 thru PIP500 HIGH POWER BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION APPEARANCE The PHP and PIP bidirectional Transient Voltage Suppressor (TVS) modules are designed for applications requiring "across the line" ac power protection. They are used where extreme voltage transients can permanently damage voltage-sensitive systems or components. These devices are most often used when discrete TVS components do not have sufficient power requirements to suppress high power surges. These modules can be used to protect equipment from induced lightning, power surges, and transients originating from inductive switching or power interrupt for both commercial and military applications. This includes telecommunications, central office switching and PABX, CATV distribution, aircraft, shipboard, computers, distributed data processing and power supplies. The subassembly components can also be tested or screened for military requirements prior to encapsulation into the complete module. The screening would consist of 100% TX level environmental testing per MIL-PRF-19500/507A (Par. 4.3). For ordering these options, use the following suffix: H1 - Submodule Screening H2 - Submodule and Module Screening H3 - Submodule and Module Screening & Module Group B & C lot testing WWW . Microsemi .C OM DESCRIPTION CASE 11 IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES * * * * APPLICATIONS / BENEFITS Designed for Military (PHP Series) and Commercial (PIP Series) Working rms voltages (VWM(RMS)) available in ranges from 8.4 to 500 Volts For military applications, the PHP module subassemblies are packaged in a hermetically sealed glass-to-metal package and are also optionally screened in accordance with MIL-PRF-19500/507. The PHP series modules can also have design consistency with the following military controlling specifications: * MIL-STD-1399, Section 300 * MIL-STD-704 * MIL-E-16400 * * * * * * ** Example Class levels are for lower voltage types with higher Peak Pulse Current ratings MAXIMUM RATINGS * * * * MECHANICAL AND PACKAGING 7,500 watts Peak Pulse power dissipation at 10/1000 s pulse and 25oC for PHP or PIP8.4, 24, and 30 (see Figure 1, 2 and 3) 15,000 watts Peak Pulse power dissipation at 10/1000 s pulse and 25oC for PHP or PIP60, 120, 208, 250, 440 and 500 Operating and Storage temperatures: -65oC to +150oC Average Steady State power dissipation at 50oC: 7.5 watts tclamping (0 volts to BV): Less than 1 x 10-8 seconds Copyright 2003 5-26-2004 REV B * * * * * * PHP8.4 thru PIP500 * 7,500 and 15,000 Watts Peak Pulse Power dissipation (see Figure 1) Protection from switching transients and induced RF Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance up to Class 5** Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance up to Class 4** Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance up to Class 4** CASE: Molded case. TERMINAL: Silver plated brass. POLARITY: Bidirectional. WEIGHT: 50 grams (approx.). MOUNTING POSITION: Any Maximum Torque for Mounting: 15 in-lbs Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 PHP8.4 thru PHP500 and PIP8.4 thru PIP500 HIGH POWER BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION MICROSEMI PART NUMBER PHP8.4 PHP24 PHP30 PHP60 PHP120* PHP208 PHP250* PHP440 PHP500* PIP8.4 PIP24 PIP30 PIP60 PIP120* PIP208 PIP250* PIP440 PIP500* WORKING RMS VOLTAGE VWM(RMS) VOLTS AC 8.4 24.0 30.0 60.0 120.0 208.0 250.0 440.0 500.0 8.4 24.0 30.0 60.0 120.0 208.0 250.0 440.0 500.0 REVERSE STANDOFF VOLTAGE (NOTE 1) VWM VOLTS DC MINIMUM BREAKDOWN VOLTAGE V(BR) @ I(BR) VOLTS mA 12.0 34.0 42.5 85.0 170.0 295.0 354.0 623.0 708.0 12.0 34.0 42.5 85.0 170.0 295.0 354.0 623.0 708.0 14 40 50 100 200 347 418 735 835 14 40 50 100 200 347 418 735 835 MAXIMUM REVERSE CURRENT ID @ VWM MICRO AMPERES MAXIMUM CLAMPING VOLTAGE VC @ IPP VOLTS DC MAXIMUM PEAK PULSE CURRENT (FIG. 3) IPP A MAXIMUM PEAK PULSE POWER (1 ms) PPP KILOWATTS 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 22 67 84 167 319 536 652 1138 1292 22 67 84 167 319 536 652 1138 1292 341 112 90 90 47 28 23 13.2 11.6 341 112 90 90 47 28 23 13.2 11.6 7.5 7.5 7.5 15.0 15.0 15.0 15.0 15.0 15.0 7.5 7.5 7.5 15.0 15.0 15.0 15.0 15.0 15.0 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS Special Voltages available from factory. *Recommended for marine applications. NOTE 1: A TVS is normally selected according to the reverse "Standoff Voltage" (VWM) which should be equal to or greater than the dc or continuous peak operating voltage level. PHP/PIP8.4, 24, 30 o tp - Pulse Time T - Temperature - C FIGURE 1 Peak Pulse Power vs. Pulse Time Copyright 2003 5-26-2004 REV B Peak Pulse Power (PPP) or Current o (IPP) in percent of 25 C rating PHP/PIP60, 120, 208, 250, 440, 500 PHP8.4 thru PIP500 PPP - Peak Pulse Power - kW GRAPHS FIGURE 2 Pulse Waveform Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2 PHP8.4 thru PHP500 and PIP8.4 thru PIP500 HIGH POWER BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION WWW . Microsemi .C OM Test wave form parameters tr = 10 s tp = 1000 s FIGURE 3 Pulse Waveform (Derating Curve) PACKAGE DIMENSIONS MILITARY APPLICATIONS: PHP series sub-assemblies are packaged in a hermetically sealed glass-to-metal components with design consistency to MIL-PRF-19500/507. COMMERCIAL APPLICATIONS: PIP series sub-assemblies are packaged with molded epoxy components. PHP8.4 thru PIP500 Copyright 2003 5-26-2004 REV B Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3