Ordering information DC-DC Converters PCB Mount Type MGFS1R5 MGF 1 S 2 1R5 3 24 4 05 5 1 Series name 2 Single output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional Y2 : Output voltage adjustable (+10%, -5%) R MODEL MAX OUTPUT WATTAGE[W] VOLTAGE[V] DC OUTPUT CURRENT[A] MGFS1R5243R3 1.32 3.3 0.4 MGFS1R52405 1.50 5 0.3 MGFS1R52412 1.56 12 0.13 MGFS1R52415 1.50 15 0.1 MGFS1R5243R3 MGFS1R52405 DC9 - 36(Surge voltage 50V,100ms max) 0.072typ 0.079typ 77typ 80typ 3.3 5 0.4 0.3 20max 20max 20max 20max 120max 120max 200max 200max 50max 50max 80max 80max 20max 20max 30max (Minimum input, Io=100%) 3.21 - 3.42 4.90 - 5.21 MGFS1R52412 MGFS1R52415 0.079typ 83typ 12 0.13 48max 48max 150max 200max 150max 240max 48max 0.077typ 82typ 15 0.1 60max 60max 150max 200max 180max 290max 60max 11.64 - 12.36 14.55 - 15.45 MGFS1R54805 1.50 5 0.3 MGFS1R54812 1.56 12 0.13 MGFS1R54815 1.50 15 0.1 MGFS1R5483R3 MGFS1R54805 DC18 - 76(Surge voltage 100V,100ms max) 0.037typ 0.040typ 76typ 79typ 3.3 5 0.4 0.3 20max 20max 20max 20max 120max 120max 200max 200max 50max 50max 80max 80max 20max 20max 30max (Minimum input, Io=100%) 3.21 - 3.42 4.90 - 5.21 MGFS1R54812 MGFS1R54815 0.040typ 82typ 12 0.13 48max 48max 150max 200max 150max 240max 48max 0.039typ 81typ 15 0.1 60max 60max 150max 200max 180max 290max 60max 11.64 - 12.36 14.55 - 15.45 SPECIFICATIONS INPUT OUTPUT MODEL VOLTAGE[V] *1 CURRENT[A] *1 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] RIPPLE[mVp-p] *2 RIPPLE NOISE[mVp-p] *2 -20 to +85C TEMPERATURE REGULATION[mV] -40 to +85C *3 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE SETTING[V] PROTECTION OVERCURRENT PROTECTION CIRCUIT Works over 105% of rating and recovers automatically MODEL MAX OUTPUT WATTAGE[W] VOLTAGE[V] DC OUTPUT CURRENT[A] MGFS1R5483R3 1.32 3.3 0.4 SPECIFICATIONS INPUT OUTPUT MODEL VOLTAGE[V] *1 CURRENT[A] *1 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] RIPPLE[mVp-p] *2 RIPPLE NOISE[mVp-p] *2 -20 to +85C TEMPERATURE REGULATION[mV] -40 to +85C *3 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE SETTING[V] PROTECTION OVERCURRENT PROTECTION CIRCUIT MG-26 -O 6 Works over 105% of rating and recovers automatically MGFS1R5 GENERAL SPECIFICATIONS ISOLATION INPUT-OUTPUT DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz 98.0m/s2 (10G), 3minute period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G) 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 17.0X12.0X8.5mm [0.67X0.48X0.34 inches] (WXHXD) / 4g max COOLING METHOD Convection/Forced air *1Rated input 24V or 48V DC Io=100% *2Ripple and ripple noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. *3 Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. * Parallel operation with other model is not possible. * MGFW1R5xx12/MGFW1R5xx15 is available as single output, +24V/+30V External view Recommended Pad and Hole dia. Model TOP VIEW <Standard> 4-f0.9 <Option : Y2> 5-f0.9 3.5 [0.14] 0.5 [0.02] 12 [0.48] Model 12.7 [0.5] Vin Vin Vout 17 [0.67] 5.08 [0.2] 2.2 [0.09] Vout 2.8 [0.11] 0.25 [0.01] 8.5 [0.34] 2.54 [0.1] 0.5 [0.02] <Pin Configuration (Option : Y2)> 3.5 [0.14] 0.5 [0.02] 12 [0.48] Unit : 0.1inch Dimension : mm Vin Vin 2.2 [0.09] 12.7 [0.5] Vout TRM Vout 17 [0.67] 0.25 [0.01] 8.5 [0.34] 2.54 [0.1] Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal material : Copper Planting treatment of terminal : Lead free plating Case material : PBT Weight 4g max 0.5 [0.02] MG-27 Ordering information DC-DC Converters PCB Mount Type MGFS3 MGF 1 S 2 3 3 24 4 05 5 -O 6 1 Series name 2 Single output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional Y2 : Output voltage adjustable (+10%, -5%) R MODEL MAX OUTPUT WATTAGE[W] VOLTAGE[V] DC OUTPUT CURRENT[A] MGFS3243R3 2.64 3.3 0.8 MGFS32405 3.00 5 0.6 MGFS32412 3.00 12 0.25 MGFS32415 3.00 15 0.2 SPECIFICATIONS INPUT OUTPUT MODEL VOLTAGE[V] *1 CURRENT[A] *1 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] RIPPLE[mVp-p] *2 RIPPLE NOISE[mVp-p] *2 -20 to +75C TEMPERATURE REGULATION[mV] -40 to +75C *3 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE SETTING[V] MGFS3243R3 MGFS32405 MGFS32412 MGFS32415 DC9 - 36 (Surge voltage 50V,100ms max) (Refer to the instruction manual for input voltage derating.) 0.15typ 0.16typ 0.15typ 0.15typ 78typ 81typ 85typ 84typ 3.3 5 12 15 0.8 0.6 0.25 0.2 20max 20max 48max 60max 20max 20max 48max 60max 120max 120max 150max 150max 200max 200max 200max 200max 50max 50max 150max 180max 80max 80max 240max 290max 20max 20max 48max 60max 30max (Minimum input, Io=100%) 3.21 - 3.42 4.90 - 5.21 11.64 - 12.36 14.55 - 15.45 PROTECTION OVERCURRENT PROTECTION CIRCUIT Works over 105% of rating and recovers automatically MODEL MAX OUTPUT WATTAGE[W] VOLTAGE[V] DC OUTPUT CURRENT[A] MGFS3483R3 2.64 3.3 0.8 MGFS34805 3.00 5 0.6 MGFS34812 3.00 12 0.25 MGFS34815 3.00 15 0.2 SPECIFICATIONS INPUT OUTPUT MODEL VOLTAGE[V] *1 CURRENT[A] *1 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] RIPPLE[mVp-p] *2 RIPPLE NOISE[mVp-p] *2 -20 to +75C TEMPERATURE REGULATION[mV] -40 to +75C *3 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE SETTING[V] PROTECTION OVERCURRENT PROTECTION CIRCUIT MG-28 MGFS3483R3 MGFS34805 MGFS34812 MGFS34815 DC18 - 76 (Surge voltage 100V,100ms max) (Refer to the instruction manual for input voltage derating.) 0.072typ 0.079typ 0.076typ 0.076typ 77typ 80typ 83typ 83typ 3.3 5 12 15 0.8 0.6 0.25 0.2 20max 20max 48max 60max 20max 20max 48max 60max 120max 120max 150max 150max 200max 200max 200max 200max 50max 50max 150max 180max 80max 80max 240max 290max 20max 20max 48max 60max 30max (Minimum input, Io=100%) 3.21 - 3.42 4.90 - 5.21 11.64 - 12.36 14.55 - 15.45 Works over 105% of rating and recovers automatically MGFS3 GENERAL SPECIFICATIONS ISOLATION INPUT-OUTPUT DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz 98.0m/s2 (10G), 3minute period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G) 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 17.0X12.0X8.5mm [0.67X0.48X0.34 inches] (WXHXD) / 4g max COOLING METHOD Convection/Forced air *1Rated input 24V or 48V DC Io=100% *2Ripple and ripple noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. *3Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. *Parallel operation with other model is not possible. *MGFW3xx12/MGFW3xx15 is available as single output, +24V/+30V External view Recommended Pad and Hole dia. Model TOP VIEW <Standard> 4-f0.9 <Option : Y2> 5-f0.9 3.5 [0.14] 0.5 [0.02] 12 [0.48] Model 12.7 [0.5] Vin Vin Vout 17 [0.67] 5.08 [0.2] 2.2 [0.09] Vout 2.8 [0.11] 0.25 [0.01] 8.5 [0.34] 2.54 [0.1] 0.5 [0.02] <Pin Configuration (Option : Y2)> 3.5 [0.14] 0.5 [0.02] 12 [0.48] Unit : 0.1inch Dimension : mm Vin Vin 2.2 [0.09] 12.7 [0.5] Vout TRM Vout 17 [0.67] 0.25 [0.01] 8.5 [0.34] 2.54 [0.1] Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal material : Copper Planting treatment of terminal : Lead free plating Case material : PBT Weight 4g max 0.5 [0.02] MG-29 Ordering information DC-DC Converters PCB Mount Type MGFS6 MGF 1 S 2 6 3 05 5 MGFS6243R3 5.28 3.3 1.6 MGFS62405 6.0 5 1.2 MGFS62412 6.0 12 0.5 MGFS62415 6.0 15 0.4 SPECIFICATIONS MODEL VOLTAGE[V] *1 INPUT CURRENT[A] *1 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] Io=30% RIPPLE[mVp-p] *2 Io=0 - 30% Io=30% OUTPUT RIPPLE NOISE[mVp-p] *2 Io=0 - 30% -20 to +65C TEMPERATURE REGULATION[mV] -40 to +65C *3 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE SETTING[V] PROTECTION OVERCURRENT PROTECTION CIRCUIT AND REMOTE ON/OFF OTHERS MGFS6243R3 MGFS62405 DC9 - 36 (Surge voltage 50V,100ms max) 0.28typ 0.30typ 80typ 84typ 3.3 5 1.6 1.2 20max 20max 20max 20max 75max 75max 225max 225max 120max 120max 300max 300max 50max 50max 80max 80max 20max 20max 30max (Minimum input, Io=100%) 3.21 - 3.42 4.90 - 5.21 Works over 105% of rating and recovers automatically Provided (Negative logic L : ON, H : OFF) MGFS62412 MGFS62415 0.29typ 88typ 12 0.5 48max 48max 100max 300max 150max 400max 150max 240max 48max 0.29typ 88typ 15 0.4 60max 60max 100max 300max 150max 400max 180max 290max 60max 11.64 - 12.36 14.55 - 15.45 MODEL MAX OUTPUT WATTAGE[W] VOLTAGE[V] DC OUTPUT CURRENT[A] MGFS6483R3 5.28 3.3 1.6 MGFS64812 6.0 12 0.5 MGFS64815 6.0 15 0.4 MGFS64812 MGFS64815 0.15typ 88typ 12 0.5 48max 48max 100max 300max 150max 400max 150max 240max 48max 0.15typ 88typ 15 0.4 60max 60max 100max 300max 150max 400max 180max 290max 60max 11.64 - 12.36 14.55 - 15.45 MGFS64805 6.0 5 1.2 SPECIFICATIONS MODEL VOLTAGE[V] *1 INPUT CURRENT[A] *1 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] Io=30% RIPPLE[mVp-p] *2 Io=0 - 30% Io=30% OUTPUT RIPPLE NOISE[mVp-p] *2 Io=0 - 30% -20 to +65C TEMPERATURE REGULATION[mV] -40 to +65C *3 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE SETTING[V] PROTECTION OVERCURRENT PROTECTION CIRCUIT AND REMOTE ON/OFF OTHERS MG-30 -O 6 1 Series name 2 Single output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional Y2 : Output voltage adjustable (+10%, -5%) R MODEL MAX OUTPUT WATTAGE[W] VOLTAGE[V] DC OUTPUT CURRENT[A] 24 4 MGFS6483R3 MGFS64805 DC18 - 76 (Surge voltage 100V, 100ms max) 0.14typ 0.15typ 80typ 84typ 3.3 5 1.6 1.2 20max 20max 20max 20max 75max 75max 225max 225max 120max 120max 300max 300max 50max 50max 80max 80max 20max 20max 30max (Minimum input, Io=100%) 3.21 - 3.42 4.90 - 5.21 Works over 105% of rating and recovers automatically Provided (Negative logic L : ON, H : OFF) MGFS6 GENERAL SPECIFICATIONS ISOLATION INPUT-OUTPUT DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max ENVIRONMENT SAFETY OTHERS -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz 98.0m/s2 (10G), 3minute period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G) 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 22.0X12.0X9.5mm [0.87X0.48X0.38 inches] (WXHXD) / 7g max COOLING METHOD Convection/Forced air Rated input 24V or 48V DC Io=100% Ripple and ripple noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. Parallel operation with other model is not possible. MGFW6xx12/MGFW6xx15 is available as single output, +24V/+30V External view Recommended Pad and Hole dia. Model (TOP VIEW) 7-f0.9 3.5 [0.14] 0.5 [0.02] 12 [0.48] Model 2.11 [0.09] 17.78 [0.7] Vin Vin RC NC Vout Vout NC 22 [0.87] 0.25 [0.01] 9.5 [0.38] 2.54 [0.1] Unit : 0.1inch Dimension : mm 2.8 [0.11] Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal material : Copper Planting treatment of terminal : Lead free plating Case material : PBT Weight 7g max 0.5 [0.02] 3.5 [0.14] 0.5 [0.02] 12 [0.48] <Pin Configuration (Option : Y2)> 2.54 [0.1] 2.11 [0.09] 17.78 [0.7] Vin Vin RC TRM Vout Vout NC 22 [0.87] 0.25 [0.01] 9.5 [0.38] *1 *2 *3 * * STORAGE TEMP.,HUMID.AND ALTITUDE 0.5 [0.02] MG-31 Ordering information DC-DC Converters PCB Mount Type MGFS10 MGF 1 S 2 10 3 05 5 -O 6 1 Series name 2 Single output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional Y2 : Output voltage adjustable (+10%, -5%) R MODEL MAX OUTPUT WATTAGE[W] VOLTAGE[V] DC OUTPUT CURRENT[A] 24 4 MGFS10243R3 8.58 3.3 2.6 MGFS102405 10.0 5 2.0 MGFS102412 10.8 12 0.9 MGFS102415 10.5 15 0.7 SPECIFICATIONS MODEL VOLTAGE[V] *1 INPUT CURRENT[A] *1 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] Io=30% RIPPLE[mVp-p] *2 Io=0 - 30% Io=30% OUTPUT RIPPLE NOISE[mVp-p] *2 Io=0 - 30% -20 to +55C TEMPERATURE REGULATION[mV] -40 to +55C *3 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE SETTING[V] PROTECTION OVERCURRENT PROTECTION CIRCUIT AND REMOTE ON/OFF OTHERS MGFS10243R3 MGFS102405 MGFS102412 MGFS102415 DC9 - 36 (Surge voltage 50V,100ms max) (Refer to the instruction manual for input voltage derating.) 0.42typ 0.48typ 0.51typ 0.50typ 86typ 88typ 89typ 89typ 3.3 5 12 15 2.6 2.0 0.9 0.7 20max 20max 48max 60max 20max 20max 48max 60max 75max 75max 100max 100max 225max 225max 300max 300max 120max 120max 150max 150max 300max 300max 400max 400max 50max 50max 150max 180max 80max 80max 240max 290max 20max 20max 48max 60max 30max (Minimum input, Io=100%) 3.21 - 3.42 4.90 - 5.21 11.64 - 12.36 14.55 - 15.45 Works over 105% of rating and recovers automatically Provided (Negative logic L : ON, H : OFF) MODEL MAX OUTPUT WATTAGE[W] VOLTAGE[V] DC OUTPUT CURRENT[A] MGFS10483R3 8.58 3.3 2.6 MGFS104805 10.0 5 2.0 MGFS104812 10.8 12 0.9 MGFS104815 10.5 15 0.7 SPECIFICATIONS MODEL VOLTAGE[V] *1 INPUT CURRENT[A] *1 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] Io=30% RIPPLE[mVp-p] *2 Io=0 - 30% Io=30% OUTPUT RIPPLE NOISE[mVp-p] *2 Io=0 - 30% -20 to +55C TEMPERATURE REGULATION[mV] -40 to +55C *3 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE SETTING[V] PROTECTION OVERCURRENT PROTECTION CIRCUIT AND REMOTE ON/OFF OTHERS MG-32 MGFS10483R3 MGFS104805 MGFS104812 MGFS104815 DC18 - 76 (Surge voltage 100V,100ms max) (Refer to the instruction manual for input voltage derating.) 0.21typ 0.24typ 0.26typ 0.25typ 86typ 88typ 89typ 89typ 3.3 5 12 15 2.6 2.0 0.9 0.7 20max 20max 48max 60max 20max 20max 48max 60max 75max 75max 100max 100max 225max 225max 300max 300max 120max 120max 150max 150max 300max 300max 400max 400max 50max 50max 150max 180max 80max 80max 240max 290max 20max 20max 48max 60max 30max (Minimum input, Io=100%) 3.21 - 3.42 4.90 - 5.21 11.64 - 12.36 14.55 - 15.45 Works over 105% of rating and recovers automatically Provided (Negative logic L : ON, H : OFF) MGFS10 GENERAL SPECIFICATIONS ISOLATION INPUT-OUTPUT DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max ENVIRONMENT SAFETY OTHERS -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz 98.0m/s2 (10G), 3minute period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G) 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 22.0X12.0X9.5mm [0.87X0.48X0.38 inches] (WXHXD) / 7g max COOLING METHOD Convection/Forced air Rated input 24V or 48V DC Io=100% Ripple and ripple noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. Parallel operation with other model is not possible. MGFW10xx12/MGFW10xx15 is available as single output, +24V/+30V External view Recommended Pad and Hole dia. Model (TOP VIEW) 7-f0.9 3.5 [0.14] 0.5 [0.02] 12 [0.48] Model 2.11 [0.09] 17.78 [0.7] Vin Vin RC NC Vout Vout NC 22 [0.87] 0.25 [0.01] 9.5 [0.38] 2.54 [0.1] Unit : 0.1inch Dimension : mm 2.8 [0.11] Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal material : Copper Planting treatment of terminal : Lead free plating Case material : PBT Weight 7g max 0.5 [0.02] 3.5 [0.14] 0.5 [0.02] 12 [0.48] <Pin Configuration (Option : Y2)> 2.54 [0.1] 2.11 [0.09] 17.78 [0.7] Vin Vin RC TRM Vout Vout NC 22 [0.87] 0.25 [0.01] 9.5 [0.38] *1 *2 *3 * * STORAGE TEMP.,HUMID.AND ALTITUDE 0.5 [0.02] MG-33 Ordering information DC-DC Converters PCB Mount Type MGFS15 MGF 1 S 2 15 3 05 5 *1 MGFS15243R3 13.2 3.3 4 MGFS152405 15 5 3 MGFS152412 15.6 12 1.3 MGFS152415 15 15 1 SPECIFICATIONS MODEL VOLTAGE[V] *2 INPUT CURRENT[A] *2 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] -20 to +60C RIPPLE[mVp-p] *3 -40 to -20C -20 to +60C RIPPLE NOISE[mVp-p] OUTPUT *3 -40 to -20C -20 to +60C TEMPERATURE REGULATION[mV] -40 to +60C *4 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT VOLTAGE SETTING[V]*5 PROTECTION OVERCURRENT PROTECTION CIRCUIT AND REMOTE ON/OFF OTHERS MGFS15243R3 MGFS152405 DC9 - 36 0.63typ 0.71typ 87typ 88typ 3.3 5 4 3 13.2max 20max 13.2max 20max 75max 75max 100max 100max 75max 75max 150max 150max 50max 50max 80max 80max 20max 20max 30max (Minimum input, Io=100%) Fixed (TRM pin open) 10% adjustable by external VR 3.296 - 3.404 4.975 - 5.137 Works over 105% of rating and recovers automatically Provided (Negative logic L:ON, H:OFF) MGFS152412 MGFS152415 0.73typ 89typ 12 1.3 48max 48max 100max 120max 100max 150max 150max 240max 48max 0.70typ 89typ 15 1 60max 60max 100max 120max 100max 150max 180max 290max 60max 11.857 - 12.243 14.839 - 15.321 MODEL MAX OUTPUT WATTAGE[W] VOLTAGE[V] DC OUTPUT CURRENT[A] MGFS15483R3 13.2 3.3 4 MGFS154812 15.6 12 1.3 MGFS154815 15 15 1 MGFS154812 MGFS154815 0.37typ 88typ 12 1.3 48max 48max 100max 120max 100max 150max 150max 240max 48max 0.35typ 89typ 15 1 60max 60max 100max 120max 100max 150max 180max 290max 60max 11.857 - 12.243 14.839 - 15.321 *1 MGFS154805 15 5 3 SPECIFICATIONS MODEL VOLTAGE[V] *2 INPUT CURRENT[A] *2 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] -20 to +60C RIPPLE[mVp-p] *3 -40 to -20C -20 to +60C RIPPLE NOISE[mVp-p] OUTPUT *3 -40 to -20C -20 to +60C TEMPERATURE REGULATION[mV] -40 to +60C *4 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT VOLTAGE SETTING[V]*5 PROTECTION OVERCURRENT PROTECTION CIRCUIT AND REMOTE ON/OFF OTHERS MG-34 -O 6 1 Series name 2 Single output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional G : Capacitor between Input and Output is removed. R : with Remote ON/OFF (Positive logic control) R MODEL MAX OUTPUT WATTAGE[W] VOLTAGE[V] DC OUTPUT CURRENT[A] 24 4 MGFS15483R3 MGFS154805 DC18 - 76 0.32typ 0.36typ 87typ 88typ 3.3 5 4 3 13.2max 20max 13.2max 20max 75max 75max 100max 100max 75max 75max 150max 150max 50max 50max 80max 80max 20max 20max 30max (Minimum input, Io=100%) Fixed (TRM pin open) 10% adjustable by external VR 3.296 - 3.404 4.975 - 5.137 Works over 105% of rating and recovers automatically Provided (Negative logic L:ON, H:OFF) MGFS15 GENERAL SPECIFICATIONS ISOLATION INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 25.4X9.9X25.4mm [1X0.39X1 inches] (WXHXD) / 20g max COOLING METHOD Convection/Forced air *1MGFW15xx05/MGFW15xx12/MGFW15xx15 is available as single output, +10V/+24V/+30V *2Rated input 12V, 24V or 48V DC lo=100% *3 Ripple and Ripple Noise is measured by using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) *4Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. *5Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C. *Parallel operation with other model is not possible. External view Name Plate Recommended Pad and Hole dia. (TOP VIEW) 6-f1.5 9.9 [0.39] Case 3.5 [0.14] Bottom Cover f 1 0.1 Unit : 0.1inch Dimension : mm 10.16 [0.4] +Vout 2.54 [0.1] 25.4 [1.0] TRM -Vin 10.16 [0.4] 7.62 [0.3] 5.08 [0.2] +Vin RC -Vout Tolerance 0.5 [0.02] Dimensions in mm, [ ]=inches Pin terminal material : Copper Plating treatment of terminal : Lead free plating Case material : Brass Plating treatment of case : Nickel plating Bottom Cover : FR4 (t=0.6) [t=0.024] Please keep enough creepage distance with the pattern on PCB and other components. Weight 20g max 20.32 [0.8] 25.4 [1.0] MG-35 Ordering information DC-DC Converters PCB Mount Type MGFS30 MGF 1 S 2 30 3 05 5 *1 MGFS30243R3 24.75 3.3 7.5 MGFS302405 30 5 6 MGFS302412 30 12 2.5 MGFS302415 30 15 2 MGFS302412 MGFS302415 1.40typ 89typ 12 2.5 48max 48max 100max 120max 100max 150max 150max 240max 48max 1.40typ 89typ 15 2 60max 60max 100max 120max 100max 150max 180max 290max 60max 11.857 - 12.243 14.839 - 15.321 MGFS304812 30 12 2.5 MGFS304815 30 15 2 MGFS304812 MGFS304815 0.70typ 89typ 12 2.5 48max 48max 100max 120max 100max 150max 150max 240max 48max 0.70typ 89typ 15 2 60max 60max 100max 120max 100max 150max 180max 290max 60max 11.857 - 12.243 14.839 - 15.321 SPECIFICATIONS MODEL VOLTAGE[V] *2 INPUT CURRENT[A] *2 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] -20 to +60C RIPPLE[mVp-p] *3 -40 to -20C -20 to +60C RIPPLE NOISE[mVp-p] OUTPUT *3 -40 to -20C -20 to +60C TEMPERATURE REGULATION[mV] -40 to +60C *4 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT VOLTAGE SETTING[V]*5 PROTECTION OVERCURRENT PROTECTION CIRCUIT AND OVERVOLTAGE PROTECTION[V] OTHERS REMOTE ON/OFF MGFS30243R3 MGFS302405 DC9 - 36 1.16typ 1.39typ 89typ 90typ 3.3 5 7.5 6 13.2max 20max 13.2max 20max 75max 75max 100max 100max 75max 75max 150max 150max 50max 50max 80max 80max 20max 20max 30max (Minimum input, Io=100%) Fixed (TRM pin open) 10% adjustable by external VR 3.296 - 3.404 4.975 - 5.137 Works over 105% of rating and recovers automatically Works over 120 to 160% of rating Provided (Negative logic L:ON, H:OFF) MODEL MAX OUTPUT WATTAGE[W] VOLTAGE[V] DC OUTPUT CURRENT[A] MGFS30483R3 24.75 3.3 7.5 *1 MGFS304805 30 5 6 SPECIFICATIONS MODEL VOLTAGE[V] *2 INPUT CURRENT[A] *2 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] -20 to +60C RIPPLE[mVp-p] *3 -40 to -20C -20 to +60C RIPPLE NOISE[mVp-p] OUTPUT *3 -40 to -20C -20 to +60C TEMPERATURE REGULATION[mV] -40 to +60C *4 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT VOLTAGE SETTING[V]*5 PROTECTION OVERCURRENT PROTECTION CIRCUIT AND OVERVOLTAGE PROTECTION[V] OTHERS REMOTE ON/OFF MG-36 -O 6 1 Series name 2 Single output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional G : Capacitor between Input and Output is removed. R : with Remote ON/OFF (Positive logic control) R MODEL MAX OUTPUT WATTAGE[W] VOLTAGE[V] DC OUTPUT CURRENT[A] 24 4 MGFS30483R3 MGFS304805 DC18 - 76 0.58typ 0.70typ 89typ 90typ 3.3 5 7.5 6 13.2max 20max 13.2max 20max 75max 75max 100max 100max 75max 75max 150max 150max 50max 50max 80max 80max 20max 20max 30max (Minimum input, Io=100%) Fixed (TRM pin open) 10% adjustable by external VR 3.296 - 3.404 4.975 - 5.137 Works over 105% of rating and recovers automatically Works over 120 to 160% of rating Provided (Negative logic L:ON, H:OFF) MGFS30 GENERAL SPECIFICATIONS ISOLATION INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 25.4X9.9X50.8mm [1X0.39X2 inches] (WXHXD) / 40g max COOLING METHOD Convection/Forced air *1MGFW30xx05/MGFW30xx12/MGFW30xx15 is available as single output, +10V/+24V/+30V *2Rated input 12V, 24V or 48V DC lo=100% *3 Ripple and Ripple Noise is measured by using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) *4Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. *5Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C. *Parallel operation with other model is not possible. External view Name Plate Recommended Pad and Hole dia. (TOP VIEW) 6-f1.5 9.9 [0.39] Case 3.5 [0.14] Bottom Cover f 1 0.1 Unit : 0.1inch Dimension : mm +Vout 10.16 [0.4] 5.08 [0.2] +Vin -Vin 25.4 [1.0] 10.16 [0.4] 10.16 [0.4] -Vout RC 5.08 [0.2] TRM Tolerance 0.5 [0.02] Dimensions in mm, [ ]=inches Pin terminal material : Copper Plating treatment of terminal : Lead free plating Case material : Brass Plating treatment of case : Nickel plating Bottom Cover : FR4 (t=0.6) [t=0.024] Please keep enough creepage distance with the pattern on PCB and other components. Weight 40g max 45.72 [1.8] 50.8 [2.0] MG-37 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cosel: MGFS304805-R MGFS304812 MGFS304812-R MGFS304815 MGFS304815-R MGFS30483R3 MGFS302415-R MGFS30243R3 MGFS30243R3-R MGFS304805 MGFS302405 MGFS302405-G MGFS302405-R MGFS302412 MGFS302412-R MGFS302415 MGFS154812 MGFS154812-R MGFS154815 MGFS154815-R MGFS15483R3 MGFS15483R3-R MGFS152415 MGFS152415-R MGFS15243R3 MGFS15243R3-R MGFS154805 MGFS154805-R MGFS30483R3-R MGFS152405 MGFS152405-G MGFS152405-R MGFS152412 MGFS152412-R