min.
dia.
typ.
Document Number 5748
Issue 2
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
FEATURES
• HERMETICALLY SEALED TO–39 METAL
PACKAGE
• SIMPLE DRIVE REQUIREMENTS
• LIGHTWEIGHT
• SCREENING OPTIONS AVAILABLE
PIN1 – Source PIN 2 – Gate PIN 3 – Drain
VGS Gate – Source Voltage
IDContinuous Drain Current (VGS = 0 , Tcase = 25°C)
IDContinuous Drain Current (VGS = 0 , Tcase = 100°C)
IDM Pulsed Drain Current 1
PDPower Dissipation @ Tcase = 25°C
Linear Derating Factor
TJ, Tstg Operating and Storage Temperature Range
TLPackage Mounting Surface Temperature (for 5 sec)
RθJC Thermal Resistance Junction to Case
±20V
-4.0A
-2.6A
-16A
20 W
0.16 W/°C
–55 to 150°C
300°C
6.25°C/W
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
Notes
1) Repetitive Rating – Pulse width limited by maximum junction temperature.