ANP One-Piece Printed Circuit Board Connectors (Wire-to-Board) AMP-LEAF Connectors Product Facts w Contacts on .156 [3.96] centers w Contact types include crimp snap-in, solder eyelet and posted w Glass-filled polyester, phenolic or dially! phthalate housings w Closed card entry design prevents overstressing of contacts w Gold-over-nickel plated contacts w Locking lance permits easy contact replacement mw Keying w Contacts maintain exact pressures on the circuit paths, despite repeated insertions and extractions mw Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 w Certified by Canadian Standards Association**, File No. LR 7189 A @: ** CSA Certification pending for certain products, as noted. SOURCE: Catalog 82619 AMP-LEAF Connectors are available with crimp, snap-in, solder eyelet contacts or preloaded with right-angle posted contacts. The crimp type printed circuit connector is supplied with the housing unloadedthe user buys only enough contacts to Satisfy circuit requirements. This feature, when coupled with the AMP matched tooling, contributes substantially to lower installed costs. Specifications subject fo change. Right-angle posted connectors are supplied in various sizes, with preloaded contacts on one or both sides. The solder-type posts are formed 90 from the housing to permit right-angle interfacing between mother and daughter boards. 1-800-522-6752 Product Information Center/ AMP FAX Service Interconnection Systems Selection Guide 82750 Revised 7-95 1-800-722-1111 Tooling/Technical Assistance Center SIOPIBUUND PROG WNBA pew, (pseog-0}-a41\A) $40]08UU0) P1eOg NID Paid 8091g-2UC 3043E Printed Circuit Board Connectors One-Piece Printed Circuit Board Connectors (Wire-to-Board) 3044 Interconnection Systems AME One-Piece Printed Circuit Board Connectors Selection Guide 82750 (Wire-to-Board) Revised 7-95 AMP-LEAF Connectors (Continued) Crimp, Snap-In Contacts Materia{ and Finish Phosphor bronze, plated as follows: A.000100-.000200 [0.00254- 0.00508] tin (lubricant must be used) Wire Barret Crimp Insulation Support B.000030 [0.00076] gold in mating somact area; gold flash on remainder of uraces contact, with entire contact under- plated .000050 [0.00127] nickel y C.000015 [0.00038] gold in mating Terminal Stop area, gold flash on remainder of Locking Lance contact, with entire contact under- plated .000050 [0.00127] nickel Wire Insulation Range Contact Part Numbers Contact Applicator for Applicator for Hand Range Single Double Loose Strip Finish AMP-O-LECTRIC Strippar/Crimper AWG/mm? Wire Wire Piece Form Machine Machine Oe, | Be 5839903 583204-2 B 466366-2 466911-1 900283 120 583989-2 583361-2 A 90017-3 22-18 55-.080 3.05 583989-3 583361-3 B 466367-2 _ 90028-3 0.3-0.9 1.40-2.03 Max. = 60030-5* B 90101-3 583989-6 583555-6 C (2 #20) 16 108 080-160 ne , .080-. . . . _ ( 1.25-1.40 cm 9.03-4.06 583991-3 60151-6 B 466368-2 4001-3 , (1 #16) *Used with .084-.104 [2.13-2.64] thick Pc board. Notes: 1. Applicators are for use with Model K" machines. Call the Tooling/Technical Assistance Center for the part numbers of applicators for use with other bench machines and fully-automatic AMPOMATOR Lead Making Machines. 2. Shorting contacts are available, consult AMP. 3. Contacts and housings to accommodate .093 [2.36] thick Pc boards can be made available, consult AMP. Hand Crimping Tool Contact Extraction Tool Tool Number Used with Housings 480110 480142 582140 582147 582264 582358 582500 582963 583167 583280 465195-1 583399-1, -3 583552-1 583617-1, -3 oe 583637-4 Dummy Contact Plain Finish 583680-1 =x Part No. 66084-1 583685-1 oe 583722-1 Material Tin Finish~ 583723-1 Phosphor bronze A Part No. 66084-2 . 583724-1 [Vb Ph Gold Finish 583725-1, -3 ee Part No. 66084-3 583726-1 480133 465195-2 480146 582191 i i .055-.070 [1.4-1.78] thk. Pc Commoning Spring / board-Part No. 66092-1 ne .084-.104 [2.13-2.64] thk. Pc Material and Finish board-Part No. 66064-1 Beryllium copper, gold plated .055-.070 [1.4-1.78] and .084-.104 [2.13-2.64] thk. Pe board with locking latches Part No. 583454-1 SOURCE: Catalog 82619 Specifications 1-800-522-6752 1-800-722-1111 subject to change. Product information Center AMP FAX Service Tooling/Technical Assistance CenterInterconnection Systems ANMEP One-Piece Printed Circuit Board Connectors Selection Guide 82750 (Wire-to-Board) Revised 7-95 AMP-LEAF Connectors (Continued) Solder Eyelet Contact Material and Finish Phosphor bronze, plated .000015 [0.00038] gold in contact area, gold flash on remainder of contact, with entire contact underplated .000050 [0.00127] nickel Contact Surfaces Standard Eyelet Type Contact Part No. 66067-5 (For .055-.070 [1.4-1.78] Thick Pc Boards) Note: Solder tab will accommodate a maximum of two 16 AWG [1.25-1.4 mm] solid wires, or two 18 AWG [0.8-0.9 mm stranded wires. Post Type Contacts Material and Finish Phosphor bronze, plated .000015 (0.00038) gold in contact area, tin an -185 post, with entire contact underplated [4.70] 1. Contact [ Surfaces "000050 [0.00127] nickel > a EDS _ No. of Loose Piece Post TERMI-POINT Contact Part No. Length (.045 x .045 Clips or Wraps L er Post (1.14 x 1.14] P Post) 24.38 4 1-582355-3 -760 - . 19.3 3 1-582355-4 560 a 7 44.22 2 1-82355-5 .360 - 7 9.14 1 1-582355-6 213 . 7 5.44 1 2-582355-0 Note: Post type contacts are for .055-.070 [1.4-1.78] thick Pc boards. SOURCE: Catalog 82619 Caen eeee eee r rere ee Specifications 1-800-522-6752 1-800-722-1111 subject to change. Praduct Information Center/ AMP FAX Service Tooling/Technical Assistance Center $10}99UU0) puvog WNIAID paytg (paeog-0}-a4iM) SyO}IaUUOD PykOg JINDNID PayUld a991q-2U0 3045B Printed Circuit Board Connectors One-Piece Printed Circuit Board Connectors (Wire-to-Board) 3046 interconnection Systems One-Piece Printed Circuit Board Connectors Selection Guide 82750 AWN - (Wire-to-Board) Revised 7-95 AMP-LEAF Connectors (Continued) .156 [3.96] Centerline Glass-Filled Polyester Note: 15 Pos. Housing Dim. (Typ.)3.189 [81.00] L x .350 [8.89] W x .700 [17.78] H Housings No. of Housing Dual Positions Part Numbers 6 583722-1 8 530864-1* 10 83723-1 582963-2* 12 583724-1* 15 83554-1""' 583680- 1 18 583725-1 83725-3 583617-1 22 83617-3 25 583726-1 30 583685-1 36 583552-1* *CSA Certification pending. Housing without mounting ears. Note: Other connector sizes can be made available, consult AMP. Glass-Filted Phenolic Housings Note: 18 Pos. Housing Dim. (Typ.)}3.650 [92.71] L x .375 [9.53] W x .700 [17.78] H No. of Housing Dual Positions Part Numbers 8 582140-5 10 582963-2* 583280-1' 480110-5 15 1-582147-5* 582500-5 480133-5 18 1-582191-5* 583399-37+ 22 480142-3 25 583167-3" 28 83637-1 30 480146-7" 32 : 582264-2+ *CSA Certification pending. Housing without mounting ears. ? Housing does not accommodate intercontact keying plug. Twin slot housing. For .086 to .104 {2.18 to 2.64] thick Pc boards (special contacts required). Note: Other connector sizes can be made available, consult AMP. SOURCE: Cataiog 82619 a a _ Specifications 1-800-522-6752 1-800-722-1111 subject to change. Product Information Center/ AMP FAX Service Tooling/Technical Assistance CenterInterconnection Systems AME, One-Piece Printed Circuit Board Connectors Selection Guide 82750 (Wire-to-Board) Revised 7-95 AMP-LEAF Connectors (Continued) -156 [3.96] Centerline (Continued) Dially! Phthalate Housings Single Siot Housing Note: 18 Pos. Housing Dim. (Typ.)3.656 [92.86] L x .375 [9.53] W x .700 [17.78] H No. af Housing Dual Positions Part Numbers 8 82140-2 10 582963-4* 1-582147-2* 15 / 4801 10-2 582500-2 18 480133-2 1-582191-2" 22 480142-2 582358-2 32 582264-5' CSA Certification pending. For .086-.104 [2.18-2.64] thick Pc boards (special contacts required). Note: Other connector sizes can be made available, consult AMP. Housings Preloaded with Right-Angle Post Contacts (preog-01-a41M\) S1019@ULION pukog YN PAU 99alg-2ug S Loaded Two Sides (X) Note: 18 Pos. Housing Dim. (Typ.}-3.650 [92.71] L x .700 [17.78] W x .375 [9.53] H No. of Part Loading Housing Dual Numbers Two Sides (X) Material Positions Qne Side () 10 583599-1* x 583599-2* Y 15 583545-1* x Gl Filled > lass-Fille 18 5835441 x Phenolic 583544-2* Y 583458-2* x 29 83458-1* Y 6 * lass-Filed 583975-1 x Polyester * Glass-Filled 28 530061 -1 x Phenolic *CSA Certification pending. Notes: 1. Other connector sizes can be made available, consult AMP. 2. Finished hole size is .048-.054 [1.22-1.37] diameter. SOURCE: Catalog 82619 Specifications 1-800-522-6752 1-800-722-1111 subject to change. Product Information Center/ AMP FAX Service Tooling/Technical Assistance Center a SIOJIOULOD PIO HINDI Pewid5 Printed Circuit Board Connectors One-Piece Printed Circuit Board Connectors (Wire-to-Board) 3048 Interconnection Systems ARP One-Piece Printed Circuit Board Connectors Selection Guide 82750 (Wire-to-Board) Revised 7-95 AMP-LEAF Connector Accessories Keying Piugs On-Contact Keying Plugs Intercontact Keying Plugs 040 [1.02] Wide-Part No, 582501-1 (Nylon) 040 [1.02] Wide-Part No. 582501-3 (Polyester) 025 [0.64] Wide-Part No, 583274-1 (Nylon) .025 [0.64] Wide-Part No. 83274-3 (Polyester) .055-.070 (1.4-1.78}] Board ThicknessPart No. 480143-1 (Nylon) .084-.104 (2.13-2.64] Board ThicknessPart No. 582756-1 (Nylon) Retaining Spring Nickel Finish-Part No. 42973-1 Plain Finish-Part No. 42973-2 Gold Finish-Part No, 42973-3 SOURCE: Catalog 82619 Specifications 1-800-522-6752 1-800-722-1111 Subject to change. Product Information Center/ AMP FAX Service Tooling/Technical Assistance Center