End of Life - August 2013
FP..P
www.vishay.com Vishay Dale
Revision: 05-Feb-13 1Document Number: 31030
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Metal Film Resistors, Pulse Withstanding Protective
FEATURES
• Special Vishay Dale design provides lightning
withstand characteristics along with resistor
functionality
• A thicker tin oxide power film system provides
lightning surge absorption capabilities
• Higher turns ratio and glass substrate provide
sharper fusing characteristic than the standard
flameproof product line
• Protect against a variety of electrical hazards
which can change or destroy sensitive
electronic equipment including high energy voltage
surges caused by power line anomalies (direct power
crosses or inductively coupled effects) and other
momentary overvoltages
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
*Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
Notes
(1) Pulse withstanding capabilities are value dependent. Values above the cutoff value will meet all of the surge test requirements shown on the
following pages.
(2) Contact factory for values outside these published ranges.
Notes
(3) Some packaging codes are model specific.
(4) For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544).
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HISTORICAL
MODEL
POWER RATING
P70 °C
W
RESISTANCE
RANGE (2)
TOLERANCE
± % CUTOFF VALUE (1)
FP1/2P FP1/2P 0.5 10 to 1M 1, 2, 5 2K00
FP001P FP1P 1 10 to 1M 1, 2, 5 1K00
FP002P FP2P 2 355 to 125K 1, 2, 5 355R
FP003P FP3P 3 46.4 to 125K 1, 2, 5 250R
FP069P FP69P 2 25 to 126K 1, 2, 5 400R
MARKING
- DALE
- Value
- Tolerance
- Style and case size
- Date code (year/week)
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: FP002P1K00F9256B8 (preferred part numbering format)
GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE SPEC CODES PACKAGING (3)
(See Standard
Electrical
Specifications
table)
R =
K = k
M = M
10R0 = 10
1K30 = 1.3 k
1M00 = 1.0 M
F = ± 1 %
G = ± 2 %
J = ± 5 %
5555 = FP1/2P
6206 = FP001P
9256 = FP002P
9303 = FP003P
7532 = FP069P
EK = Lead (Pb)-free, strip
EA = Lead (Pb)-free, T/R
B8 = Tin/lead, strip
CH = Tin/lead, T/R (750 pieces)
CJ = Tin/lead, T/R (1000 pieces)
Historical Part Number: FP2P 1K00 1 % B8 (will continue to be accepted)
FP2P 1K00 1 % B8
HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING
02P1 0 F9KP0 56B2F 80
End of Life - August 2013
FP..P
www.vishay.com Vishay Dale
Revision: 05-Feb-13 2Document Number: 31030
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Lead length for product in strip pack. For product supplied in Tape and Reel, the actual lead length would be based on the body size, tape
spacing and lead trim.
DIMENSIONS in inches (millimeters)
GLOBAL
MODEL AB D
FP1/2P 0.360 ± 0.020 (9.14 ± 0.51) 0.138 + 0.012 - 0.023 (3.51 + 0.31 - 0.58) 0.032 ± 0.002 (0.81 ± 0.05)
FP001P 0.560 ± 0.031 (14.22 ± 0.79) 0.190 + 0.005 - 0.030 (4.83 + 0.13 - 0.76) 0.032 ± 0.002 (0.81 ± 0.05)
FP002P 0.687 ± 0.031 (17.45 ± 0.79) 0.300 ± 0.020 (7.62 ± 0.51) 0.032 ± 0.002 (0.81 ± 0.05)
FP003P 0.900 ± 0.055 (22.86 ± 1.40) 0.300 ± 0.020 (7.62 ± 0.51) 0.032 ± 0.002 (0.81 ± 0.05)
FP069P 0.516 ± 0.021 (13.11 ± 0.53) 0.225 ± 0.012 (5.72 ± 0.31) 0.032 ± 0.002 (0.81 ± 0.05)
A
1.500 ± 0.125 (1)
(38.10 ± 3.18)
D
B
120
100
80
60
40
20
0
0 50 100 150 200 250 300
DERATING
FP1/2P
FP001P, FP002P, FP003P
% OF RATED POWER
AMBIENT TEMPERATURE °C
120
100
80
60
40
20
0
0 50 100 150 200 250 300
DERATING
3 W
2 W
FP069P
0.6 W
+ 70 °C
+ 25 °C
AMBIENT TEMPERATURE °C
% OF RATED POWER
End of Life - August 2013
FP..P
www.vishay.com Vishay Dale
Revision: 05-Feb-13 3Document Number: 31030
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LIGHTNING PULSE WAVE FORMS
Lightning pulse wave forms are defined by three numbers:
• Maximum time to reach peak voltage level (typically 10 μs)
• Minimum time for voltage to decrease to half value
• The peak voltage level
Three examples are shown below.
10 by 560 µs up to 800 V FCC - Metallic Surge
10 by 1000 µs up to 1000 V REA - Current Surge
10 by 160 µs up to 1500 V FCC - Longitudinal Surge
VOLTS
µs
0
400
800
1200
1600
200 600 1000
VOLTS
VOLTS
µs
0
400
800
1200
1600
200 600 1000
µs
0
400
800
1200
1600
200 600 1000
End of Life - August 2013
FP..P
www.vishay.com Vishay Dale
Revision: 05-Feb-13 4Document Number: 31030
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
These graphs show the relationship value and pulse withstanding voltage for FP1/2P thru FP003P using a 1.0 % resistance shift
after 10 pulses as the figure of merit. The stable operating region of each package is on the right side of the appropriate line.
PACKAGING
GLOBAL MODEL PACKAGING TYPE PACKAGING CODE
LEAD (Pb)-BEARING LEAD (Pb)-FREE
FP1/2P, FP001P, FP069P Strip B8 EK
Tape/reel CJ EA
FP002P, FP003P Strip B8 EK
Tape/reel CH EA
FP069P
FP002PFP003P FP001P
FP1/2P
(1500 µ at 2 kΩ)
10 x 160 µs
VOLTS
1750
1500
1250
1000
750
500
250
0100 300
FP003P
FP002P
FP069P
FP001P
FP1/2P
RESISTANCE (Ω)
FP002P FP069P FP001P
FP1/2P
VOLTS
VOLTS
RESISTANCE (Ω)
RESISTANCE (Ω)
500 700 900 100 300 500 700 900
1750
1500
1250
1000
750
500
250
0
10 x 560 µs
10 x 1000 µs
100 300 500 700 900
1750
1500
1250
1000
750
500
250
0
FP003P
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
