ALUMINUM ELECTROLYTIC CAPACITORS MA 5mmL, Standard, For General Purposes series MT Standard series with 5mm height. Compliant to the RoHS directive (2011/65/EU). Specifications High Temperature MV Long Life MF Low Impedance MA Item MP Bi-polarized Performance Characteristics - 40 to +85C Category Temperature Range Rated Voltage Range 4 to 50V Rated Capacitance Range 0.1 to 470F Rated Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV or 3(A), whichever is greater. Measurement frequency : 120Hz at 20C Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 4 0.35 Figures in ( 6.3 10 16 25 35 50 0.24 (0.30) 0.20 (0.24) 0.16 (0.20) 0.14 (0.18) 0.12 (0.16) 0.10 (0.13) MR series. ) are for Measurement frequency : 120Hz 4 7 15 Rated voltage (V) Z- 25C / Z+20C Impedance ratio Stability at Low Temperature ZT / Z20 (MAX.) Z- 40C / Z+20C 6.3 4 8 10 3 6 16 2 4 25 2 4 35 2 3 50 2 3 Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C. Shelf Life After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Capacitance change tan Leakage current Radial Lead Type Within 20% of the initial capacitance value (MR series & 3 product : Within 25%) 200% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 25V 10F) Sleeve (P.E.T.) 1 d 2 3 4 5 6 7 8 9 10 11 12 UMA 1 E 1 0 0 M D D D Code 3 4 to 8 2 -- Configuration P0.5 D+0.5 MAX. 2 Size code ( 3 : P0.3 ) 1 Capacitance tolerance (20%) Rated capacitance (10F) Rated voltage (25V) L+1MAX. 15 MIN 4 MIN Series name (mm) Type D 3 4 5 6.3 8 P 1.0 1.5 2.0 2.5 2.5 d 0.4 0.45 0.45 0.45 0.45 1 Configuration D * Please refer to page 20 about the end seal configuration. Dimensions Cap.(F) 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 CD 4 to 8 DD 2 In case at 3 units, put 2 as size code. 4 0G V Code 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 Pb-free leadwire Pb-free PET sleeve 3 0.3 x 5 0.4 x 5 0.4 x 5 0.5 x 5 6.3 x 5 0.8 x 5 0.8 x 5 6.3 0J 19 28 33 56 96 145 185 0.3 x 5 0.4 x 5 0.5 x 5 0.5 x 5 6.3 x 5 0.8 x 5 0.8 x 5 10 1A 15 28(21) 37 45 70(68) 110(90) 170 0.5 x 5 0.5 x 5 6.3 x 5 0.8 x 5 0.8 x 5 16 1C 33 41 52(43) 80(76) 135 0.3 x 5 0.4 x 5 0.5 x 5 6.3 x 5 6.3 x 5 0.8 x 5 25 1E 10 23(18) 37 49(43) 58 92(86) 0.3 x 5 0.4 x 5 0.5 x 5 6.3 x 5 6.3 x 5 0.8 x 5 0.8 x 5 35 1V 10 16(12) 27 42 52 70(62) 110 0.3 x 5 0.4 x 5 0.4 x 5 0.5 x 5 6.3 x 5 0.8 x 5 0.8 x 5 50 1H 4 x 5(3 x 5) 1.0(1.0) 4 x 5(3 x 5) 2.0(2.0) 4 x 5(3 x 5) 2.8(2.8) 4 x 5(3 x 5) 4.0(4.0) 4 x 5(3 x 5) 8.4(8.0) 8.4 0.4 x 5 13(10) 15(10) 0.4 x 5 17 18 0.5 x 5 20 29 6.3 x 5 33 46 0.8 x 5 52(48) 62(52) 0.8 x 5 71 80 Case size D x L (mm) Size 3 x 5 is available for capacitors marked. " "/ Size 5 x 5 is available for capacitors marked. " " Size 6.3 x 5 is available for capacitors marked. " " In such a case, M R will be put at 2nd and 3rd digit of type numbering system. Rated ripple Rated ripple current (mArms) at 85C 120Hz ( ) = 3 units and MR series. Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D