SAP-13211400 - Seiko Instruments USA, Inc.

DOCUMENT NUMBER NCD-5DB2-02

SAP-1 Series

Single-Mode

FC HOUSING

TECHNICAL SPECIFICATIONS

Seiko Instruments Inc.

Components Sales Dept.

8, Nakase 1-Chome

Mihama-ku, Chiba-shi, Chiba-ken

261 JAPA N

Telephone : 043-211-1214

-1215

Facsimile : 043-211-8035

SAP-1 Series Single-Mode FC HOUSING

TECHNICAL SPECIFICATIONS

Document Number NCD-5DB2-02

NAE63D01 " SAP-1 Part " May 1986

NCD-5DB2-01 December 1995

NCD-5DB2-02 July 1996

The information contained herein shall not reproduced or disclosed to any third party

without the express written consent of SII.

The Specifications contained herein are subject to change without notice.

SIIis a trademark of Seiko Instruments Inc.

Please address any questions, comments, and suggestions to:

Seiko Instruments USA Inc.

Electronics Components Division

2990 West Lomita Boulevard

Torrance, CA 90505, U.S.A.

Phone: 310-517-7780

Fax: 310-517-7792

Seiko Instruments GmbH

OFC Division

Siemensstraße 9b

D-63263 Neu-Isenburg, Germany

Phone: 06102-297-0

Fax: 06102-297-211

Seiko Instruments (H.K.) Ltd.

Sales Department

4th & 5th Floor, Wyler Center 2

200 Tai Lin Pai Road, Kwai Chung

N.T., Kowloon, Hong Kong

Phone: 852-2421-8611

Fax: 852-2480-5479

Seiko Instruments Taiwan Inc.

Sales Department

5F-1, No.99, Sec. 2, Chung Shan

Rd.

Taipei 104, Taiwan, R.O.C.

Phone: 02-563-5001, 523-5111

Fax: 02-521-9519

Seiko Instruments Singapore pte. Ltd.

2, Marsiling Lane,

Woodlands New Town,

Singapore, 2573, Singapore

Phone: 65-2691370

Fax: 65-2699729

TABLE OF CONTENTS

Section Page

1. PROVISION 1

1.1 Application Limit 1

2. PARTS NUMBER 1

3. GENERAL SPECIFICATIONS 2

3.1 Parts and Materials 2

3.2 Physical Dimensions 2

3.3 General Tolerances 2

4. PACKING 3

Table

Table 1 Parts Number 1

Table 2 Parts and Materials 2

Table 3 General Tolerance 2

Figure

Figure 1 SAP-1 Housing 4

Figure 2 to 15 Part Dimensions 5 to 10

iii

1. PROVISION

1.1 Application Limit

These specifications apply to the SAP-1 Single-Mode FC HOUSING supplied by SII.

2. PARTS NUMBER

Parts Number of the Housing is Shown in Table 1.

Table 1 Parts Number

3. GENERAL SPECIFICATIONS

3.1 Parts and Materials

Parts and the materials are shown in Table 2.

Table 2 Parts and materials

No. Part Name Q'ty Material Notes

①Frame 1 Stainless Steel - -

➁Keyring 1 Beryllium Copper - -

③Washer 1 Phosphor Bronze Nickel Plating

➃Spring 1 Stainless Steel - -

➄Coupling n u t 1 Brass Nickel Plating

⑥Stopper 1 Brass Nickel Plating

⑦Bush 1 Brass Nickel Plating

⑧Holder 1 Brass Nickel Plating

⑨1 Hood (for φ2.0mm) (1) Synthetic Rubber Hood Color , Hood Marking Shows Table 1

⑨2 Hood (for φ2.6mm) (1) Synthetic Rubber Hood Color , Hood Marking Shows Table 1

⑨-3 Hood (for φ3.0mm) (1) Synthetic Rubber Hood Color , Hood Marking Shows Table 1

➉-1 Cap (1) PVC Black

➉-2 Cap (1) Synthetic Rubber with Strings, Black

➉-3 Cap (1) Plastics White

3.2 Physical Dimensions

Figure 1 shows the assembled state of SAP-1.

Figure 2 to 15 show the part dimension.

● In accordance with JIS C5970 F01 type connectors

3.3 General Tolerances

Permissible deviation in dimensions without tolerance indication is in accordance with

JIS B 0405 class m, as shown in Table 3.

Table 3 General tolerance (JIS B 0405 class m)

Basic size step (mm)

Over Under Permissible deviation (mm)

0.5 3

630

30 120

±0.1

±0.2

±0.3

4. PACKING

The product is packed to prevent damage during shippment.

note.1: This drawing does not include Caps. Unit: mm

Figure 1 SAP-1 HOUSING

Unit: mm

Figure 2 ①Frame

Unit: mm

Figure 3 ➁Keyring

Unit: mm

Figure 4 ③Washer

Unit: mm

Figure 5 ➃Spring

Unit: mm

Figure 6 ➄Coupling nut

Unit: mm

Figure 7 ⑥Stopper

Unit: mm

Figure 8 ⑦Bush

Unit: mm

Figure 9 ⑧Holder

Unit: mm

Figure 10 ⑨-1 Hood (for φ2.0mm)

Unit: mm

Figure 11 ⑨-2 Hood (for φ2.6mm)

without Marking with making Unit: mm

Figure 12 ⑨-3 Hood (for φ3.0mm)

Unit: mm

Figure 13 ➉-1 Cap

Unit: mm

Figure 14 ➉-2 Cap

Unit: mm

Figure 15 ➉-3 Cap