DISCRETE SEMICONDUCTORS DATA SHEET PDZ-B series Voltage regulator diodes Product specification Supersedes data of 2002 Feb 18 2004 Mar 22 Philips Semiconductors Product specification Voltage regulator diodes PDZ-B series FEATURES PINNING * Total power dissipation: max. 400 mW , PIN * Small plastic package suitable for surface mounted design 1 2 * Wide variety of voltage ranges: nominal 2.4 to 36 V (E24 range) * Tolerance approximately 2%. handbook, halfpage * General voltage regulation. cathode anode 1 APPLICATIONS DESCRIPTION 2 Top view MAM387 The marking bar indicates the cathode. DESCRIPTION Fig.1 Low-power general purpose voltage regulator diodes in a small plastic SMD SOD323 (SC-76) package. Simplified outline (SOD323; SC-76) and symbol. MARKING TYPE NUMBER MARKING CODE TYPE NUMBER MARKING CODE TYPE NUMBER MARKING CODE TYPE NUMBER MARKING CODE PDZ2.4B Z0 PDZ5.1B Z8 PDZ11B ZG PDZ24B ZQ PDZ2.7B Z1 PDZ5.6B Z9 PDZ12B ZH PDZ27B ZR PDZ3.0B Z2 PDZ6.2B ZA PDZ13B ZJ PDZ30B ZS PDZ3.3B Z3 PDZ6.8B ZB PDZ15B ZK PDZ33B ZT PDZ3.6B Z4 PDZ7.5B ZC PDZ16B ZL PDZ36B ZU PDZ3.9B Z5 PDZ8.2B ZD PDZ18B ZM PDZ4.3B Z6 PDZ9.1B ZE PDZ20B ZN PDZ4.7B Z7 PDZ10B ZF PDZ22B ZP ORDERING INFORMATION TYPE NUMBER PDZ2.4B to PDZ36B 2004 Mar 22 PACKAGE NAME - DESCRIPTION plastic surface mounted package; 2 leads 2 VERSION SOD323 Philips Semiconductors Product specification Voltage regulator diodes PDZ-B series LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. - IF continuous forward current IZSM non-repetitive peak reverse current tp = 100 s; square wave; Tamb = 25 C prior to surge Ptot total power dissipation Tamb = 25 C; note 1; see Fig.2 Tstg Tj UNIT 200 mA see Table 2 - 400 mW storage temperature -65 +150 C junction temperature - 150 C Note 1. Device mounted on a printed-circuit board measuring 11 x 25 x 1.6 mm. THERMAL CHARACTERISTICS SYMBOL PARAMETER CONDITIONS Rth(j-s) thermal resistance from junction to soldering point Rth(j-a) thermal resistance from junction to ambient note 1 Note 1. Device mounted on a printed-circuit board measuring 11 x 25 x 1.6 mm. 2004 Mar 22 3 VALUE UNIT 130 K/W 340 K/W Philips Semiconductors Product specification Voltage regulator diodes PDZ-B series CHARACTERISTICS Table 1 Total series Tj = 25 C unless otherwise specified. SYMBOL PARAMETER VF forward voltage IR reverse current PDZ2.4B PDZ2.7B PDZ3.0B PDZ3.3B PDZ3.6B PDZ3.9B PDZ4.3B PDZ4.7B PDZ5.1B PDZ5.6B PDZ6.2B PDZ6.8B PDZ7.5B PDZ8.2B PDZ9.1B PDZ10B PDZ11B PDZ12B PDZ13B PDZ15B PDZ16B PDZ18B PDZ20B PDZ22B PDZ24B PDZ27B PDZ30B PDZ33B PDZ36B 2004 Mar 22 CONDITIONS 4 MAX. UNIT IF = 10 mA; see Fig.3 IF = 100 mA; see Fig.3 0.9 1.1 V V VR = 1 V VR = 1 V VR = 1 V VR = 1 V VR = 1 V VR = 1 V VR = 1 V VR = 1 V VR = 1.5 V VR = 2.5 V VR = 3 V VR = 3.5 V VR = 4 V VR = 5 V VR = 6 V VR = 7 V VR = 8 V VR = 9 V VR = 10 V VR = 11 V VR = 12 V VR = 13 V VR = 15 V VR = 17 V VR = 19 V VR = 21 V VR = 23 V VR = 25 V VR = 27 V 50 20 10 5 5 3 3 2 2 1 500 500 500 500 500 100 100 100 100 50 50 50 50 50 50 50 50 50 50 A A A A A A A A A A nA nA nA nA nA nA nA nA nA nA nA nA nA nA nA nA nA nA nA This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in _white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here inThis text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ... 5 TEMP. COEFF. SZ (mV/K) at IZ = 5 mA (see Figs 4 and 5) DIODE CAP. Cd (pF) at f = 1 MHz; VR = 0 NON-REPETITIVE PEAK REVERSE CURRENT IZSM (A) at tp = 100 s; Tamb = 25 C MAX. MAX. at IZ (mA) MAX. at IZ (mA) TYP. MAX. MAX. 2.43 2.69 2.85 3.32 3.60 3.89 4.17 4.55 4.96 5.48 6.06 6.65 7.28 8.02 8.85 9.77 10.78 11.74 12.91 14.34 15.85 17.56 19.52 21.54 23.72 26.19 29.19 32.15 35.07 2.63 2.91 3.07 3.53 3.85 4.16 4.48 4.75 5.20 5.73 6.33 6.93 7.60 8.36 9.23 10.21 11.22 12.24 13.49 14.98 16.51 18.35 20.39 22.47 24.78 27.53 30.69 33.79 36.87 1000 1000 1000 1000 500 500 600 600 250 100 80 60 60 60 60 60 60 80 80 80 80 80 100 100 120 150 200 250 300 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 100 100 95 95 90 90 90 90 60 50 50 40 10 10 10 10 10 10 10 15 20 20 20 25 30 40 40 40 60 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 -1.6 -2.0 -2.1 -2.4 -2.4 -2.5 -2.5 -1.4 0.3 1.9 2.7 3.4 4.0 4.6 5.5 6.4 7.4 8.4 9.4 11.4 12.4 14.4 16.4 18.4 20.4 23.4 26.6 29.7 33.0 450 440 425 410 390 370 350 325 300 275 250 215 170 150 120 110 108 105 103 99 97 93 88 84 80 73 66 60 59 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 5.5 5.5 5.5 5.5 3.5 3.5 3.5 3.5 3.0 3.0 2.5 2.0 1.5 1.5 1.5 1.3 1.3 1.0 1.0 0.9 0.8 Product specification MIN. PDZ-B series PDZ2.4B PDZ2.7B PDZ3.0B PDZ3.3B PDZ3.6B PDZ3.9B PDZ4.3B PDZ4.7B PDZ5.1B PDZ5.6B PDZ6.2B PDZ6.8B PDZ7.5B PDZ8.2B PDZ9.1B PDZ10B PDZ11B PDZ12B PDZ13B PDZ15B PDZ16B PDZ18B PDZ20B PDZ22B PDZ24B PDZ27B PDZ30B PDZ33B PDZ36B DIFFERENTIAL RESISTANCE rdif () Philips Semiconductors TYPE NUMBER WORKING VOLTAGE VZ (V) at IZ = 5 mA Voltage regulator diodes 2004 Mar 22 Table 2 Per type Tj = 25 C unless otherwise specified. Philips Semiconductors Product specification Voltage regulator diodes PDZ-B series GRAPHICAL DATA MBK245 500 MBG781 300 handbook, halfpage handbook, halfpage Ptot (mW) IF (mA) 400 200 300 200 100 100 0 0.6 0 0 50 100 150 200 Tamb (C) 0.8 1 VF (V) Tj = 25 C. Fig.3 Forward current as a function of forward voltage; typical values. Fig.2 Power derating curve. MGL273 MGL274 0 10 handbook, halfpage handbook, halfpage 12 SZ (mV/K) SZ (mV/K) 4.3 11 10 -1 9.1 5 3.9 8.2 7.5 6.8 3.6 -2 6.2 5.6 5.1 0 3.3 4.7 3.0 2.4 2.7 -3 0 20 40 IZ (mA) -5 60 0 4 PDZ2.4B to PDZ4.3B. Tj = 25 C to 150 C. PDZ4.7B to PDZ12B. Tj = 25 C to 150 C. Fig.4 Fig.5 Temperature coefficient as a function of working current; typical values. 2004 Mar 22 6 8 12 16 IZ (mA) 20 Temperature coefficient as a function of working current; typical values. Philips Semiconductors Product specification Voltage regulator diodes PDZ-B series PACKAGE OUTLINE Plastic surface mounted package; 2 leads SOD323 A D E X v HD M A Q 1 2 bp A A1 (1) c Lp detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 max bp c D E HD Lp Q v mm 1.1 0.8 0.05 0.40 0.25 0.25 0.10 1.8 1.6 1.35 1.15 2.7 2.3 0.45 0.15 0.25 0.15 0.2 Note 1. The marking bar indicates the cathode OUTLINE VERSION SOD323 2004 Mar 22 REFERENCES IEC JEDEC JEITA SC-76 7 EUROPEAN PROJECTION ISSUE DATE 99-09-13 03-12-17 Philips Semiconductors Product specification Voltage regulator diodes PDZ-B series DATA SHEET STATUS LEVEL DATA SHEET STATUS(1) PRODUCT STATUS(2)(3) Development DEFINITION I Objective data II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Production This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2004 Mar 22 8 Philips Semiconductors - a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. SCA76 (c) Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R76/05/pp9 Date of release: 2004 Mar 22 Document order number: 9397 750 12615