BLP35M805Z - AMPLEON - Datasheet.Directory

1. Product profile

1.1 General description

5 W LDMOS power transistor for broadcast, ISM and A&D applications at frequencies

from HF to 3500 MHz.

The BLP35M805 driver is designed for high power CW applications and is assembled in a

high performance thermally enhanced plastic package.

1.2 Features and benefits

High efficiency

High power gain

Excellent ruggedness

Excellent thermal stability

Integrated ESD protection

Designed for broadband operation (HF to 3500 MHz)

Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances

(RoHS)

1.3 Applications

Broadcast, ISM and A&D applications in the frequency range from HF to 3500 MHz

BLP35M805

Power LDMOS transistor

Rev. 1 — 24 February 2016 Product data sheet

Table 1. Typical performance

RF performance at VDS = 32 V; IDq =50mA; T

case =25



C in a class-AB application circuit.

Test signal f IDq VDS PL(AV) GpD

(MHz) (mA) (V) (W) (dB) (%)

CW 2450 50 32 5 20 50

3500 100 32 5 9.6 33

Product data sheet Rev. 1 — 24 February 2016 2 of 11

BLP35M805

Power LDMOS transistor

2. Pinning information

[1] To be used in single ended applications only.

[2] Connected to flange.

3. Ordering information

4. Limiting values

5. Thermal characteristics

Table 2. Pinning

Pin Description Simplified outline Graphic symbol [1]

1, 2, 5, 6, 7, 8, 9, 10, 11,

12, 15, 16

n.c.

3, 4 gate

13, 14 drain

exposed die-pad source [2]

16 9

Transparent top view

3, 4

exposed

die-pad

13, 14

aaa-017948

Table 3. Ordering information

Type number Package

Name Description Version

BLP35M805 HVSON16 plastic thermal enhanced very thin small outline

package; no leads;16 terminals; body 4 60.85 mm

SOT1371-1

Table 4. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

VDS drain-source voltage - 65 V

VGS gate-source voltage 0.5 +13 V

Tstg storage temperature 65 +150 C

Tjjunction temperature - 225 C

Table 5. Thermal characteristics

Symbol Parameter Conditions Typ Unit

Rth(j-c) thermal resistance from junction to case Tcase =80C; PL=1W 6.4 K/W

Product data sheet Rev. 1 — 24 February 2016 3 of 11

BLP35M805

Power LDMOS transistor

6. Characteristics

Table 6. DC characteristics

Tj = 25



C; unless otherwise specified.

Symbol Parameter Conditions Min Typ Max Unit

V(BR)DSS drain-source breakdown voltage VGS =0V; I

D=0.09mA 65 - - V

VGS(th) gate-source threshold voltage VDS = 10 V; ID=9mA 1.5 1.9 2.3 V

IDSS drain leakage current VGS =0V; V

DS =28V 1.4 - +1.4 A

IDSX drain cut-off current VGS =V

GS(th) + 3.75 V - 1.6 - A

IGSS gate leakage current VGS =11V; V

DS =0V - - 140 nA

gfs forward transconductance VDS =10V; I

D= 9 mA - 80 - mS

RDS(on) drain-source on-state resistance VGS =V

GS(th) + 3.75 V;

VDS =10V; I

D=315mA

-2-

Table 7. RF characteristics

A derivative functional RF test is performed in production. The performance as mentioned below is

verified by design and characterization in an Ampleon class-AB application board.

Test signal: pulsed CW;



= 10%; tp = 100



s; VDS = 28 V; IDq = 55 mA; Tcase = 25



C; f = 2140 MHz

Symbol Parameter Conditions Min Typ Max Unit

Gppower gain PL(AV) = 0.75 W 17 18 - dB

Ddrain efficiency PL(AV) = 0.75 W 15 17 - %

PL(1dB) output power at 1 dB gain compression 5 - - W

Product data sheet Rev. 1 — 24 February 2016 4 of 11

BLP35M805

Power LDMOS transistor

7. Application information

7.1 Application circuit

Printed-Circuit Board (PCB): Rogers RO4350B; r= 3.5; thickness = 0.508 mm; thickness copper

plating = 35 m.

See Table 8 for list of components.

Fig 1. Component layout

Table 8. List of components

See Figure 1 for component layout.

Component Description Value Remarks

C1, C2, C3, C4 multilayer ceramic chip capacitor 13 pF ATC 100A

C5 multilayer ceramic chip capacitor 2.2 pF ATC 100A

C6 multilayer ceramic chip capacitor 1.4 pF ATC 100A

C7, C8 multilayer ceramic chip capacitor 1 F, 50 V Murata:

GRM32RR71H105KA01L

C9 electrolytic capacitor 10 F, 63 V

R1 chip resistor 5.1 SMD 0805

C1 C2

40 mm

38.1 mm

amp00000

Product data sheet Rev. 1 — 24 February 2016 5 of 11

BLP35M805

Power LDMOS transistor

7.2 Graphical data

VDS =32V; I

Dq =50mA.

(1) f = 2400 MHz

(2) f = 2450 MHz

(3) f = 2500 MHz

VDS =32V; I

Dq =50mA.

(1) f = 2400 MHz

(2) f = 2450 MHz

(3) f = 2500 MHz

Fig 2. Power gain and drain efficiency as function of

output power; typical values

Fig 3. Power gain and drain efficiency as function of

output power; typical values

VDS =32V; I

Dq =50mA.

(1) f = 2400 MHz

(2) f = 2450 MHz

(3) f = 2500 MHz

VDS =32V; I

Dq =50mA; P

L=5W.

Fig 4. Output power as a function of input power;

typical values

Fig 5. Power gain as a function of frequency; typical

values

aaa-020661

25 27.5 30 32.5 35 37.5 40

11 10

13 20

15 30

17 40

19 50

21 60

PL (dBm)

(dB)(dB)(dB)

ηD

(%)(%)(%)

(1)(1)(1)

(2)(2)(2)

(3)(3)(3)

(1)(1)(1)

(2)(2)(2)

(3)(3)(3)

ηD

aaa-020662

0 2 4 6 8 10

11 10

13 20

15 30

17 40

19 50

21 60

PL (W)

(dB)(dB)(dB)

ηD

(%)(%)(%)

(1)(1)(1)

(2)(2)(2)

(3)(3)(3)

(1)(1)(1)

(2)(2)(2)

(3)(3)(3)

ηD

aaa-020663

10 15 20 25 30

Pi (dBm)

(dBm)(dBm)(dBm)

(1)(1)(1)

(2)(2)(2)

(3)(3)(3)

aaa-020664

2300 2350 2400 2450 2500 2550 2600

f (MHz)

(dB)(dB)(dB)

Product data sheet Rev. 1 — 24 February 2016 6 of 11

BLP35M805

Power LDMOS transistor

8. Test information

8.1 Ruggedness in class-AB operation

The BLP35M805 is capable of withstanding a load mismatch corresponding to

VSWR = 10 : 1 through all phases under the following conditions: VDS =32V;

IDq =50mA; P

L=5W.

8.2 Impedance information

[1] ZS and ZL defined in Figure 6.

Table 9. Typical impedance

Measured load-pull data. Typical values unless otherwise specified. IDq =55mA; V

DS =28V.

f ZS [1] ZL [1]

(MHz) () ()

2400 1.3 j5.2 4.2 + j1.3

2450 1.3 j5.6 4.1 + j0.7

2500 1.3 j6.0 4.0 + j0.1

Fig 6. Definition of transistor impedance

001aag189

drain

gate

Product data sheet Rev. 1 — 24 February 2016 7 of 11

BLP35M805

Power LDMOS transistor

9. Package outline

Fig 7. Package outline SOT1371-1 (HVSON16)

0.35

0.30

0.25

References

Outline

version

European

projection Issue date

IEC JEDEC JEITA

SOT1371-1 MO-229

sot1371-1_po

14-05-19

14-08-26

Unit

max

nom

min

1.00

0.85

0.80

Dimensions (mm are the original dimensions)

HVSON16: plastic thermal enhanced very thin small outline package; no leads;

16 terminals; body 4 x 6 x 0.85 mm SOT1371-1

0.2

5.2

5.1

5.0

6.1

6.0

5.9

4.1

4.0

3.9

bCD

(1) DhE(1) Eh

2.0

1.9

1.8

0.650.8

0.1

e3v

0.15.34.0

0.05

terminal 1

index area

terminal 1

index area

05 mm

scale

B AD

detail X

16 9

bACBv

1/2 e

0.5

0.4

0.3

0.70

0.65

0.60

0.05

0.03

0.00

Note

1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.

Product data sheet Rev. 1 — 24 February 2016 8 of 11

BLP35M805

Power LDMOS transistor

10. Handling information

11. Abbreviations

12. Revision history

CAUTION

This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling

electrostatic sensitive devices.

Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or

equivalent standards.

Table 10. Abbreviations

Acronym Description

A&D Aerospace and Defense

CW Continuous Wave

ESD ElectroStatic Discharge

HF High Frequency

ISM Industrial, Scientific and Medical

LDMOS Laterally Diffused Metal-Oxide Semiconductor

SMD Surface Mounted Device

VSWR Voltage Standing-Wave Ratio

Table 11. Revision history

Document ID Release date Data sheet status Change notice Supersedes

BLP35M805 v.1 20160224 Product data sheet - -

Product data sheet Rev. 1 — 24 February 2016 9 of 11

BLP35M805

Power LDMOS transistor

13. Legal information

13.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term ‘short data sheet’ is explained in section “Definitions”.

[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status

information is available on the Internet at URL http://www.ampleon.com.

13.2 Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Ampleon does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is intended

for quick reference only and should not be relied upon to contain detailed and

full information. For detailed and full information see the relevant full data

sheet, which is available on request via the local Ampleon sales office. In

case of any inconsistency or conflict with the short data sheet, the full data

sheet shall prevail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Ampleon and its customer, unless Ampleon and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be valid

in which the Ampleon product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

13.3 Disclaimers

Limited warranty and liability — Information in this document is believed to

be accurate and reliable. However, Ampleon does not give any

representations or warranties, expressed or implied, as to the accuracy or

completeness of such information and shall have no liability for the

consequences of use of such information. Ampleon takes no responsibility for

the content in this document if provided by an information source outside of

Ampleon.

In no event shall Ampleon be liable for any indirect, incidental, punitive,

special or consequential damages (including - without limitation - lost profits,

lost savings, business interruption, costs related to the removal or

replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Ampleon’s aggregate and cumulative liability towards customer

for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of Ampleon.

Right to make changes — Ampleon reserves the right to make changes to

information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Suitability for use — Ampleon products are not designed, authorized or

warranted to be suitable for use in life support, life-critical or safety-critical

systems or equipment, nor in applications where failure or malfunction of an

Ampleon product can reasonably be expected to result in personal injury,

death or severe property or environmental damage. Ampleon and its

suppliers accept no liability for inclusion and/or use of Ampleon products in

such equipment or applications and therefore such inclusion and/or use is at

the customer’s own risk.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Ampleon makes no representation

or warranty that such applications will be suitable for the specified use without

further testing or modification.

Customers are responsible for the design and operation of their applications

and products using Ampleon products, and Ampleon accepts no liability for

any assistance with applications or customer product design. It is customer’s

sole responsibility to determine whether the Ampleon product is suitable and

fit for the customer’s applications and products planned, as well as for the

planned application and use of customer’s third party customer(s). Customers

should provide appropriate design and operating safeguards to minimize the

risks associated with their applications and products.

Ampleon does not accept any liability related to any default, damage, costs or

problem which is based on any weakness or default in the customer’s

applications or products, or the application or use by customer’s third party

customer(s). Customer is responsible for doing all necessary testing for the

customer’s applications and products using Ampleon products in order to

avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). Ampleon does not accept any

liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those given in

the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — Ampleon products are sold

subject to the general terms and conditions of commercial sale, as published

at http://www.ampleon.com/terms, unless otherwise agreed in a valid written

individual agreement. In case an individual agreement is concluded only the

terms and conditions of the respective agreement shall apply. Ampleon

hereby expressly objects to applying the customer’s general terms and

conditions with regard to the purchase of Ampleon products by customer.

No offer to sell or license — Nothing in this document may be interpreted or

construed as an offer to sell products that is open for acceptance or the grant,

conveyance or implication of any license under any copyrights, patents or

other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Document status[1][2] Product status[3] Definition

Objective [short] data sheet Development This document contains data from the objective specification for product development.

Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.

Product [short] data sheet Production This document contains the product specification.

Product data sheet Rev. 1 — 24 February 2016 10 of 11

BLP35M805

Power LDMOS transistor

Non-automotive qualified products — Unless this data sheet expressly

states that this specific Ampleon product is automotive qualified, the product

is not suitable for automotive use. It is neither qualified nor tested in

accordance with automotive testing or application requirements. Ampleon

accepts no liability for inclusion and/or use of non-automotive qualified

products in automotive equipment or applications.

In the event that customer uses the product for design-in and use in

automotive applications to automotive specifications and standards, customer

(a) shall use the product without Ampleon’ warranty of the product for such

automotive applications, use and specifications, and (b) whenever customer

uses the product for automotive applications beyond Ampleon’ specifications

such use shall be solely at customer’s own risk, and (c) customer fully

indemnifies Ampleon for any liability, damages or failed product claims

resulting from customer design and use of the product for automotive

applications beyond Ampleon’ standard warranty and Ampleon’ product

specifications.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

13.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks

are the property of their respective owners.

Any reference or use of any ‘NXP’ trademark in this document or in or on the

surface of Ampleon products does not result in any claim, liability or

entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of

the NXP group of companies and any reference to or use of the ‘NXP’

trademarks will be replaced by reference to or use of Ampleon’s own

trademarks.

14. Contact information

For more information, please visit: http://www.ampleon.com

For sales office addresses, please visit: http://www.ampleon.com/sales

BLP35M805

Power LDMOS transistor

For more information, please visit: http://www.ampleon.com

For sales office addresses, please visit: http://www.ampleon.com/sales

Date of release: 24 February 2016

Document identifier: BLP35M805

Please be aware that important notices concerning this document and the product(s)

described herein, have been included in section ‘Legal information’.

15. Contents

1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 General description . . . . . . . . . . . . . . . . . . . . . 1

1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1

1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2

3 Ordering information . . . . . . . . . . . . . . . . . . . . . 2

4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2

5 Thermal characteristics . . . . . . . . . . . . . . . . . . 2

6 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3

7 Application information. . . . . . . . . . . . . . . . . . . 4

7.1 Application circuit . . . . . . . . . . . . . . . . . . . . . . . 4

7.2 Graphical data . . . . . . . . . . . . . . . . . . . . . . . . . 5

8 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 6

8.1 Ruggedness in class-AB operation . . . . . . . . . 6

8.2 Impedance information . . . . . . . . . . . . . . . . . . . 6

9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7

10 Handling information. . . . . . . . . . . . . . . . . . . . . 8

11 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 8

12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 8

13 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9

13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9

13.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

13.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10

14 Contact information. . . . . . . . . . . . . . . . . . . . . 10

15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11