Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Revised April 2005 74VHC244 Octal Buffer/Line Driver with 3-STATE Outputs General Description Features The VHC244 is an advanced high speed CMOS octal bus buffer fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The VHC244 is a non-inverting 3-STATE buffer having two active-LOW output enables. These devices are designed to be used as 3-STATE memory address drivers, clock drivers, and bus oriented transmitter/receivers. High Speed: tPD 3.9ns (typ) at VCC High noise immunity: VNIH VNIL 5V 28% VCC (min) Power down protection is provided on all inputs Low noise: VOLP 0.6V (typ) Low power dissipation: ICC 4 PA (max) @ TA 25qC Pin and function compatible with 74HC244 An input protection circuit ensures that 0V to 7V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5V to 3V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages. Ordering Code: Order Number Package Number 74VHC244M 74VHC244SJ 74VHC244MTC 74VHC244N Package Description M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide M20D Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide MTC20 N20A 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Pb-Free package per JEDEC J-STD-020B. Logic Symbol Connection Diagram IEEE/IEC (c) 2005 Fairchild Semiconductor Corporation DS011522 www.fairchildsemi.com 74VHC244 Octal Buffer/Line Driver with 3-STATE Outputs November 1992 74VHC244 Pin Descriptions Pin Names Description OE1, OE2 3-STATE Output Enable Inputs I0-I7 Inputs O0-O7 3-STATE Outputs Truth Tables Inputs Outputs OE1 In (Pins 12, 14, 16, 18) L L L L H H H X Z Inputs Outputs OE2 In (Pins 3, 5, 7, 9) L L L L H H H X Z H HIGH Voltage Level L LOW Voltage Level I Immaterial Z High Impedance www.fairchildsemi.com 2 Recommended Operating Conditions (Note 2) 0.5V to 7.0V 0.5V to 7.0V 0.5V to VCC 0.5V 20 mA r20 mA r25 mA r75 mA 65qC to 150qC Supply Voltage (VCC ) DC Input Voltage (VIN) DC Output Voltage (VOUT) Input Diode Current (IIK) Output Diode Current (IOK) DC Output Current (IOUT) DC VCC /GND Current (ICC ) Storage Temperature (TSTG) 2.0V to 5.5V 0V to 5.5V Output Voltage (VOUT) 0V to VCC 40qC to 85qC Operating Temperature (TOPR) Input Rise and Fall Time (tr, tf) Lead Temperature (TL) VCC 3.3V r 0.3V 0 ns/V a 100 ns/V VCC 5.0V r 0.5V 0 ns/V a 20 ns/V Note 1: Absolute Maximum Ratings are values beyond which the device may be damaged or have its useful life impaired. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside databook specifications. 260qC (Soldering, 10 seconds) Supply Voltage (VCC) Input Voltage (VIN) Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VCC Parameter (V) HIGH Level Input Voltage VIL VOH VOL TA Max 40qC to 85qC Min 2.0 1.5 1.5 0.7 VCC 0.7 VCC Max 2.0 0.5 0.5 0.3 VCC 0.3 VCC HIGH Level 2.0 1.9 2.0 1.9 Output Voltage 3.0 2.9 3.0 2.9 4.5 4.4 4.5 3.0 2.58 2.48 4.5 3.94 3.80 2.0 Output Voltage Units V VIN V ICC Quiescent Supply Current 50 PA 4.4 0.0 IOH V 0.1 0.1 IOH VIN V VIH IOL 4 mA 8 mA 50 PA 3.0 0.0 0.1 0.1 0.0 0.1 0.1 3.0 0.36 0.44 4.5 0.36 0.44 or VIL 5.5 r0.25 r2.5 PA VIN 0 5.5 r0.1 r1.0 PA VIN 5.5V or GND 5.5 4.0 40.0 PA VIN VCC or GND V Off-State Current Input Leakage Current VIH IOH or VIL 4.5 3-STATE Output IIN Conditions V 3.0 5.5 LOW Level IOZ 25qC Typ 3.0 5.5 LOW Level Input Voltage TA Min VOUT IOL 4 mA IOL 8 mA VIH or VIL VCC or GND Noise Characteristics Symbol VOLP (Note 3) VOLV (Note 3) Parameter Quiet Output Maximum VCC TA 25qC Units Conditions (V) Typ Limits 5.0 0.6 0.9 V CL 50 pF 5.0 0.6 0.9 V CL 50 pF 5.0 3.5 V CL 50 pF 5.0 1.5 V CL 50 pF Dynamic VOL Quiet Output Minimum Dynamic VOL VIHD Minimum HIGH Level (Note 3) Dynamic Input Voltage VILD Maximum HIGH Level (Note 3) Dynamic Input Voltage Note 3: Parameter guaranteed by design. 3 www.fairchildsemi.com 74VHC244 Absolute Maximum Ratings(Note 1) 74VHC244 AC Electrical Characteristics Symbol Parameter tPLH Propagation Delay tPHL Time VCC (V) TA Min 3.3 r 0.3 5.0 r 0.5 tPZL 3-STATE Output tPZH Enable Time 3.3 r 0.3 5.0 r 0.5 25qC TA 40qC to 85qC Typ Max Min Max 5.8 8.4 1.0 10.0 8.3 11.9 1.0 13.5 3.9 5.5 1.0 6.5 5.4 7.5 1.0 8.5 6.6 10.6 1.0 12.5 9.1 14.1 1.0 16.0 4.7 7.3 1.0 8.5 6.2 9.3 1.0 10.5 tPLZ 3-STATE Output 3.3 r 0.3 10.3 14.0 1.0 16.0 tPHZ Disable Time 5.0 r 0.5 6.7 9.2 1.0 10.5 tOSLH Output to Output 3.3 r 0.3 1.5 1.5 tOSHL Skew 5.0 r 0.5 1.0 1.0 CIN Input Capacitance 10 10 COUT Output Capacitance CPD Power Dissipation Capacitance Note 4: Parameter guaranteed by design. tOSLH Conditions ns ns ns RL 1 k: ns ns RL 1 k: CL 15 pF CL 50 pF CL 15 pF CL 50 pF CL 15 pF CL 50 pF CL 15 pF CL 50 pF CL 50 pF CL 50 pF CL 50 pF CL 50 pF ns (Note 4) pF VCC Open 6 pF VCC 5.0V 19 pF (Note 5) 4 |tPLHmax tPLHmin|; tOSHL Units |tPHLmax tPHLmin|. Note 5: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (OPR.) CPD * VCC * fIN ICC/8 (per bit). www.fairchildsemi.com 4 74VHC244 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package Number M20B 5 www.fairchildsemi.com 74VHC244 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D www.fairchildsemi.com 6 74VHC244 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC20 7 www.fairchildsemi.com 74VHC244 Octal Buffer/Line Driver with 3-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N20A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 8 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com