49BC / EC Vishay Sprague Solid Tantalum Chip Capacitors Conformal Coated FEATURES * Eight standard case codes, "pad compatible" with MIL-C-55365/4 (CWR06). * High volumetric efficiency (Up to 200,000 CV per cubic inch). * Low profile, conformally-coated construction. * 100% low impedance power burn-in at + 85C. * Low ESR in high frequency applications. * Packaging in 50 unit 'Blister-Pack' trays or 8mm or 12mm tape and reel. * Gold plated or solder dipped terminations. PERFORMANCE CHARACTERISTICS Voltage Rating: 4 WVDC to 50 WVDC. Operating Temperature: - 55C to + 85C. (To + 125C with voltage derating.) Conformally Coated: Fluoroelastomer coating. Capacitance Range: 0.1F to 220F. Capacitance Tolerance: 20%, 10% standard. 5% available as special Automatic Screening: Capacitance, DF and DCL. DIMENSIONS in inches [millimeters] Negative Termination Positive Termination Top View (See Note 1) W L 0.005 [0.127] Typ. H B S B Side View 0.015 [0.381] Max. Weld Stub CASE CODE LENGTH L WIDTH W HEIGHT H SPACING TYPICAL S PAD WIDTH B TYPICAL WEIGHT (Grams) B 0.100 0.015 [2.54 0.381] 0.050 0.015 [1.27 0.381] 0.050 0.015 [1.27 0.381] 0.040 [1.02] 0.030 0.005 [0.76 0.127] 0.02 L 0.150 0.015 [3.81 0.381] 0.050 0.015 [1.27 0.381] 0.050 0.015 [1.27 0.381] 0.090 [2.29] 0.030 0.005 [0.76 0.127] 0.03 U 0.200 0.015 [5.08 0.381] 0.050 0.015 [1.27 0.381] 0.050 0.015 [1.27 0.381] 0.140 [3.55] 0.030 0.005 [0.76 0.127] 0.04 E 0.150 0.015 [3.81 0.381] 0.100 0.015 [2.54 0.381] 0.050 0.015 [1.27 0.381] 0.090 [2.29] 0.030 0.005 [0.76 0.127] 0.07 C 0.200 0.015 [5.08 0.381] 0.100 0.015 [2.54 0.381] 0.050 0.015 [1.27 0.381] 0.140 [3.55] 0.030 0.005 [0.76 0.127] 0.09 H 0.220 0.015 [5.59 0.381] 0.135 0.015 [3.43 0.381] 0.070 0.015 [1.78 0.381] 0.160 [4.06] 0.030 0.005 [0.76 0.127] 0.21 I 0.265 0.015 [6.73 0.381] 0.110 0.015 [2.79 0.381] 0.110 0.015 [2.79 0.381] 0.165 [4.19] 0.050 0.005 [1.27 0.127] 0.33 P 0.285 0.015 [7.25 0.381] 0.150 0.015 [3.81 0.381] 0.110 0.015 [2.79 0.381] 0.185 [4.70] 0.050 0.005 [1.27 0.127] 0.50 Notes: 1. For polarity identification, when chip is in mounting position, bare metal clip and weld stub are positive. The top surface of the negative terminal is blue. 2. Anode Riser (weld stub) may extend case size length dimension by 0.015" [0.381] maximum. 3. Dimensions given are for gold plated terminations. For solder dipped terminations, add 0.015" [0.381] to dimension tolerances. 4. Spacing dimension is average distance between chip mounting terminations and therefore maximum distance between mounting pads on substrate. www.vishay.com 108 For technical questions, contact tantalum@vishay.com Document Number 40013 Revision 05-Jul-02 49BC / EC Vishay Sprague RATINGS AND CASE CODES 4V 6V 20 V 15 V 10 V 25 V 35 V 50 V F Picofarad Code Std. Ext. Std. Ext. Std. Ext. Std. Ext. Std. Ext. Std. Ext. Std. Ext. Std. Ext. 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 120 150 220 104 154 224 334 474 684 105 155 225 335 475 685 106 156 226 336 476 686 107 127 157 227 B B B B B B B B B L L U E C H H I I P -- -- -- -- -- -- -- -- -- -- -- -- B B B L U E C H H H I I P B B B B B B B B L L U E C H H I I P -- -- -- -- -- -- -- -- -- -- -- -- B B B L U E C H H H I I P -- B B B B B B B L L U E C H H I I P -- -- -- -- -- -- -- -- -- -- -- -- B B B L U E C H H H I P -- -- -- B B B B B B L L U E C H H I I P -- -- -- -- -- -- -- -- -- -- -- -- B B B L U E C H H H I P -- -- -- -- B B B B B L L U E C H H I I P -- -- -- -- -- -- -- -- -- -- -- -- -- B B L U E C H H H I P -- -- -- -- -- B B B B L L U E C H H I I P -- -- -- -- -- -- -- -- -- -- -- -- B -- B L U E C H H H I P -- -- -- -- -- -- B B B L L U E C H H I P -- -- -- -- -- -- -- -- -- -- -- -- -- -- B -- L U E C H H I P -- -- -- -- -- -- -- -- B B L L U E C H H I P -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- STANDARD RATINGS - TYPE 49BC NOMINAL CAPACITANCE (F) Max. DCL (A) @ CASE CODE + 25C + 85C + 125C Max. DF 120 Hz (%) Max. ESR 100kHz (Ohms) 4 WVDC @ - 55C to + 85C, SURGE = 5 V . . . 2.7 WVDC @ + 125C, SURGE = 3.4 V 2.2 4.7 6.8 10 15 33 68 100 1.5 3.3 4.7 6.8 10 22 47 68 6.0 B 0.5 5.0 7.0 0.5 5.0 7.0 6.0 L 5.0 7.0 6.0 U 0.5 7.0 8.0 E 0.5 5.0 C 0.6 6.0 8.0 8.0 H 1.4 14.0 18.0 8.0 I 2.8 28.0 35.0 10.0 P 4.0 40.0 48.0 10.0 6 WVDC @ - 55C to + 85C, SURGE = 8 V . . . 4 WVDC @ + 125C, SURGE = 5 V B L U E C H I P 0.5 0.5 0.5 0.5 0.6 1.4 2.9 4.0 5.0 5.0 5.0 5.0 6.0 14.0 29.0 40.0 7.0 7.0 7.0 7.0 8.0 18.0 36.0 48.0 6.0 6.0 6.0 6.0 8.0 8.0 10.0 10.0 8.0 5.5 3.5 2.0 1.5 1.0 0.8 0.5 8.0 5.5 3.5 2.0 1.5 1.0 0.8 0.7 10 WVDC @ - 55C to + 85C, SURGE = 13 V . . . 7 WVDC @ + 125C, SURGE = 9 V 1.0 2.2 3.3 4.7 6.8 15 33 47 Document Number 40013 Revision 05-Jul-02 B L U E C H I P 0.5 0.5 0.5 0.5 0.7 1.5 3.0 4.7 5.0 5.0 5.0 5.0 7.0 15.0 30.0 47.0 7.0 7.0 7.0 7.0 9.0 19.0 36.0 59.0 For technical questions, contact tantalum@vishay.com 6.0 6.0 6.0 6.0 6.0 8.0 10.0 10.0 9.0 5.5 3.5 2.0 2.0 1.0 0.8 0.7 www.vishay.com 109 49BC / EC Vishay Sprague STANDARD RATINGS - TYPE 49BC NOMINAL CAPACITANCE (F) CASE CODE Max. DCL (A) @ + 25C + 85C + 125C Max. DF 120 Hz (%) Max. ESR 100kHz (Ohms) 15 WVDC @ - 55C to + 85C, SURGE = 20 V . . . 10 WVDC @ + 125C, SURGE = 12 V .68 1.5 2.2 3.3 4.7 10 22 33 B L U E C H I P 0.5 0.5 0.5 0.5 0.8 1.5 3.3 5.0 5.0 5.0 5.0 5.0 8.0 15.0 33.0 50.0 7.0 7.0 7.0 7.0 10.0 19.0 42.0 60.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 10.0 6.0 4.0 2.5 2.5 1.5 1.0 0.8 20 WVDC @ - 55C to + 85C, SURGE = 26 V . . . 13 WVDC @ + 125C, SURGE = 16 V .47 .68 1.0 1.5 2.2 3.3 6.8 15 22 .33 .68 1.0 1.5 2.2 4.7 6.8 10 15 B 0.5 5.0 7.0 6.0 L 0.5 5.0 7.0 6.0 L 0.5 5.0 7.0 6.0 U 0.5 5.0 7.0 6.0 E 0.5 5.0 7.0 6.0 C 0.7 7.0 9.0 6.0 H 1.4 14.0 18.0 6.0 I 3.0 30.0 36.0 6.0 P 4.0 40.0 48.0 6.0 25 WVDC @ - 55C to + 85C, SURGE = 32 V . . . 17 WVDC @ + 125C, SURGE = 22 V 5.0 B 7.0 0.5 6.0 5.0 L 7.0 0.5 6.0 5.0 U 0.5 7.0 6.0 5.0 E 0.5 7.0 6.0 6.0 C 0.6 8.0 6.0 12.0 H 15.0 1.2 6.0 17.0 I 22.0 1.7 6.0 25.0 I 2.5 32.0 6.0 38.0 P 48.0 6.0 3.8 12.0 8.0 8.0 6.0 3.5 3.0 2.5 1.0 1.0 15.0 10.0 6.5 5.0 3.5 2.5 1.2 1.4 1.0 35 WVDC @ - 55C to + 85C, SURGE = 46 V . . . 23 WVDC @ + 125C, SURGE = 28 V .22 .47 .68 1.0 1.5 3.3 4.7 6.8 B L U E C H I P 0.5 0.5 0.5 0.5 0.6 1.0 1.7 2.4 5.0 5.0 5.0 5.0 6.0 10.0 17.0 24.0 7.0 7.0 7.0 7.0 8.0 12.0 22.0 30.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 18.0 12.0 9.0 6.0 4.5 2.5 1.5 1.3 50 WVDC @ - 55C to + 85C, SURGE = 65 V . . . 33 WVDC @ + 125C, SURGE = 40 V .10 .15 .22 .33 .47 .68 1.0 1.5 2.2 3.3 4.7 www.vishay.com 110 B B L L U E C H H I P 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 1.1 1.7 2.4 5.0 5.0 5.0 5.0 5.0 5.0 5.0 8.0 11.0 17.0 24.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 10.0 14.0 22.0 30.0 For technical questions, contact tantalum@vishay.com 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 20.0 20.0 15.0 12.0 8.0 7.0 6.0 4.0 2.5 2.0 2.0 Document Number 40013 Revision 05-Jul-02 49BC / EC Vishay Sprague EXTENDED RATINGS - TYPE 49EC NOMINAL CAPACITANCE (F) CASE CODE Max. DCL (A) @ + 25C + 85C + 125C Max. DF 120 Hz (%) Max. ESR 100kHz (Ohms) 4 WVDC @ - 55C to + 85C, SURGE = 5 V . . . 2.7 WVDC @ + 125C, SURGE = 3.4 V 6.8 B 0.5 5.0 6.0 6.0 3.5 10 L 0.5 5.0 6.0 8.0 2.0 15 U 0.6 6.0 8.0 8.0 1.5 22 E 0.9 9.0 11.0 8.0 1.0 33 C 1.4 14.0 17.0 8.0 1.0 100 H 4.0 40.0 48.0 10.0 0.5 150 I 6.0 60.0 72.0 10.0 0.5 220 P 9.0 90.0 108.0 10.0 0.5 6 WVDC @ - 55C to + 85C, SURGE = 8 V . . . 4 WVDC @ + 125C, SURGE = 5 V B 0.5 5.0 6.0 6.0 3.5 6.8 L 0.5 5.0 6.0 6.0 2.0 10 U 0.6 6.0 8.0 8.0 1.5 15 E 0.9 9.0 11.0 8.0 1.0 22 C 1.4 14.0 17.0 8.0 1.0 68 H 4.0 40.0 48.0 10.0 0.7 120 I 8.0 80.0 96.0 10.0 0.5 150 P 9.0 90.0 108.0 10.0 0.5 4.7 10 WVDC @ - 55C to + 85C, SURGE = 13 V . . . 7 WVDC @ + 125C, SURGE = 9 V 3.3 B 0.5 5.0 6.0 6.0 3.5 4.7 L 0.5 5.0 6.0 6.0 2.0 6.8 U 0.7 7.0 9.0 6.0 2.0 10 E 1.0 10.0 12.0 8.0 1.5 15 C 1.5 15.0 18.0 8.0 1.0 47 H 4.7 47.0 57.0 10.0 0.7 68 I 7.0 70.0 84.0 10.0 0.7 100 P 10.0 100.0 120.0 10.0 0.5 15 WVDC @ - 55C to + 85C, SURGE = 20 V . . . 10 WVDC @ + 125C, SURGE = 12 V 2.2 B 0.5 5.0 6.0 6.0 4.0 3.3 L 0.5 5.0 6.0 6.0 2.5 4.7 U 0.8 8.0 10.0 6.0 2.5 6.8 E 1.0 10.0 12.0 6.0 2.0 10 C 1.5 15.0 18.0 6.0 1.5 33 H 5.0 50.0 60.0 8.0 0.8 47 I 8.0 80.0 96.0 8.0 0.8 68 P 11.0 110.0 132.0 8.0 0.8 Document Number 40013 Revision 05-Jul-02 For technical questions, contact tantalum@vishay.com www.vishay.com 111 49BC / EC Vishay Sprague EXTENDED RATINGS - TYPE 49EC NOMINAL CAPACITANCE (F) CASE CODE Max. DCL (A) @ + 25C + 85C + 125C Max. DF 120 Hz (%) Max. ESR 100kHz (Ohms) 20 WVDC @ - 55C to + 85C, SURGE = 26 V . . . 13 WVDC @ + 125C, SURGE = 16 V 1.5 B 0.5 5.0 6.0 6.0 6.0 2.2 L 0.5 5.0 6.0 6.0 3.5 3.3 U 0.7 7.0 9.0 6.0 3.0 4.7 E 1.0 10.0 12.0 6.0 2.5 6.8 C 1.4 14.0 17.0 6.0 2.0 22 H 4.0 40.0 48.0 6.0 1.0 33 I 7.0 70.0 84.0 6.0 1.0 47 P 10.0 100.0 120.0 6.0 1.0 25 WVDC @ - 55C to + 85C, SURGE = 32 V . . . 17 WVDC @ + 125C, SURGE = 22 V 1.0 B 0.5 5.0 6.0 6.0 8.0 1.5 L 0.5 5.0 6.0 6.0 5.0 2.2 U 0.6 6.0 8.0 6.0 3.5 3.3 E 0.9 9.0 11.0 6.0 3.5 4.7 C 1.2 12.0 15.0 6.0 2.5 10 H 2.5 25.0 30.0 6.0 2.0 15 H 3.8 38.0 46.0 6.0 1.0 22 I 6.0 60.0 72.0 6.0 1.0 33 P 9.0 90.0 108.0 6.0 1.0 35 WVDC @ - 55C to + 85C, SURGE = 46 V . . . 23 WVDC @ + 125C, SURGE = 28 V 0.47 B 0.5 5.0 6.0 6.0 12.0 1.0 L 0.5 5.0 6.0 6.0 6.0 1.5 U 0.6 6.0 8.0 6.0 5.0 2.2 E 0.8 8.0 10.0 6.0 3.5 3.3 C 1.0 10.0 12.0 6.0 2.5 4.7 H 1.7 17.0 20.0 6.0 2.5 6.8 H 2.4 24.0 29.0 6.0 2.0 10 I 4.0 40.0 48.0 6.0 2.0 15 P 6.0 60.0 72.0 6.0 2.0 www.vishay.com 112 For technical questions, contact tantalum@vishay.com Document Number 40013 Revision 05-Jul-02 49BC / EC Vishay Sprague ORDERING INFORMATION 49 LEADLESS TANTALUM CAPACITOR EC SERIES 225 CAPACITANCE BC = Standard Range. EC = Extended Range. E CASE CODE 035 DC VOLTAGE RATING M CAPACITANCE TOLERANCE See Ratings and Case Codes Table. J = 5% 0 UNSLEEVED A G TERMINATION FINISH GRADE A = Industrial grade. X = Requires internal spec. K = 10% M = 20% G = Gold plated. This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. D = Solder dipped. PACKAGING in inches [millimeters] Top View Blister-Pack Trays: Type 49BC/EC capacitors are shipped in 'Blister-Pack' trays containing 50 pieces each in a 5 x 10 matrix configuration. The 'Blister-Pack' provides a separate pocket for each unit to prevent damage to the capacitors during shipping, handling and storage. 3 3/4 [95.250] 3/8 [9.525] Round 'Blister' Pockets 1/4 [6.350] High Orientation of the capacitors within the tray pockets is random with respect to polarity and mounting surface. This packaging is ideal for hand placement of the capacitors as it takes up very little room at the work station. It is recommended that operators remove and handle these capacitors using a blunt, coated tweezer to prevent damage to the Blue Seal coating. 5 1/2 [139.700] Side View (Cross-Section) Tape and Reel Specifications: Type 49BC/EC capacitors are available in tape and reel packaging to facilitate the use of automatic placement equipment. Tape and Reel is per EIA (Electronic Industries Association) specification RS-481-1. Capacitor orientation within the tape pockets is negative terminal toward sprocket holes and mounting side down. Quantities less than minimum reel will be shipped in 'Blister-Pack' trays. + W Case Code Tape Width W Unit Pitch Ctr/Ctr P Quantity per Full 7" [178] Reel Minimum Quantity per Reel B 8mm 4mm 2500 1250 L 12mm 4mm 2500 1250 U 12mm 4mm 2500 1250 E 12mm 4mm 2500 1250 C 12mm 4mm 2500 1250 H 12mm 8mm 1000 500 I 12mm 8mm 600 300 P 12mm 8mm 600 300 P Document Number 40013 Revision 05-Jul-02 For technical questions, contact tantalum@vishay.com www.vishay.com 113