VEROBOARD SINGLE SIDED, COPPER PRINTED CIRCUIT BOARDS, FULLY PIERCED WITH HOLES. ALSO KNOWN AS STRIPBOARD Veroboard is ideal for development and prototyping work, Veroboard is designed primarily for hard wiring of discrete components, typically in analogue circuits, but is equally useful where a number of common bus or signal lines are required. Veroboard is manufactured from copper clad laminated board which has been pierced with a grid of holes and machined to provide parallel tracks. Veroboard (stripboard) Features * * * Ideal for hard wiring or discrete components Range of standard sizes Choice of hole sizes and grid pitch All boards are 1.6mm thick with copper thickness of 35um. Hole grid: 2.54 x 2.54 mm., hole diameter: 1.02 mm. For Veroboard current carrying capacity details, please here for a download A "Spot Face Cutter" can be used to break the tracks easily, Order Code: 22-0239 Board Dimensions in mm 95.10 x 454.66 95.10 x 454.66 100 x 500 100 x 500 100.84 x 162.56 111.76 x 176.53 121.92 x 101.6 119.38 x 454.66 119.38 x 454.66 179.07 x 454.66 204.75 x 393.70 No. pierced Holes/Track Copper Tracks 34 34 36 36 28 40 41 36 38 60 78 Verostrip with vertical tracks Board No pierced Dimensions in Copper Tracks mm 38.10 x 101.6 81 Base Part material 179 179 197 197 64 61 44 179 179 179 155 Epoxy SRBP SRBP Epoxy SRBP SRBP SRBP SRBP SRBP SRBP SRBP 01-0112 01-0040 01-27567 01-27568 07-0008 01-0014 01-0021 01-0041 01-0043 01-0042 67-1902 Holes/Track Base Part material 15 SRBP 01-0171