SIDACtor (R) Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor(R) Series - Modified TO-220 Description The SIDACtor(R) Series Modified TO-220 are designed to protect baseband equipment from damaging overvoltage transients. The series provides a robust single port through-hole solution that enables voice though DS-1 equipment to comply with various global regulatory standards. Features and Benefits t Low voltage overshoot t Fails short circuit when surged in excess of ratings t Low on-state voltage Agency Approvals t Does not degrade with use Agency t Modified TO-220 Package Agency File Number t Single-port protection t Lead forms available E133083 Applicable Global Standards Pinout Designation t5*"" t(3*OUSBCVJMEJOH t5*"# t*&$ t*56,&OIBODFE Level* t:%5 t:%5 t*56,#BTJD-FWFM PIN 1 PIN 3 t:%5 t(3*OUFSCVJMEJOH PIN 2 *A/B-rated parts require series resistance Schematic Symbol 1 (T) 3 2 (G) (R) Electrical Characteristics VDRM VS VDRM VS @lDRM=5A @100V/s @lDRM=5A @100V/s Part Number Marking V min V max V min Pins 1-2, 3-2 P0602AALxx P1402AALxx P1602AALxx P2202AALxx P2702AALxx P3002AALxx P3602AALxx P4202AALxx P4802AALxx P6002AALxx P0602AA P1402AA P1602AA P2202AA P2702AA P3002AA P3602AA P4202AA P4802AA P6002AA 25 58 65 90 120 140 170 190 220 275 40 77 95 130 160 180 220 250 300 350 V max Pins 1-3 50 116 130 180 240 280 340 380 440 550 80 154 190 260 320 360 440 500 600 700 VT @IT=2.2 A IS Pins 1-2, 3-2 mA min mA max A pF min pf max max 4 4 4 4 4 4 4 4 4 4 50 150 150 150 150 150 150 150 150 150 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 See Capacitance Values Table 2.2 2.2 2.2 2.2 2.2 V max IT Capacitance IH @1MHz, 2V bias Table continues on next page. (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 166 Revised: February 22, 2011 SIDACtor (R) Protection Thyristors Baseband Protection (Voice-DS1) Electrical Characteristics (continued) Part Number Marking P0602ABLxx P1402ABLxx P1602ABLxx P2202ABLxx P2702ABLxx P3002ABLxx P3602ABLxx P4202ABLxx P4802ABLxx P6002ABLxx P0602ACLxx P1402ACLxx P1602ACLxx P2202ACLxx P2702ACLxx P3002ACLxx P3602ACLxx P4202ACLxx P4802ACLxx P6002ACLxx P0602AB P1402AB P1602AB P2202AB P2702AB P3002AB P3602AB P4202AB P4802AB P6002AB P0602AC P1402AC P1602AC P2202AC P2702AC P3002AC P3602AC P4202AC P4802AC P6002AC VDRM VS VDRM VS @lDRM=5A @100V/s @lDRM=5A @100V/s V min V max V min Pins 1-2, 3-2 25 58 65 90 120 140 170 190 220 275 25 58 65 90 120 140 170 190 220 275 40 77 95 130 160 180 220 250 300 350 40 77 95 130 160 180 220 250 300 350 V max Pins 1-3 50 116 130 180 240 280 340 380 440 550 50 116 130 180 240 280 340 380 440 550 80 154 190 260 320 360 440 500 600 700 80 154 190 260 320 360 440 500 600 700 VT @IT=2.2 A IH IS IT Pins 1-2, 3-2 mA min mA max A max 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 50 150 150 150 150 150 150 150 150 150 50 150 150 150 150 150 150 150 150 150 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 V max Capacitance See Capacitance Values Table Notes: - Absolute maximum ratings measured at TA= 25C (unless otherwise noted). - Devices are bi-directional (unless otherwise noted). - XX Part Number Suffix: `RP' (Reel Pack), Blank (Bulk Pack), or `60' (Type 60 lead form bulk pack) Capacitance Values Part Number P0602AALxx P1402AALxx P1602AALxx P2202AALxx P2702AALxx P3002AALxx P3602AALxx P4202AALxx P4802AALxx P6002AALxx P0602ABLxx P1402ABLxx P1602ABLxx P2202ABLxx P2702ABLxx P3002ABLxx P3602ABLxx P4202ABLxx P4802ABLxx P6002ABLxx pF Pin 1-2, 3-2 Tip-Ground, Ring-Ground MIN MAX 15 145 40 60 35 60 30 50 25 45 25 40 25 35 25 35 20 35 20 35 15 250 40 155 35 145 30 115 25 105 25 95 25 90 25 85 20 85 20 80 (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. pF Pin 1-3 Tip-Ring MIN MAX 10 90 20 35 20 35 15 30 15 25 15 25 10 20 10 20 10 20 10 20 10 145 20 90 20 85 15 65 15 60 15 55 10 50 10 50 10 50 10 45 Part Number P0602ACLxx P1402ACLxx P1602ACLxx P2202ACLxx P2702ACLxx P3002ACLxx P3602ACLxx P4202ACLxx P4802ACLxx P6002ACLxx pF Pin 1-2, 3-2 Tip-Ground, Ring-Ground pF Pin 1-3 Tip-Ring MIN MAX MIN MAX 25 55 45 45 40 35 35 30 30 30 250 155 145 115 105 95 90 85 85 80 10 30 25 25 20 20 15 15 15 15 145 90 85 65 60 55 50 50 50 45 Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. 167 Revised: February 22, 2011 SIDACtor (R) Protection Thyristors Baseband Protection (Voice-DS1) Surge Ratings Series IPP ITSM 50/60 Hz di/dt A min A min A/s max 75 100 200 20 25 50 500 500 500 0.2x310 0.5x700 2 2x10 2x10 2 8x20 1.2x50 2 10x160 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 A min A min A min A min A min A min A min A min 20 25 50 150 250 500 150 250 400 90 150 200 50 100 150 75 100 200 75 125 175 45 80 100 1 A B C 1 1 1 Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP $ - The device must initially be in thermal equilibrium with -40C < TJ < $ 1 Current waveform in s 2 Voltage waveform in s Thermal Considerations Package Symbol Modified TO-220 PIN 1 Value Unit TJ Operating Junction Temperature Range UP C TS Storage Temperature Range UP C 60 C/W R0JA PIN 3 PIN 2 Parameter Thermal Resistance: Junction to Ambient V-I Characteristics tr x td Pulse Waveform IPP - Peak Pulse Current - %IPP +I IT IS IH IDRM -V +V VT VDRM VS tr = rise time to peak value td = decay time to half value Peak Value 100 Waveform = tr x td 50 Half Value 0 0 td tr t - Time (s) -I Normalized DC Holding Current vs. Case Temperature 10 IH 8 6 25 C 4 2 IH (TC = 25C) 2.0 14 12 Ratio of Percent of VS Change - % Normalized VS Change vs. Junction Temperature 0 -4 -6 -8 1.8 1.6 1.4 25C 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 -40 Junction Temperature (TJ) - C (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - C 168 Revised: February 22, 2011 SIDACtor (R) Protection Thyristors Baseband Protection (Voice-DS1) Soldering Parameters Pb-Free assembly (see Fig. 1) $ $ 60-180 secs. - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Average ramp up rate (Liquidus Temp (TL) to peak) 3C/sec. Max. TS(max) to TL - Ramp-up Rate 3C/sec. Max. Reflow - Temperature (TL) (Liquidus) - Temperature (tL) Figure 1 TP $ 60-150 secs. Peak Temp (TP) tP Critical Zone TL to TP Ramp-up Temperature Reflow Condition TL TS(max) tL Ramp-down Preheat TS(min) tS $ 25 Time within 5C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6C/sec. Max. Time 25C to Peak Temp (TP) 8 min. Max. Do not exceed time to peak temperature (t 25C to peak) Time $ Physical Specifications Environmental Specifications Lead Material Copper Alloy High Temp Voltage Blocking 80% Rated VDRM (VAC Peak $PS $ 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Terminal Finish 100% Matte-Tin Plated Temp Cycling $UP $ NJOEXFMM VQUP cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC $ 3) VQUPIST&*" JEDEC, JESD22-A-101 High Temp Storage $IST.*-45% .FUIPE JEDEC, JESD22-A-101 Low Temp Storage -65C, 1008 hrs. Thermal Shock $UP $ NJOEXFMM TFDUSBOTGFS 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) $ 3) BUN VQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat $ TFDT.*-45% .FUIPE Body Material UL recognized epoxy meeting flammability classification 94V-0 Moisture Sensitivity Level Part Numbering Part Marking P xxx 2 A x L xx TYPE P = SIDACtor MEDIAN VOLTAGE CONSTRUCTION VARIABLE PACKAGE TYPE 3) $ IST SFnPXDZDMFT $1FBL +&%&$+45% -FWFM XXXXXXXXX Blank: Bulk RP: Reel Pack 60: Type 60 Lead Form (Special order item. For type 60 orders, contact factory) xxxxx RoHS COMPLIANT IPP RATING (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Part Marking Code (Refer to Electrical Characteristics Table) PACKING OPTIONS 169 Revised: February 22, 2011 Date Code SIDACtor (R) Protection Thyristors Baseband Protection (Voice-DS1) Dimensions - Modified TO-220 A Inches O D Temperature Measurement Point F G Tape and Reel Specification -- Modified TO-220 P PIN 3 PIN 2 PIN 1 L M K H N J The modified TO-220 package is designed to meet mechanical standards as set forth in JEDEC publication number 95. Millimeters Min Max Min A 0.400 0.410 10.16 10.42 D 0.360 0.375 9.14 9.53 F 0.110 0.130 2.80 3.30 G 0.540 0.575 13.71 14.61 H 0.025 0.035 0.63 0.240 (6.10) Max 0.019 (0.5) 1.626 (41.15) 0.750 0.010 (19.05 0.25) 0.720 (18.29) 0.360 (9.14) J 0.195 0.205 4.95 5.21 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.90 M 0.070 0.085 1.78 2.16 N O P 0.018 0.024 0.46 0.61 0.178 0.290 0.188 0.310 4.52 7.37 4.78 7.87 A Direction of Feed 1.968 (50.0) Description Quantity Added Suffix Industry Standard Modified TO-220 Tape and Reel Pack 700 RP EIA-468-B Modified TO-220 Bulk Pack 500 N/A N/A Modified TO-220 Type 60 Lead Form Bulk Pack 500 60 (special order item, contact factory for details) N/A (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 0.100 (2.54) Dimensions are in inches (and millimeters). Packing Options Package Type 0.100 (2.54) 14.173 (360.0) 0.89 K 0.500 (12.7) 170 Revised: February 22, 2011