KR FAMILY SERIES/KRW*KR*PHN*TR CONNECTOR IDC Disconnectable Insulation displacement and Crimp style connectors 2.0mm (.079") pitch Features ------------------------ * Multi-IDC-harnesses are possible * Various types of connectors In addition to the KRW, KR, PHN and TR connectors, there are other 2.0mm(.079")pitch connectors available such as the KRD, CR, DA, DD and DS ranges. * Cost reduction By introducing the KR family series, a reduction in harness production time can be achieved through rationalization/ standardization. This in turn, will therefore reduce harness costs, thus benefiting both the harness-maker and the setmaker alike. * Two types of circuit layouts The connector is available in either the normal or reverse configurations. (Circuit number layouts are different from each other.) Based upon JST's field proven KR series connectors, the KR series family of connectors have been expanded to meet the requirements of high density packaging. The KRW connector allows double-row wire-to-board connection using either the KR or PHN connectors. Whilst the TR connector allows wire-to-wire connection, also using either the KR or PHN connectors. Specifications ------------------- Series Item KRW connector 100V AC, DC Voltage rating -25C to +85C (including temperature rise) Temperature rise Contact resistance PH connector: Side entry type header (for PHN and KR receptacles) KR connector: IDC receptacle Initial value / 10m max. After environmental testing / 20m max. Insulation resistance 1,000M min. Withstanding voltage 800V AC / minute KR connector, CR connector, PHN connector Applicable connector TR connector: Unit for wire-to-wire connection (for PHN and KR receptacles) Applicable PC board thickness 1.6mm(.063") - - 0.5 to 2.0mm(.020" to .079") Applicable panel thickness KRW connector: Holder PHN connector: Crimp style receptacle PHN connector: Crimp style receptacle KRW connector: Side entry type hea * Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 Recognized E60389 1 2 2 2 2 Certified LR20812 KR connector: IDC receptacle KRW connector: Top entry type header R75087: PH, PHN connectors R75088: KR connector R9851222: KRW connector PH connector: Top entry type header (for PHN and KR receptacles) 334 TR/TRW connector 1.0A AC, DC (AWG#26) Current rating R9851223: TR connector KR FAMILY SERIES CONNECTOR Insulation displacement connector (Receptacle) ------------------------------- (2 to 12 circuits) Circuits 5.15(.203) B 2.0 (.079) A 2.0 (.079) 3.5(.138) 4.2(.165) 0.9(.035) H JST Reverse type:Circuit No.1 Normal type:Circuit No.1 (13 to 16 circuits) 5.15(.203) B 2.0 (.079) 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Normal type 02KR-6H-P 03KR-6H-P 04KR-6H-P 05KR-6H-P 06KR-6H-P 07KR-6H-P 08KR-6H-P 09KR-6H-P 10KR-6H-P 11KR-6H-P 12KR-6H-P 13KR-6H-P 14KR-6H-P 15KR-6H-P 16KR-6H-P Model No. Reverse type 02KR-6H-PC 03KR-6H-PC 04KR-6H-PC 05KR-6H-PC 06KR-6H-PC 07KR-6H-PC 08KR-6H-PC 09KR-6H-PC 10KR-6H-PC 11KR-6H-PC 12KR-6H-PC 13KR-6H-PC 14KR-6H-PC 15KR-6H-PC 16KR-6H-PC Dimensions mm(in.) A B Q'ty / bag 2.0( .079) 4.0( .157) 6.0( .236) 8.0( .315) 10.0( .394) 12.0( .472) 14.0( .551) 16.0( .630) 18.0( .709) 20.0( .787) 22.0( .866) 24.0( .945) 26.0(1.024) 28.0(1.102) 30.0(1.181) 6.0( .236) 8.0( .315) 10.0( .394) 12.0( .472) 14.0( .551) 16.0( .630) 18.0( .709) 20.0( .787) 22.0( .866) 24.0( .945) 26.0(1.024) 28.0(1.102) 30.0(1.181) 32.0(1.260) 34.0(1.339) 2,000 2,000 2,000 2,000 2,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 Material and Finish A 2.0 (.079) 0.9(.035) 3.5(.138) 4.2(.165) Contact: Phosphor bronze, tin-plated Housing: 2 to 12 circuits...Nylon 66, UL94V-0, gray 13 to 16 circuits...Glass-filled nylon 66, UL94V-0, gray H JST Reverse type:Circuit No.1 Applicable wire UL1571, 1061(Contact JST for other UL styles.) AWG#28, #26 Conductor / 7 strands, tin-plated annealed copper Insulation O.D. / 0.9 to 1.0mm(.035" to .039") Normal type:Circuit No.1 Crimp style connector (Contact) --------------------------------------------- Model No. 5.7(.224) 2.05(.081) 1.0(.039) SPH-002T-P0.5L 0.08 to 0.22 28 to 24 Insulation O.D. mm(in.) Q'ty/ reel 0.8 to 1.5(.031 to .059) 8,000 Material and Finish 2.08(.082) 2.85(.112) Applicable wire mm2 AWG# Phosphor bronze, tin-plated 1.5(.059) Note: SPH-002T-P0.5S is also available. Applicator for the semi-automatic press AP-K2N ------------------------------- Contact SPH-002T-P0.5L Crimp applicator MKS-L with safety cover without safety cover APLMK SPH002-05L APLNC SPH002-05L Compact crimp applicator MKS-LS with safety cover without safety cover APLMKLS SPH002-05L APLLSNC SPH002-05L Strip-crimp applicator MKS-SC with safety cover - 335 KR FAMILY SERIES CONNECTOR Crimp style connector (Housing) -------------------------------------------- Normal type (2 circuits) B 2.0(.079) (3 to 16 circuits) 4.2(.165) A 4.2(.165) B 2.0(.079) 3.5(.138) 3.5(.138) A Circuit No.1 6.25(.246) H JST H JST 6.25(.246) 2.0(.079) No. of Circuits Circuit No.1 No. of Circuits Reverse type (2 circuits) B A (3 to 16 circuits) 4.2(.165) 2.0(.079) 4.2(.165) B 3.5(.138) 2.0(.079) A 3.5(.138) 2.0(.079) No. of Circuits Circuits 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Normal type PHNR-02-H PHNR-03-H PHNR-04-H PHNR-05-H PHNR-06-H PHNR-07-H PHNR-08-H PHNR-09-H PHNR-10-H PHNR-11-H PHNR-12-H PHNR-13-H PHNR-14-H PHNR-15-H PHNR-16-H Circuit No.1 Model No. Reverse type PHNR-02C-H PHNR-03C-H PHNR-04C-H PHNR-05C-H PHNR-06C-H PHNR-07C-H PHNR-08C-H PHNR-09C-H PHNR-10C-H PHNR-11C-H PHNR-12C-H PHNR-13C-H PHNR-14C-H PHNR-15C-H PHNR-16C-H Material Nylon 66, UL94V-0, gray 336 Circuit No.1 Dimensions mm(in.) A B Q'ty / bag 2.0( .079) 4.0( .157) 6.0( .236) 8.0( .315) 10.0( .394) 12.0( .472) 14.0( .551) 16.0( .630) 18.0( .709) 20.0( .787) 22.0( .866) 24.0( .945) 26.0(1.024) 28.0(1.102) 30.0(1.181) 6.0( .236) 8.0( .315) 10.0( .394) 12.0( .472) 14.0( .551) 16.0( .630) 18.0( .709) 20.0( .787) 22.0( .866) 24.0( .945) 26.0(1.024) 28.0(1.102) 30.0(1.181) 32.0(1.260) 34.0(1.339) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 6.25(.246) H JST H JST 6.25(.246) No. of Circuits KR FAMILY SERIES CONNECTOR Single-row shrouded header (Through-hole type) ------------------------------ Top entry type Circuits (2 circuits) 4.5(.177) B B 2B-PH-KBL-H B 3B-PH-KBL-H B 4B-PH-KBL-H B 5B-PH-KBL-H B 6B-PH-KBL-H B 7B-PH-KBL-H B 8B-PH-KBL-H B 9B-PH-KBL-H B10B-PH-KBL-H B11B-PH-KBL-H B12B-PH-KBL-H B13B-PH-KBL-H B14B-PH-KBL-H B15B-PH-KBL-H B16B-PH-KBL-H 2 [1.7(.067)] 3 6.0(.236) 4 5 6 [3.4 (.134)] 7 Normal type: Circuit No.1 Reverse type: Circuit No.1 1.95 A (.077) 8 9 10 0.5(.020) 11 12 (3 to 16 circuits) 4.5(.177) 1.7(.067) B 13 14 6.0(.236) 15 16 Circuits [3.4 (.134)] Reverse type: Circuit No.1 2.0 1.95 (.079) 0.5 (.020) A Normal type: Circuit No.1 3 4 (.077) 5 Side entry type 6 4.8(.189) [1.7(.067)] B 7 8 1.6(.063) 6.0(.236) Reverse type: Circuit No.1 6.25(.246) 9 2.0 1.95 (.079) A 0.5 (.020) 10 11 12 13 [3.4 (.134)] Normal type: Circuit No.1 14 15 16 (.077) S 2B-PH-KL S 3B-PH-KL S 4B-PH-KL S 5B-PH-KL S 6B-PH-KL S 7B-PH-KL S 8B-PH-KL S 9B-PH-KL S10B-PH-KL S11B-PH-KL S12B-PH-KL S13B-PH-KL S14B-PH-KL S15B-PH-KL S16B-PH-KL Reverse type Model No. Top entry type Side entry type (with a boss) B 2B-PH-KBLC-H B 3B-PH-KBLC-H B 4B-PH-KBLC-H B 5B-PH-KBLC-H B 6B-PH-KBLC-H B 7B-PH-KBLC-H B 8B-PH-KBLC-H B 9B-PH-KBLC-H B10B-PH-KBLC-H B11B-PH-KBLC-H B12B-PH-KBLC-H B13B-PH-KBLC-H B14B-PH-KBLC-H B15B-PH-KBLC-H B16B-PH-KBLC-H 2 0.5(.020) Normal type Model No. Top entry type Side entry type (with a boss) S 2B-PH-KLC-H S 3B-PH-KLC-H S 4B-PH-KLC-H S 5B-PH-KLC-H S 6B-PH-KLC-H S 7B-PH-KLC-H S 8B-PH-KLC-H S 9B-PH-KLC-H S10B-PH-KLC-H S11B-PH-KLC-H S12B-PH-KLC-H S13B-PH-KLC-H S14B-PH-KLC-H S15B-PH-KLC-H S16B-PH-KLC-H Dimensions mm(in.) A B Q'ty / box Top entry type Side entry (with a boss) type 2.0( .079) 5.9( .232) 1,000 1,000 4.0( .157) 7.9( .311) 1,000 1,000 6.0( .236) 9.9( .390) 1,000 500 8.0( .315) 11.9( .469) 1,000 500 10.0( .394) 13.9( .547) 1,000 500 12.0( .472) 15.9( .626) 500 500 14.0( .551) 17.9( .705) 500 250 16.0( .630) 19.9( .783) 500 250 18.0( .709) 21.9( .862) 500 250 20.0( .787) 23.9( .941) 500 250 22.0( .866) 25.9(1.020) 500 250 24.0( .945) 27.9(1.098) 250 250 26.0(1.024) 29.9(1.177) 250 200 28.0(1.102) 31.9(1.256) 250 200 30.0(1.181) 33.9(1.335) 250 200 Dimensions mm(in.) A B Q'ty / box Top entry type Side entry (with a boss) type 2.0( .079) 5.9( .232) 1,000 1,000 4.0( .157) 7.9( .311) 1,000 1,000 6.0( .236) 9.9( .390) 1,000 500 8.0( .315) 11.9( .469) 1,000 500 10.0( .394) 13.9( .547) 1,000 500 12.0( .472) 15.9( .626) 500 500 14.0( .551) 17.9( .705) 500 250 16.0( .630) 19.9( .783) 500 250 18.0( .709) 21.9( .862) 500 250 20.0( .787) 23.9( .941) 500 250 22.0( .866) 25.9(1.020) 500 250 24.0( .945) 27.9(1.098) 250 250 26.0(1.024) 29.9(1.177) 250 200 28.0(1.102) 31.9(1.256) 250 200 30.0(1.181) 33.9(1.335) 250 200 Material and Finish Pin: Copper alloy, copper-undercoated, tin/lead-plated (reflow) Wafer: Nylon 66, UL94V-0, gray Note: Top entry type headers without boss are also available. PC board layout (viewed from component side) ---- Assembly layout--------------------- Top entry type Top entry type 4.8(.189) 0.7-0.10 0 (.028 -.004 ) dia. Side entry type Normal type: Circuit No.1 0.7-0.10 0 (.028 -.004 ) dia. 2.00.05 (.079.002) 4.8(.189) 2.00.05 (.079.002) 8.5(.335) 7.6(.299) 6.9(.272) 6.0(.236) Reverse type: Circuit No.1 Reverse type: Circuit No.1 Side entry type 1.50.05 (.059.002) 1.5+0.05 0 0 (.059+.002 ) 0 0.8+0.1 0 ) dia. (.031 +.004 6.25 (.246) Normal type: Circuit No.1 Note: 1. Tolerances are non-cumulative: 0.05mm (.002") for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 337 KR FAMILY SERIES CONNECTOR Single-row shrouded header (SMT type) -------------------------------------- Top entry type Circuits 2 B 5.0(.197) [2.0(.079)] A 2.975 (.117) 2.0(.079) 3 4 1.9(.075) 5 6 6.6(.260) 7 8 9 10 11 Normal type: Circuit No.1 Reverse type: Circuit No.1 1.4 (.055) 2.2 (.087) 12 13 14 15 16 Circuits Side entry type 2 3 2.4 (.094) 5.5(.217) 4 5 6 7 8 2.95 (.116) 2.0 (.079) 1.6(.063) 6.0(.236) A B [2.6 (.102)] 9 10 11 12 13 Reverse type: Circuit No.1 Normal type: Circuit No.1 14 15 16 Normal type Model No. Top entry type Side entry type B 2B-PH-SM3-TB S 2B-PH-SM3-TB B 3B-PH-SM3-TB S 3B-PH-SM3-TB B 4B-PH-SM3-TB S 4B-PH-SM3-TB B 5B-PH-SM3-TB S 5B-PH-SM3-TB B 6B-PH-SM3-TB S 6B-PH-SM3-TB B 7B-PH-SM3-TB S 7B-PH-SM3-TB B 8B-PH-SM3-TB S 8B-PH-SM3-TB B 9B-PH-SM3-TB S 9B-PH-SM3-TB B10B-PH-SM3-TB S10B-PH-SM3-TB B11B-PH-SM3-TB S11B-PH-SM3-TB B12B-PH-SM3-TB S12B-PH-SM3-TB B13B-PH-SM3-TB S13B-PH-SM3-TB B14B-PH-SM3-TB S14B-PH-SM3-TB B15B-PH-SM3-TB S15B-PH-SM3-TB B16B-PH-SM3-TB Reverse type Model No. Top entry type Side entry type B 2B-PH-SM3C-TB S 2B-PH-SM3C-TB B 3B-PH-SM3C-TB S 3B-PH-SM3C-TB B 4B-PH-SM3C-TB S 4B-PH-SM3C-TB B 5B-PH-SM3C-TB S 5B-PH-SM3C-TB B 6B-PH-SM3C-TB S 6B-PH-SM3C-TB B 7B-PH-SM3C-TB S 7B-PH-SM3C-TB B 8B-PH-SM3C-TB S 8B-PH-SM3C-TB B 9B-PH-SM3C-TB S 9B-PH-SM3C-TB B10B-PH-SM3C-TB S10B-PH-SM3C-TB B11B-PH-SM3C-TB S11B-PH-SM3C-TB B12B-PH-SM3C-TB S12B-PH-SM3C-TB B13B-PH-SM3C-TB S13B-PH-SM3C-TB B14B-PH-SM3C-TB S14B-PH-SM3C-TB B15B-PH-SM3C-TB S15B-PH-SM3C-TB B16B-PH-SM3C-TB Dimensions mm(in.) A B Q'ty / reel 2.0( .079) 7.9( .311) 1,000 4.0( .157) 9.9( .390) 1,000 6.0( .236) 11.9( .469) 1,000 8.0( .315) 13.9( .547) 1,000 10.0( .394) 15.9( .626) 1,000 12.0( .472) 17.9( .705) 1,000 14.0( .551) 19.9( .783) 1,000 16.0( .630) 21.9( .862) 1,000 18.0( .709) 23.9( .941) 1,000 20.0( .787) 25.9(1.020) 1,000 22.0( .866) 27.9(1.098) 1,000 24.0( .945) 29.9(1.177) 1,000 26.0(1.024) 31.9(1.256) 1,000 28.0(1.102) 33.9(1.335) 1,000 30.0(1.181) 35.9(1.413) 1,000 Dimensions mm(in.) A B Q'ty / reel 2.0( .079) 7.9( .311) 1,000 4.0( .157) 9.9( .390) 1,000 6.0( .236) 11.9( .469) 1,000 8.0( .315) 13.9( .547) 1,000 10.0( .394) 15.9( .626) 1,000 12.0( .472) 17.9( .705) 1,000 14.0( .551) 19.9( .783) 1,000 16.0( .630) 21.9( .862) 1,000 18.0( .709) 23.9( .941) 1,000 20.0( .787) 25.9(1.020) 1,000 22.0( .866) 27.9(1.098) 1,000 24.0( .945) 29.9(1.177) 1,000 26.0(1.024) 31.9(1.256) 1,000 28.0(1.102) 33.9(1.335) 1,000 30.0(1.181) 35.9(1.413) 1,000 Material and Finish Pin: Copper alloy, copper-undercoated, tin/lead-plated Housing: Nylon 46, UL94V-0, ivory (natural) Solder tab: Brass, copper-undercoated, tin/lead-plated PC board layout (viewed from component side) ------ Assembly layout--------------------- Normal type: Circuit No.1 Edge of the shrouded header (mating side) 5.0(.197) 1.60.1 (.063.004) 1.50.1 (.059.004) [2.0(.079)] 5.5(.217) 7.5(.295) 6.6(.260) 1.0(.039)min. 2.00.05 (.079.002) Side entry type 8.5(.335) 7.6(.299) Reverse type: Circuit No.1 Note: 1. Tolerances are non-cumulative: 0.05mm (.002") for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 338 Top entry type 1.60.1 (.063.004) 3.40.1 (.134.004) 5.5 (.217)max. 9.0(.354)min. Normal type: Circuit No.1 3.00.1 1.0 (.039) (.118.004) 2.00.05 (.079.002) 1.60.1 (.063.004) 0.2(.008) Edge of the shrouded header (mating side) Side entry type 1.0(.039)min. 2.0 (.079)max. Reverse type: Circuit No.1 7.5(.295)min. Top entry type [1.0(.039)] KR FAMILY SERIES CONNECTOR Double-row shrouded Header ----------------------------------------------- Top entry type Circuits Normal type: Line A/Circuit No.1 B 10 A Reverse type: Line A/Circuit No.1 12 14 Line A 16 HJST 18 20 Line B 22 Normal type: Line B/Circuit No.1 Reverse type: Line B/Circuit No.1 24 26 10.7(.421) 30 32 2.0(.079) 3.7 (.146) Dimensions Q'ty / box mm(in.) A B Top entry type Side entry type 8.0( .315) 16.4( .646) 416 10.0( .394) 18.4( .724) 384 12.0( .472) 20.4( .803) 352 14.0( .551) 22.4( .882) 320 280 16.0( .630) 24.4( .961) 288 252 18.0( .709) 26.4(1.039) 256 224 20.0( .787) 28.4(1.118) 224 196 22.0( .866) 30.4(1.197) 224 196 24.0( .945) 32.4(1.276) 192 168 26.0(1.024) 34.4(1.354) 192 168 28.0(1.102) 36.4(1.433) 192 168 30.0(1.181) 38.4(1.512) 160 140 Material and Finish 3.4 (.134) 7.5(.295) 28 Model No. Normal type Reverse type Top entry type Side entry type Top entry type Side entry type B10B-KRWHK B10B-KRWHK-C B12B-KRWHK B12B-KRWHK-C B14B-KRWHK B14B-KRWHK-C B16B-KRWHK S16B-KRWHS B16B-KRWHK-C S16B-KRWHS-C B18B-KRWHK S18B-KRWHS B18B-KRWHK-C S18B-KRWHS-C B20B-KRWHK S20B-KRWHS B20B-KRWHK-C S20B-KRWHS-C B22B-KRWHK S22B-KRWHS B22B-KRWHK-C S22B-KRWHS-C B24B-KRWHK S24B-KRWHS B24B-KRWHK-C S24B-KRWHS-C B26B-KRWHK S26B-KRWHS B26B-KRWHK-C S26B-KRWHS-C B28B-KRWHK S28B-KRWHS B28B-KRWHK-C S28B-KRWHS-C B30B-KRWHK S30B-KRWHS B30B-KRWHK-C S30B-KRWHS-C B32B-KRWHK S32B-KRWHS B32B-KRWHK-C S32B-KRWHS-C Post: Copper alloy, copper-undercoated, tin/lead-plated Wafer: Nylon 66, UL94V-0, gray 4.7 (.185) A Note: 1.Top entry type headers with bosses or without kinked tails are also available. 2.The products listed above are supplied packed in tray. B Side entry type Reverse type: Line B/Circuit No.1 Normal type: Line B/Circuit No.1 10.05(.396) B 4.7(.185) 3.7(.146) A 2.0(.079) H J S T 10.85(.427) Line B 3.4 (.134) Line A 2.8(.110) Reverse type: Line A/Circuit No.1 5.8(.228) 2.0(.079) Normal type: Line A/Circuit No.1 Double-row shrouded Header (with locks) ------------------------------------- Top entry type Line A/Circuit No.1 Circuits B A 10 12 Line A HJST 14 16 Line B 18 20 10.7(.421) 22 Line B/Circuit No.1 3.4 (.134) 11.5(.453) 24 10.7(.421) 28 30 32 Dimensions mm(in.) With a compact boss A B B10B-KRWHK-F1-1D 8.0( .315) 17.0( .669) B12B-KRWHK-F1-1D 10.0( .394) 19.0( .748) B14B-KRWHK-F1-1D 12.0( .472) 21.0( .827) B16B-KRWHK-F1-1D 14.0( .551) 23.0( .906) B18B-KRWHK-F1-1D 16.0( .630) 25.0( .984) B20B-KRWHK-F1-1D 18.0( .709) 27.0(1.063) B22B-KRWHK-F1-1D 20.0( .787) 29.0(1.142) B24B-KRWHK-F1-1D 22.0( .866) 31.0(1.220) B26B-KRWHK-F1-1D 24.0( .945) 33.0(1.299) B28B-KRWHK-F1-1D 26.0(1.024) 35.0(1.378) B30B-KRWHK-F1-1D 28.0(1.102) 37.0(1.457) B32B-KRWHK-F1-1D 30.0(1.181) 39.0(1.535) Q'ty / box 364 308 280 252 252 224 196 196 168 168 168 140 Material and Finish Post: Copper alloy, copper-undercoated, tin/lead-plated Wafer: Nylon 66, UL94V-0, gray Note: 1. The products listed above are supplied packed in tray. 2. Not UL/CSA/TU V approved. 3. The applicable holder is "KRWH-( )( )-( )-1" only. 3.4 (.134) 11.5(.453) With a standard boss 26 Model No. Top entry type Without bosses With a standard boss B10B-KRWHK-F1 B10B-KRWHK-F1-1 B12B-KRWHK-F1 B12B-KRWHK-F1-1 B14B-KRWHK-F1 B14B-KRWHK-F1-1 B16B-KRWHK-F1 B16B-KRWHK-F1-1 B18B-KRWHK-F1 B18B-KRWHK-F1-1 B20B-KRWHK-F1 B20B-KRWHK-F1-1 B22B-KRWHK-F1 B22B-KRWHK-F1-1 B24B-KRWHK-F1 B24B-KRWHK-F1-1 B26B-KRWHK-F1 B26B-KRWHK-F1-1 B28B-KRWHK-F1 B28B-KRWHK-F1-1 B30B-KRWHK-F1 B30B-KRWHK-F1-1 B32B-KRWHK-F1 B32B-KRWHK-F1-1 With a compact boss 339 KR FAMILY SERIES CONNECTOR PC board layout (viewed from component side) --------- Assembly layout ----------- Top entry type Top entry type Normal type: Reverse type: 2.00.05 Line A/Circuit No.1 (.079.002) Line A/Circuit No.1 8.6(.339) 8.4(.331) 6.50.05 (.256.002) Line A 0.8+0.1 0 (.031+.004 +.0 )dia. A0.1 (.004) Line B with KR receptacles Normal type: Line B/Circuit No.1 Reverse type: Line B/Circuit No.1 With locks +0.1 0 +.004 0 0.8 (.031 )dia. Boss hole 1.20.1 (.047.004)dia. 11.5(.453) 2.00.05 (.079.002) Line A 0.8+0.1 0 (.031+.004 0 )dia. 0.40.05 (.016.002) 6.50.05 (.256.002) Line A Line A/ Circuit No.1 6.50.05 (.256.002) 2.00.05 (.079.002) 2.650.05 A0.1(.004) (.104.002) Boss hole 1.60.1 (.063.004)dia. 1.10.05 (.043.002) 2.650.05 A0.1(.004) (.104.002) Line A/ Circuit No.1 with KR receptacles Line B Line B Line B/Circuit No.1 Line B/Circuit No.1 (With a standard boss) 11.5(.453) With locks with PHN receptacles with PHNR receptacles (With a standard boss) (With a standard boss) (With a compact boss) Side entry type Side entry type A0.1(.004) Reverse type: Line B/Circuit No.1 Normal type: Line A/Circuit No.1 5.80.1 2.00.05 (.228.004)(.079.002) Normal type: Line B/Circuit No.1 11.15(.439) 10.95(.431) 0.8+0.1 0 (.031+.004 +.0 )dia. Reverse type: Line A/Circuit No.1 2.00.05 (.079.002) 1.6+0.1 0 (.063 +.004 +.0 )dia. 2.80.05 (.110.002) with PHN receptacles with KR receptacles Note: 1. Tolerances are non-cumulative: 0.05mm (.002") for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. KRW connector Holder----------------------------------------------------- 0.7(.028) 1.0(.039) B A 1.0(.039)dia. Normal type: Line A/Circuit No.1 Circuits Reverse type: Line A/Circuit No.1 10 12 14 16 18 20 22 24 26 28 30 32 Indication for Line A B 9.7(.382) 3.0(.118) H JST 5.0(.197) A 5.0(.197) Line A Line B Indication for Line B Reverse type: Line B/Circuit No.1 Normal type: Line B/Circuit No.1 340 6.65(.262) 0.8(.031) 0.8(.031) 9.7 (.382 ) Model No. Normal type Reverse type KRWH-10-H KRWH-10C-H KRWH-12-H KRWH-12C-H KRWH-14-H KRWH-14C-H KRWH-16-H KRWH-16C-H KRWH-18-H KRWH-18C-H KRWH-20-H KRWH-20C-H KRWH-22-H KRWH-22C-H KRWH-24-H KRWH-24C-H KRWH-26-H KRWH-26C-H KRWH-28-H KRWH-28C-H KRWH-30-H KRWH-30C-H KRWH-32-H KRWH-32C-H Dimensions mm(in.) A B 12.0( .472) 14.0( .551) 16.0( .630) 18.0( .709) 20.0( .787) 22.0( .866) 24.0( .945) 26.0(1.024) 28.0(1.102) 30.0(1.181) 32.0(1.260) 34.0(1.339) Material Nylon 66, UL94V-0, gray 13.4( .528) 15.4( .606) 17.4( .685) 19.4( .764) 21.4( .843) 23.4( .921) 25.4(1.000) 27.4(1.079) 29.4(1.157) 31.4(1.236) 33.4(1.315) 35.4(1.394) KR FAMILY SERIES CONNECTOR KRW connector Holder (for header with locks) -------------------------------- 1.0(.039) B Circuits Model No. 10 12 14 16 18 20 22 24 26 28 30 32 KRWH-10-H-1 KRWH-12-H-1 KRWH-14-H-1 KRWH-16-H-1 KRWH-18-H-1 KRWH-20-H-1 KRWH-22-H-1 KRWH-24-H-1 KRWH-26-H-1 KRWH-28-H-1 KRWH-30-H-1 KRWH-32-H-1 Dimensions mm(in.) A B 0.7(.028) A Normal type: Line A/Circuit No.1 1.0(.039)dia. Indication for Line A B 9.7(.382) 3.0(.118) 3.0(.118) A H JST 5.0(.197) Line A Line B Indication for Line B 9.7 (.382 ) 13.4( .528) 15.4( .606) 17.4( .685) 19.4( .764) 21.4( .843) 23.4( .921) 25.4(1.000) 27.4(1.079) 29.4(1.157) 31.4(1.236) 33.4(1.315) 35.4(1.394) Material 6.65(.262) 0.8(.031) 0.8(.031) Normal type: Line B/Circuit No.1 12.0( .472) 14.0( .551) 16.0( .630) 18.0( .709) 20.0( .787) 22.0( .866) 24.0( .945) 26.0(1.024) 28.0(1.102) 30.0(1.181) 32.0(1.260) 34.0(1.339) Nylon 66, UL94V-0, gray Note: 1. Not UL/CSA/TU V approved. 2. The applicable header is "B( )B-KRW( )K-F1-( )" only. TR connector (Unit for wire-to-wire connection) -------------------------------- 7.4(.291) Circuits 2 3 4 1.3 (.051) 2.8 (.110) 2.0(.079) 5 Normal type: Circuit No.1 6 A 7 Reverse type: Circuit No.1 8 Panel layout 10 C0.1(.004) 10.5(.413) H J T 9 11 12 Secure locking 3.20.1(.126.004) B D0.1(.004) 6.40.1(.252.004) 2.0(.079) 13 14 15 16 Model No. Normal type Reverse type BU02P-TR-P-H BU02P-TR-PC-H BU03P-TR-P-H BU03P-TR-PC-H BU04P-TR-P-H BU04P-TR-PC-H BU05P-TR-P-H BU05P-TR-PC-H BU06P-TR-P-H BU06P-TR-PC-H BU07P-TR-P-H BU07P-TR-PC-H BU08P-TR-P-H BU08P-TR-PC-H BU09P-TR-P-H BU09P-TR-PC-H BU10P-TR-P-H BU10P-TR-PC-H BU11P-TR-P-H BU11P-TR-PC-H BU12P-TR-P-H BU12P-TR-PC-H BU13P-TR-P-H BU13P-TR-PC-H BU14P-TR-P-H BU14P-TR-PC-H BU15P-TR-P-H BU15P-TR-PC-H BU16P-TR-P-H BU16P-TR-PC-H Dimensions mm(in.) A B 2.0( .079) 7.6( .299) C D 7.9( .311) 11.6( .457) 4.0( .157) 9.6( .378) 9.9( .390) 13.6( .535) 6.0( .236) 11.6( .457) 11.9( .469) 15.6( .614) 8.0( .315) 13.6( .535) 13.9( .547) 17.6( .693) 10.0( .394) 15.6( .614) 15.9( .626) 19.6( .772) 12.0( .472) 17.6( .693) 18.0( .709) 21.6( .850) 14.0( .551) 19.6( .772) 20.0( .787) 23.6( .929) 16.0( .630) 21.6( .850) 22.0( .866) 25.6(1.008) 18.0( .709) 23.6( .929) 24.0( .945) 27.6(1.087) 20.0( .787) 25.6(1.008) 26.0(1.024) 29.6(1.165) 22.0( .866) 27.6(1.087) 28.0(1.102) 31.6(1.244) 24.0( .945) 29.6(1.165) 30.0(1.181) 33.6(1.323) 26.0(1.024) 31.6(1.244) 32.0(1.260) 35.6(1.402) 28.0(1.102) 33.6(1.323) 34.0(1.339) 37.6(1.480) 30.0(1.181) 35.6(1.402) 36.0(1.417) 39.6(1.559) Material and Finish Post: Copper alloy, copper-undercoated, tin/lead-plated Housing: Nylon 66, UL94V-0, gray TR connectors without Secure locking device are also available. TRW connector (Unit for wire-to-wire connection) ------------------------------ A Normal type: Line B/Circuit No.1 Line B Mark Circuits 2.0(.079) Reverse type: Line B/Circuit No.1 16 18 B H JST 13.2(.520) 20 22 24 26 A Line A Mark Panel layout B +.004 4.2 +0.1 0 (.165 0 ) 7.60.05 (.299.002) +0.1 +.004 1.5 +0.1 11.5 0 0 (.059 0 ) (.453 +.004 0 ) Normal type: Line A/Circuit No.1 13.4(.528) Reverse type: Line A/Circuit No.1 28 30 32 Model No. Normal type Reverse type BU16P-TRW-P-H BU16P-TRW-PC-H BU18P-TRW-P-H BU18P-TRW-PC-H BU20P-TRW-P-H BU20P-TRW-PC-H BU22P-TRW-P-H BU22P-TRW-PC-H BU24P-TRW-P-H BU24P-TRW-PC-H BU26P-TRW-P-H BU26P-TRW-PC-H BU28P-TRW-P-H BU28P-TRW-PC-H BU30P-TRW-P-H BU30P-TRW-PC-H BU32P-TRW-P-H BU32P-TRW-PC-H A Dimensions mm(in.) B C D 14.0( .551) 23.5( .925) 23.9( .941) 27.5(1.083) 16.0( .630) 25.5(1.004) 25.9(1.020) 29.5(1.161) 18.0( .709) 27.5(1.083) 27.9(1.098) 31.5(1.240) 20.0( .787) 29.5(1.161) 29.9(1.177) 33.5(1.319) 22.0( .866) 31.5(1.240) 31.9(1.256) 35.5(1.398) 24.0( .945) 33.5(1.319) 33.9(1.335) 37.5(1.476) 26.0(1.024) 35.5(1.398) 35.9(1.413) 39.5(1.555) 28.0(1.102) 37.5(1.476) 37.9(1.492) 41.5(1.634) 30.0(1.181) 39.5(1.555) 39.9(1.571) 43.5(1.713) Material and Finish Post: Copper alloy, copper-undercoated, tin/lead-plated Housing: Nylon 66, UL94V-0 +.004 C +0.1 0 ( 0 ) D0.05(.002) 341