Revised January 2005 NC7WZ125 TinyLogic UHS Dual Buffer with 3-STATE Outputs General Description Features The NC7WZ125 is a Dual Non-Inverting Buffer with independent active LOW enables for the 3-STATE outputs. The Ultra High Speed device is fabricated with advanced CMOS technology to achieve superior switching performance with high output drive while maintaining low static power dissipation over a broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC operating range. The inputs and outputs are high impedance when VCC is 0V. Inputs tolerate voltages up to 5.5V independent of VCC operating range. Outputs tolerate voltages above VCC when in the 3-STATE condition. Space saving US8 surface mount package MicroPak Pb-Free leadless package Ultra High Speed; tPD 2.6 ns typ into 50 pF at 5V VCC High Output Drive; 24 mA at 3V VCC Broad VCC Operating Range; 1.65V to 5.5V Matches the performance of LCX when operated at 3.3V VCC Power down high impedance inputs/outputs Overvoltage tolerant inputs facilitate 5V to 3V translation Outputs are overvoltage tolerant in 3-STATE mode Proprietary noise/EMI reduction circuitry implemented Ordering Code: Order Number Product Package Code Top Number Mark NC7WZ125K8X MAB08A NC7WZ125L8X WZ25 MAC08A Package Description Supplied As 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide 3k Units on Tape and Reel P3 Pb-Free 8-Lead MicroPak, 1.6 mm Wide 5k Units on Tape and Reel Pb-Free package per JEDEC J-STD-020B. Logic Symbol Connection Diagrams IEEE/IEC Pin Descriptions Pin Names Description OEn Enable Inputs for 3-STATE Outputs (Top View) An Input Pad Assignments for MicroPak Yn 3-STATE Outputs Function Table Inputs Output OE An L L L L H H H L Z H H Z L = LOW Logic Level Z = 3-STATE H = HIGH Logic Level Yn TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. (c) 2005 Fairchild Semiconductor Corporation DS500396 (Top Thru View) MicroPak is a trademark of Fairchild Semiconductor Corporation. www.fairchildsemi.com NC7WZ125 TinyLogic UHS Dual Buffer with 3-STATE Outputs March 2001 NC7WZ125 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 3) Supply Voltage (VCC) -0.5V to +7V DC Input Voltage (VIN) (Note 2) -0.5V to +7V Supply Voltage Operating (VCC) DC Output Voltage (VOUT) -0.5V to +7V Supply Voltage Data Retention (VCC) DC Input Diode Current (IIK) 1.65V to 5.5V 1.5V to 5.5V Input Voltage (VIN) @VIN < 0V -50 mA DC Output Diode Current (IOK) @VOUT < 0V -50 mA 50 mA DC Output Source/Sink Current (IOUT) +150C Junction Lead Temperature (TL) +260C (Soldering, 10 seconds) Power Dissipation (PD) @ +85C 0V to VCC 0V to 5.5V -40C to +85C Input Rise and Fall Time (tr, tf) -65C to +150C Storage Temperature Range (TSTG) Junction Lead Temperature under Bias (TJ) Active State 3-STATE Operating Temperature (TA) 100 mA DC VCC/Ground Current (ICC/IGND) 0V to 5.5V Output Voltage (VOUT ) VCC @ 1.8V, 0.15V, 2.5V 0.2V 0 ns/V to 20 ns/V VCC @ 3.3V 0.3V 0 ns/V to 10 ns/V VCC @ 5.0V 0.5V 0 ns/V to 5 ns/V Thermal Resistance (JA) 250C/W 250 mW Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. Note 2: The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Note 3: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH Parameter HIGH Level Input Voltage (V) LOW Level Input Voltage VOH HIGH Level Output Voltage Min Typ LOW Level Output Voltage IIN Input Leakage Current IOZ 3-STATE Output Leakage IOFF Power Off Leakage Current ICC Quiescent Supply Current Min Max 0.75 VCC 1.65 to 1.95 0.25 VCC 0.25 VCC 0.3 VCC Units Conditions V 0.7 VCC 0.7 VCC 2.3 to 5.5 VOL TA = -40C to +85C Max 1.65 to 1.95 0.75 VCC 2.3 to 5.5 VIL TA = +25C VCC 0.3 VCC V 1.65 1.55 1.65 1.55 2.3 2.2 2.3 2.2 3.0 2.9 3.0 2.9 4.5 4.4 4.5 4.4 1.65 1.29 1.52 1.29 IOH = -4 mA 2.3 1.9 2.15 1.9 VIN = VIH IOH = -8 mA 3.0 2.4 2.80 2.4 3.0 2.3 2.68 2.3 4.5 3.8 4.20 3.8 V V VIN = VIH IOH = -100 A or VIL or VIL IOH = -16 mA IOH = -24 mA IOH = -32 mA 1.65 0.0 0.10 0.10 VIN = VIH IOL = 100 A 2.3 0.0 0.10 0.10 3.0 0.0 0.10 0.10 4.5 0.0 0.10 0.10 1.65 0.08 0.24 0.24 IOL = 4 mA 2.3 0.10 0.3 0.3 IOL = 8 mA V V or VIL IOL = 16 mA 3.0 0.15 0.4 0.4 3.0 0.22 0.55 0.55 4.5 0.22 0.55 0.55 0 to 5.5 0.1 1 A VIN = 5.5V, GND 1.65 to 5.5 0.5 5 A VIN = VIH or VIL 0.0 1 10 A VIN or VOUT = 5.5V 1.65 to 5.5 1 10 A VIN = 5.5V, GND IOL = 24 mA IOL = 32 mA 0 VOUT 5.5V www.fairchildsemi.com 2 NC7WZ125 Noise Characteristics Symbol TA = + 25C VCC Parameter (V) Typ Max Units Conditions VOLP (Note 4) Quiet Output Maximum Dynamic VOL 5.0 1.0 V CL = 50 pF VOLV (Note 4) Quiet Output Minimum Dynamic VOL 5.0 1.0 V CL = 50 pF VOHV (Note 4) Quiet Output Minimum Dynamic VOH 5.0 4.0 V CL = 50 pF VIHD (Note 4) Minimum HIGH Level Dynamic Input Voltage 5.0 3.5 V CL = 50 pF VILD (Note 4) Maximum LOW Level Dynamic Input Voltage 5.0 1.5 V CL = 50 pF Note 4: Parameter guaranteed by design. AC Electrical Characteristics Symbol Parameter TA = +25C VCC (V) Min Typ TA = -40C to +85C Max Min Max tPLH, Propagation Delay 1.8 0.15 2.0 12.0 2.0 13.0 tPHL AN to YN 2.5 0.2 1.0 7.5 1.0 8.0 3.3 0.3 0.8 5.2 0.8 5.5 5.0 0.5 0.5 4.5 0.5 4.8 tPLH, Propagation Delay 3.3 0.3 1.2 5.7 1.2 6.0 tPHL AN to YN 5.0 0.5 0.8 5.0 0.8 5.3 tOSLH, Output to Output Skew 3.3 0.3 1.0 1.0 tOSHL (Note 5) 5.0 0.5 0.8 0.8 Units Conditions Figure Number CL = 15 pF ns RD = 1 M Figures 1, 3 S1= Open CL = 50 pF ns Figures 1, 3 RD = 500 S1= Open CL = 50 pF ns Figures 1, 3 RD = 500 S1= Open tPZL, Output Enable Time tPZH 1.8 0.15 3.0 14.0 3.0 15.0 CL = 50 pF 2.5 0.2 1.8 8.5 1.8 9.0 RD, RU = 500 3.3 0.3 1.2 6.2 1.2 6.5 5.5 0.5 0.8 5.5 0.8 5.8 ns S1 = GND for tPZH Figures 1, 3 S1 = V for t I PZL VI = 2 x VCC tPLZ, Output Disable Time tPHZ 1.8 0.15 2.5 12.0 2.5 13.0 CL = 50 pF 2.5 0.2 1.5 8.0 1.5 8.5 RD, RU = 500 3.3 0.3 0.8 5.7 0.8 6.0 5.0 0.5 0.3 4.7 0.3 5.0 ns S1 = GND for tPZH S1 = VI for tPZL Figures 1, 3 VI = 2 x VCC CIN Input Capacitance 0 2.5 COUT Output Capacitance 5.0 4 CPD Power Dissipation Capacitance 3.3 10 5.0 12 pF pF (Note 6) Figure 2 Note 5: Parameter guaranteed by design. tOSLH = |tPLHmax - t PLHmin|; tOSHL = |tPHLmax - tPHLmin|. Note 6: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD)(VCC)(fIN) + (ICCstatic). 3 www.fairchildsemi.com NC7WZ125 AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tw = 500 ns FIGURE 1. AC Test Circuit Input = AC Waveform; tr = tf = 1.8 ns; PRR = 10 MHz; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit FIGURE 3. AC Waveforms www.fairchildsemi.com 4 Tape Format for US8 Package Designator Tape Number Cavity Section Cavities Status Status 125 (typ) Empty Sealed 3000 Filled Sealed 75 (typ) Empty Sealed Cover Tape Leader (Start End) K8X Carrier Trailer (Hub End) Cover Tape TAPE DIMENSIONS inches (millimeters) Tape Format for MicroPak Package Designator Tape Number Cavity Section Cavities Status Status 125 (typ) Empty Sealed 3000 Filled Sealed 75 (typ) Empty Sealed Leader (Start End) L8X Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) 5 www.fairchildsemi.com NC7WZ125 Tape and Reel Specification NC7WZ125 Tape and Reel Specification (Continued) REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/-0.000 0.567 W1 + 0.078/-0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/-0.00) (14.40) (W1 + 2.00/-1.00) www.fairchildsemi.com 6 NC7WZ125 Physical Dimensions inches (millimeters) unless otherwise noted 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide Package Number MAB08A 7 www.fairchildsemi.com NC7WZ125 TinyLogic UHS Dual Buffer with 3-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 8-Lead MicroPak, 1.6 mm Wide Package Number MAC08A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 8