Embedded Power for Business-Critical Continuity Rev.06.26.07 smt05e_05 1 of 4 SMT10E Series 3.0 - 5.5 Vin single output Total Power: 13.2W Input Voltage: 3.0 - 5.5 Vdc # of Outputs: Single Special Features * 10 A current rating * Input voltage range: 3.0 Vdc to 5.5 Vdc * Output voltage range: 0.8 Vdc to 3.63 Vdc * Ultra high efficiency: 96% @ 5 Vin and 3.3 Vout * Extremely low internal power dissipation * Minimal thermal design concerns * Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 * Ideal solution where board space is at a premium or tighter card pitch is required * Industry standard surface-mount footprint * Available RoHS compliant * 2 year warranty Safety UL/cUL CAN/CSA 22.2 No. E174104 UL 60950 File No. E174104 TUV Product Service (EN60950) Certificate No. B 03 10 38572 CB report and certificate to DE3-51686M1 The SMT10E series are non-isolated dc-dc converters packaged in a surface-mount footprint giving designers a cost effective solution for conversion from either a 3.3 Vdc or 5 Vdc input to output voltages of 0.8 Vdc and 3.63 Vdc. The SMT10E offers a range of fixed outputs (and one wide trim output unit) at an industry leading 10 A which allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion by the SMT10E series from existing 3.3Vdc or 5 Vdc system voltages eliminates the need for redesign of existing power architectures when voltage requirements change. The SMT10E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface-mount technology and automated manufacturing techniques, the SMT10E offers compact size and efficiencies of up to 96%. Embedded Power for Business-Critical Continuity Rev.06.26.07 smt05e_05 2 of 4 Specifications All specifications are typical at 5Vin and 3.3 Vout, full load at 25C unless otherwise stated. EMC CHARACTERISTICS OUTPUT SPECIFICATIONS Voltage adjustability (See Note 1) Fixed output versions Wide trim version 10% 0.8-3.63 Vdc Electrostatic discharge Conducted immunity Radiated immunity Setpoint accuracy 0.4% Line regulation 0.2% GENERAL SPECIFICATIONS Load regulation 1.0% Efficiency Minimum load 0A Overshoot/undershoot Ripple and noise None 0 to 20 MHz BW Temperature co-efficient 50 mV pk-pk 25 mV rms max. 0.01%/C Transient response 60 mV max. deviation 50 s recovery to within 1.0% Remote sense 10% Vo compensation EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 See table Insulation voltage Switching frequency Non-isolated Fixed 300 kHz typ. Approvals and standards EN60950 UL/cUL60950 Material flammability Dimensions UL94V-0 (LxWxH) 33.02 x 13.46 x 8.21 mm 1.3 x 0.53 x 0.323 inches Weight 6.3 g (0.22 oz) Coplanarity INPUT SPECIFICATIONS MTBF Input voltage range Input current Input current (max.) 3.0-5.5 Vdc No load 70 mA typ. 8 A max. @ Io max. and Vout = 3.63 V Input current ripple 110 mA rms Remote ON/OFF (See Note 2) Start-up time 20 ms 100 m Telcordia SR-332 MIL-HDBK-217F 7,042,000 hours 680,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 3) Operating ambient, temperature Non-operating -40 C to +100 C -40 C to +125 C PROTECTION Short-circuit Thermal Continuous Automatic recovery Embedded Power for Business-Critical Continuity Rev.06.26.07 smt05e_05 3 of 4 Specifications All specifications are typical at 5Vin and 3.3 Vout, full load at 25C unless otherwise stated. OUTPUT POWER (MAX.) INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (2,4,5) 13.2 W 3.0-5.5 Vdc 1.2 Vdc 0A 10 A 89% 0.2% 1.0% SMT10E-05S1V2J 16.5 W 3.0-5.5 Vdc 1.5 Vdc 0A 10 A 90% 0.2% 1.0% SMT10E-05S1V5J 19.8 W 3.0-5.5 Vdc 1.8 Vdc 0A 10 A 92% 0.2% 1.0% SMT10E-05S1V8J 27.5 W 3.0-5.5 Vdc 2.5 Vdc 0A 10 A 95% 0.2% 1.0% SMT10E-05S2V5J 36.3 W 4.5-5.5 Vdc 3.3 Vdc 0A 10 A 96% 0.2% 1.0% SMT10E-05S3V3J 36.3 W 3.0-5.5 Vdc 0.8-3.63 Vdc 0A 10 A 96% 0.2% 1.0% SMT10E-05W3V3J Part Number System with Options REGULATION SMT10E-05S3V3J Product Family SMT = Surface-mount Packaging Options (4) J = Pb-free (RoHS 6/6 compliant) Rated Output Current 10 = 10 Amps Output Voltage 1V2 = 1.2 V, 1V5 = 1.5 V, 1V8 = 1.8 V, 2V5 = 2.5 V, 3V3 = 3.3 V Performance E = Enhanced Performance Type of Output S = Single W = Wide Input Voltage 05 = 3.0 Vdc to 5.5 Vdc Output Voltage Adjustment of the SMT10E-05W3V3J Series The ultra-wide output voltage trim range offers major advantages to users who select the SMT10E-05W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SMT10E-05W3V3J converter leaves the factory the output has been adjusted to the default voltage of 3.3V. * When Vin 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc * When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc Notes Notes Cond. 1 3 2 When Vin 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc. When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc. The SMT10E features a `Negative Logic' Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT10E: Configuration Remote pin open circuit Remote pin pulled low Remote pin pulled high [Von/off >1.2 V] Converter Operation Unit is ON Unit is ON Unit is OFF A `Positive Logic' Remote ON/OFF version is also possible with this converter. To order please place the suffix `-R' at the end of the model number, e.g. SMT10E-05W3V3-RJ. 4 5 Full derating curves available in both the Longform Datasheet and Application Note 168. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. Embedded Power for Business-Critical Continuity Rev.06.26.07 smt05e_05 4 of 4 Americas 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 TOP VIEW 0.039 (1.00) 0.039 (1.00) 0.530 0.010 (13.46 0.25) Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 BOTTOM VIEW 0.190 (4.83) 0.190 (4.83) 0.190 (4.83) 5 4 3 0.297 (7.54) 2 0.048 (1.22) 0.323 (8.21) Installed Ht. 0.007 (0.18) Min Clearance Asia (HK) 1 6 SIDE VIEW 0.405 (10.29) 0.430 (10.92) 1.3000.010 (33.02 0.25) 0.075 (1.91) 0.310 (7.87) 16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: Seating Plane www.powerconversion.com Max. component technicalsupport@powerconversion.com Connector (6PL) Width: 0.112 0.003 (2.84 0.08) Length: 0.062 0.002 (1.57 0.04) All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated PIN CONNECTIONS PIN NUMBER FUNCTION 1 Remote ON/OFF 2 Remote Sense + 3 Trim 4 +Vout 5 Ground 6 +Vin While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. (c)2007 Emerson Electric Co.