Rev.06.26.07
smt05e_05
3 of 4
Embedded Power for
Business-Critical Continuity
All specifications are typical at 5Vin and 3.3 Vout, full load at 25°C unless otherwise stated.
Specifications
OUTPUT INPUT OUTPUT OUTPUT OUTPUT EFFICIENCY REGULATION MODEL
POWER VOLTAGE VOLTAGE CURRENT CURRENT (TYP.) LINE LOAD NUMBER (2,4,5)
(MAX.) (MIN.) (MAX.)
13.2 W 3.0-5.5 Vdc 1.2 Vdc 0 A 10 A 89% ±0.2% ±1.0% SMT10E-05S1V2J
16.5 W 3.0-5.5 Vdc 1.5 Vdc 0 A 10 A 90% ±0.2% ±1.0% SMT10E-05S1V5J
19.8 W 3.0-5.5 Vdc 1.8 Vdc 0 A 10 A 92% ±0.2% ±1.0% SMT10E-05S1V8J
27.5 W 3.0-5.5 Vdc 2.5 Vdc 0 A 10 A 95% ±0.2% ±1.0% SMT10E-05S2V5J
36.3 W 4.5-5.5 Vdc 3.3 Vdc 0 A 10 A 96% ±0.2% ±1.0% SMT10E-05S3V3J
36.3 W 3.0-5.5 Vdc 0.8-3.63 Vdc 0 A 10 A 96% ±0.2% ±1.0% SMT10E-05W3V3J
Notes
1 When Vin ≥ 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc. When
Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc.
2 The SMT10E features a ‘Negative Logic’ Remote ON/OFF operation. If
not using the Remote ON/OFF pin, leave the pin open (the converter will be
on). The Remote ON/OFF pin is referenced to ground.
The following conditions apply for the SMT10E:
Configuration Converter Operation
Remote pin open circuit Unit is ON
Remote pin pulled low Unit is ON
Remote pin pulled high [Von/off >1.2 V] Unit is OFF
A ‘Positive Logic’ Remote ON/OFF version is also possible with this converter.
To order please place the suffix ‘-R’ at the end of the model number, e.g.
SMT10E-05W3V3-RJ.
SMT10E-05S3V3J
Part Number System with Options
Rated Output Current
10 = 10 Amps
Input Voltage
05 = 3.0 Vdc to 5.5 Vdc
Type of Output
S = Single
W = Wide
Output Voltage
1V2 = 1.2 V, 1V5 = 1.5 V, 1V8 = 1.8 V,
2V5 = 2.5 V, 3V3 = 3.3 V
The ultra-wide output voltage trim range offers major advantages to users who
select the SMT10E-05W3V3J. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SMT10E-05W3V3J converter
leaves the factory the output has been adjusted to the default voltage of 3.3V.
• When Vin ≥ 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc
• When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc
Output Voltage Adjustment of the SMT10E-05W3V3J Series
Product Family
SMT = Surface-mount
Performance
E = Enhanced Performance
Notes Cond.
3 Full derating curves available in both the Longform Datasheet and Application
Note 168.
4 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special
request, please contact your local sales representative for details.
5 NOTICE: Some models do not support all options. Please contact your local
Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
Packaging Options (4)
J = Pb-free (RoHS 6/6 compliant)