Cree(R) PLCC4 1 in 1 SMD LED CLM2C-RCA/ACA PRODUCT DESCRIPTION FEATURES SMD LEDs is packaged in the industry * Size (mm):3.2 x 2.8 standard package. These LEDs have high * Color and Typical Dominant Wavelength: reliability performance and are Red (619 - 624nm) designed to work under a wide range of Amber(584 - 596nm) environmental conditions. * Luminous Intensity (mcd) This high reliability feature makes CLM2C-RCA:(1400 - 5600) them ideally suited to be used under CLM2C-ACA:(1800 - 7100) Architectural lighting application conditions * Moisture Sensitivity Level: 5a CLD-CT1288.005 PRODUCT FAMILY DATA SHEET APPLICATIONS * Channel Letter * Architectural Lighting These LEDs are suited for channel letter,or * Lead-Free WWW.CREE.COM/HB Architectural lighting applications. * RoHS Compliant Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree PLCC4 1 in 1 SMD LED CLM2C-RCA/ACA ABSOLUTE MAXIMUM RATINGS (TA = 25C) Items Symbol Absolute Maximum Rating Unit Red/Amber Forward Current IF 70 mA IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 182 mW Operation Temperature Topr -40 ~ +100 C Storage Temperature Tstg -40 ~ +100 C Junction Temperature TJ 110 C Junction/Ambient RTHJA 250 C/W Junction/Solder Point RTHJS 100 C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD Peak Forward Current Note Class 2 Note: Pulse width 0.1 msec, duty 1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25C) Characteristics Color Symbol Condition Unit Forward Voltage Red/Amber VF IF = 20 mA V Reverse Current Red/Amber IR VR = 5 V A Dominant Wavelength Luminous Intensity Minimum Typical Maximum 2.0 2.6 10 Red D IF = 20 mA nm 619 621 624 Amber D IF = 20 mA nm 584 591 596 Red IV IF = 20 mA mcd 1400 3500 Amber IV IF = 20 mA mcd 1800 4000 Note: Continuous reverse voltage can cause LED damage. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC4 1 in 1 SMD LED CLM2C-RCA/ACA INTENSITY BIN LIMIT (IF = 20 mA) Red (CLM2C-RCA) Bin Code Min. (mcd) Max. (mcd) Wb 1400 Xa 1800 Xb 2240 Ya Amber (CLM2C-ACA) Bin Code Min. (mcd) Max. (mcd) 1800 Xa 1800 2240 2240 Xb 2240 2800 2800 Ya 2800 3550 2800 3550 Yb 3550 4500 Yb 3550 4500 Z0 4500 5600 Z0 4500 5600 A0 5600 7100 Tolerance of measurement of luminous intensity is 10%. COLOR BIN LIMIT (IF = 20 mA) Red (CLM2C-RCA) Amber (CLM2C-ACA) Bin Code Min. (nm) Max. (nm) Bin Code Min. (nm) Max. (nm) RB 619 624 A2 584 587 A3 587 590 A4 590 593 A5 593 596 Tolerance of measurement of dominant wavelength is 1 nm. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC4 1 in 1 SMD LED CLM2C-RCA/ACA ORDER CODE TABLE* Luminous Intensity (mcd) Dominant Wavelength Color Kit Number Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) Red CLM2C-RCA-CWbZ0BB3 1400 5600 RB 619 RB 624 Red CLM2C-RCA-CXaZ0BB3 1800 5600 RB 619 RB 624 Red CLM2C-RCA-CXbZ0BB3 2240 5600 RB 619 RB 624 Red CLM2C-RCA-CYaZ0BB3 2800 5600 RB 619 RB 624 Color Kit Number Luminous Intensity (mcd) Dominant Wavelength Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) Amber CLM2C-ACA-CXaA0253 1800 7100 A2 584 A5 596 Amber CLM2C-ACA-CXbA0253 2240 7100 A2 584 A5 596 Amber CLM2C-ACA-CXbA0343 2240 7100 A3 587 A4 593 Amber CLM2C-ACA-CYaA0253 2800 7100 A2 584 A5 596 Amber CLM2C-ACA-CYaA0343 2800 7100 A3 587 A4 593 Amber CLM2C-ACA-CYbA0253 3550 7100 A2 584 A5 596 Amber CLM2C-ACA-CYbA0343 3550 7100 A3 587 A4 593 Notes: 1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin codes will not be orderable. 2. Please refer to the "Cree LED Lamp Reliability Test Standards" document #1 for reliability test conditions. 3. Please refer to the "Cree LED Lamp Soldering & Handling" document #2 for information about how to use this LED product safely. #1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf #2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC4 1 in 1 SMD LED CLM2C-RCA/ACA GRAPHS (RELATIVE LUMINOUS INTENSITY) IF (mA) 5.0 100.0 4.0 80.0 Amber Red 60.0 3.0 Red 40.0 Amber 2.0 20.0 1.0 VF(V) 0.0 1.8 2.0 2.2 2.4 2.6 0.0 2.8 FORWARD VOLTAGE. -60 -50 -40 -20 -30 40 20 60 IF(mA) 100 80 FIG.2 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT FIG.1 FORWARD CURRENT VS. Vr(V) 0.0 (RELATIVE LUMINOUS INTENSITY) -10 0 100% -10 80% -20 60% -30 40% -40 20% Amber 0% 300 -50 Ir(uA) FIG.3 RED&AMBER REVERSE CURRENT VS. REVERSE VOLTAGE. 400 Red 500 600 WL(nm) 800 900 700 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. IF(mA) 20 100 (RELATIVE LUMINOUS INTENSITY) 10 1.0 30 Rth j-s=100 C/W 40 80 50 60 60 0.5 40 Rth j-a=250 C/W 70 20 T ( C) 0 0 20 40 60 80 100 FIG.5 RED&AMBER MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=110 C) 80 90 -1.0 -0.5 0 0 30 60 90 FIG.6 FAR FIELD PATTERN The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC4 1 in 1 SMD LED CLM2C-RCA/ACA MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC4 1 in 1 SMD LED CLM2C-RCA/ACA KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC4 1 in 1 SMD LED CLM2C-RCA/ACA REFLOW SOLDERING * * * The CLM2C-RCA/ACA is rated as a MSL 5a product. The recommended floor life out of bag is 24hrs. The temperature profile is as below. Document No.: COTCO-05-0057 Rev. NO. : 13 Temperature Melting-point Pre-heat Soak Reflow Cooling Time Use all SMD besides LP6-NPP1-01-N1 Use only with CLM2C-RCA/ACA Solder = Sn63-Pb37 Solder = Lead-free Solder Average ramp-up rate = 4C/s max. Average ramp-up rate = 4C/s max Preheat temperature = 150C ~200C Preheat temperature = 100C ~150C Preheat temperature = 150C ~200C Preheat 100s Preheat time = time 120s = max Preheat time = 100s max. Average ramp-up rate = 4C/s max max. Ramp-down rate = 6C/s Ramp-down rate =max 6C/s max. Peak temperature = 235C=max Peak temperature 230C Ramp-down rate = 6C/s max. max. Peak temperature = 250C max. Time within 5C of actual Peak Temperature = 10s max Time within 5C of actual Peak Temperature = 10s max. Duration above 217C is 45s max Duration above 183C is 80s max. Only use LP6-NPP1-01-N1 Time within 5C of actual Peak Temperature = 10s max. Duration above 217C is 80s max. [13] Solder = Low Lead-free Average ramp-up rate = 3C/s max. Preheat temperature = 130C ~170C Preheat time = 120s max. Ramp-down rate = 6C/s max. Peak temperature = 213C max. Time within 3C of actual Peak Temperature = 25s max. Duration above 200C is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): Refer to "http://www.cree.com/led-components/media/documents/sh-HB.pdf" for soldering & handling details. 7.0 Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2.6 8 Cree PLCC4 1 in 1 SMD LED CLM2C-RCA/ACA Document No.: CREE-05-005 Rev. NO. : 16 NOTES * pick up SMD products during the process of SMT production . If handling is necessary, it should take careful to pick up these The following twoismethods necessary : The packaging sizes of these SMD products areproducts. very small and the resin still softare after solidification. Users are required to handle with care. Never touch the resin surface of SMD products. * To avoid damaging the product's surface and interior device, it is recommended to choose a special nozzle to pick up the SMD products during the process of SMT production. If handling is necessary, take special care when picking up these products. The following method necessary: Fig. 1a:isFor Small Top SMD Fig. 1b: For Mini side 0.8mm SMD For Small Top SMD series , it is recommended to use rubber material Nozzle to pick up SMD products figure size for reference : a.) Circular Nozzle: inner diameter: O1.8mm+/-0.05mm, outer diameter: O2.3mm+/-0.05mm. b.) Rectangle Nozzle: inner size: 1.3mm x 2.3mm, outer size > SMD size. 6. Electrostatic Discharge and Surge current Electrostatic discharge (ESD) or surge current (EOS) may damage SMD LED. Precautions such as ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling of S All devices, equipment and machinery must be properly grounded. It is recommended to perform electrical test to screen out ESD failures at final inspection. It is important to eliminate the possibility of surge current during circuitry design 7. Heat Management Heat management of SMD LED must be taken into consideration during the design stage of SMD LED applicatio current should be de-rated appropriately by referring to the de-rating curve attached on each product specification. Data is subject to change without prior notice. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 9 Cree PLCC4 1 in 1 SMD LED CLM2C-RCA/ACA PACKAGING * * * * * The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 2300 pcs per reel. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 10