TLP181GRL(TPL,F) - TOSHIBA - Datasheet.Directory

U1ZB6.8~U1ZB390

2011-01-05

TOSHIBA ZENER DIODE SILICON DIFFUSED TYPE

U1ZB6.8~U1ZB390

CONSTANT VOLTAGE REGULATION

TRANSIENT SUPPRESSORS

z Average Power Dissipation : P = 1.0 W

z Zener Voltage : VZ = 6.8 V to 390 V

z Surface Mounting Plastic Mold Package

ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)

CHARACTERISTIC SYMBOL RATING UNIT

Power Dissipation P 1.0 W

Junction Temperature Tj −40 to 150 °C

Storage Temperature Range Tstg −40 to 150 °C

Note: Using continuously under heavy loads (e.g. the application of high

temperature/current/voltage and the significant change in

temperature, etc.) may cause this product to decrease in the

reliability significantly even if the operating conditions (i.e.

operating temperature/current/voltage, etc.) are within the absolute maximum ratings.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report

and estimated failure rate, etc).

STANDARD SOLDERING PAD

Unit: mm

JEDEC ―

JEITA ―

TOSHIBA 3−4D1A

Weight: 0.06g

U1ZB6.8~U1ZB390

2011-01-05

ELECTRICAL CHARACTERISTICS (Ta = 25°C)

ZENER CHARACTERISTICS FORWARD

VOLTAGE REVERSE

CURRENT

ZENER

VOLTAGE

VZ (V)

ZENER

IMPEDANCE

rd (Ω)

TEMPERATURE

COEFFICIENT

OF ZENER

VOLTAGE

αT (mV / °C) VF (V) IR (μA)

TYPE

MIN TYP. MAX MAX

MEASURE-

MENT

CURRENT

IZ (mA) TYP. MAX MAX

MEASURE−

MENT

CURRENT

F (A) MAX

MEASURE−

MENT

VOLTAGE

R (V)

U1ZB6.8 6.2 6.8 7.4 60 10 3 4 1.2 0.2 10 3

U1ZB7.5 6.8 7.5 8.3 30 10 4 5 1.2 0.2 10 4.5

U1ZB8.2 7.4 8.2 9.1 30 10 4 6 1.2 0.2 10 4.9

U1ZB9.1 8.2 9.1 10.1 30 10 5 8 1.2 0.2 10 5.5

U1ZB10 9.0 10 11.0 30 10 6 9 1.2 0.2 10 6

U1ZB11 9.9 11 12.1 30 10 7 11 1.2 0.2 10 7

U1ZB12 10.8 12 13.2 30 10 8 13 1.2 0.2 10 8

U1ZB13 11.7 13 14.3 30 10 9 14 1.2 0.2 10 9

U1ZB15 13.5 15 16.5 30 10 11 17 1.2 0.2 10 10

U1ZB16 14.4 16 17.6 30 10 12 19 1.2 0.2 10 11

U1ZB18 16.2 18 19.8 30 10 14 23 1.2 0.2 10 13

U1ZB20 18.0 20 22.0 30 10 16 26 1.2 0.2 10 14

U1ZB22 19.8 22 24.2 30 10 18 28 1.2 0.2 10 16

U1ZB24 21.6 24 26.4 30 10 20 32 1.2 0.2 10 17

U1ZB27 24.3 27 29.7 30 10 23 36 1.2 0.2 10 19

U1ZB30 27.0 30 33.0 30 10 25 40 1.2 0.2 10 21

U1ZB33 29.7 33 36.3 30 10 26 41 1.2 0.2 10 26.4

U1ZB36 32.4 36 39.6 30 9 28 45 1.2 0.2 10 28.8

U1ZB43 38.7 43 47.3 40 7 33 53 1.2 0.2 10 34.4

U1ZB47 42.3 47 51.7 65 6 38 60 1.2 0.2 10 37.6

U1ZB51 45.9 51 56.1 65 6 43 68 1.2 0.2 10 40.8

U1ZB68 61.2 68 74.8 120 4 57 90 1.2 0.2 10 54.4

U1ZB75 67.5 75 82.5 150 4 66 104 1.2 0.2 10 60

U1ZB82 73.8 82 90.2 170 3 71 113 1.2 0.2 10 65.4

U1ZB100 90 100 110 300 3 87 138 1.2 0.2 10 80

U1ZB110 99 110 121 300 3 96 152 1.2 0.2 10 88

U1ZB150 135 150 165 450 2 136 212 1.2 0.2 10 120

U1ZB180 162 180 198 500 1.5 161 255 1.2 0.2 10 144

U1ZB200 180 200 220 170 269 160

U1ZB200−Y 190 200 210 170 269 160

U1ZB200−Z 200 210 220

500 0.5

178 286

1.2 0.2 10

168

U1ZB220 198 220 242 200 309 176

U1ZB220−Y 210 220 230 200 309 176

U1ZB220−Z 220 230 240

5000 0.5

207 320

1.2 0.2 10

184

U1ZB240 216 240 264 215 325 192

U1ZB240−Y 230 240 250 215 325 216

U1ZB240−Z 240 250 260

5000 0.5

225 338

1.2 0.2 10

225

U1ZB6.8~U1ZB390

2011-01-05

ZENER CHARACTERISTICS FORWARD

VOLTAGE REVERSE

CURRENT

ZENER

VOLTAGE

VZ (V)

ZENER

IMPEDANCE

rd (Ω)

TEMPERATURE

COEFFICIENT

OF ZENER

VOLTAGE

αT (mV / °C) VF (V) IR (μA)

TYPE

MIN TYP. MAX MAX.

MEASURE-

MENT

CURRENT

Z (mA) TYP. MAX MAX

MEASURE−

MENT

CURRENT

F (A) MAX

MEASURE−

MENT

VOLTAGE

R (V)

U1ZB270 243 270 297 243 385 216

U1ZB270−X 250 260 270 221 350 234

U1ZB270−Y 260 270 280 228 362 243

U1ZB270−Z 270 280 290

5000 0.5

236 374

1.2 0.2 10

252

U1ZB300 270 300 330 270 428 240

U1ZB300−X 280 290 300 244 388 261

U1ZB300−Y 290 300 310 253 402 270

U1ZB300−Z 300 310 320

5000 0.5

261 415

1.2 0.2 10

279

U1ZB330 297 330 363 296 470 264

U1ZB330−X 310 320 330 270 428 288

U1ZB330−Y 320 330 340 278 441 297

U1ZB330−Z 330 340 350

5000 0.5

287 455

1.2 0.2 10

306

U1ZB390 351 390 429 10000 0.5 350 555 1.2 0.2 10 312

U1ZB6.8~U1ZB390

2011-01-05

MARKING

Abbreviation Code Part No.

6.8 U1ZB6.8

7.5 U1ZB7.5

8.2 U1ZB8.2

9.1 U1ZB9.1

10 U1ZB10

11 U1ZB11

12 U1ZB12

13 U1ZB13

15 U1ZB15

16 U1ZB16

18 U1ZB18

20 U1ZB20

22 U1ZB22

24 U1ZB24

27 U1ZB27

30 U1ZB30

33 U1ZB33

36 U1ZB36

43 U1ZB43

47 U1ZB47

51 U1ZB51

68 U1ZB68

75 U1ZB75

82 U1ZB82

100 U1ZB100

110 U1ZB110

150 U1ZB150

180 U1ZB180

200 U1ZB200

200Y U1ZB200-Y

200Z U1ZB200-Z

220 U1ZB220

220Y U1ZB220-Y

220Z U1ZB220-Z

240 U1ZB240

240Y U1ZB240-Y

240Z U1ZB240-Z

270 U1ZB270

270X U1ZB270-X

270Y U1ZB270-Y

270Z U1ZB270-Z

300 U1ZB300

300X U1ZB300-X

300Y U1ZB300-Y

300Z U1ZB300-Z

330 U1ZB330

330X U1ZB330-X

330Y U1ZB330-Y

330Z U1ZB330-Z

390 U1ZB390

U1ZB6.8~U1ZB390

2011-01-05

Handling Precaution

The absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be

exceeded during operation, even for an instant. The following are the general derating methods that we recommend

when you design a circuit with a device.

P: We recommend that the worst case power dissipation be no greater than 50% of the absolute

maximum rating of power dissipation. Carry out adequate heat design.

PRSM: We recommend that a device be used within the recommended area in the figure, PRSM-tw.

Tj: Derate this rating when using a device in order to ensure high reliability. We recommend that the

device be used at a Tj of below 120°C.

Thermal resistance between junction and ambient fluctuates depending on the device’s mounting condition. When

using a device, design a circuit board and a soldering land size to match the appropriate thermal resistance value.

Organic silicon is used as encapsulation material for this product, which is resin seal product. Therefore, it is

difficult to seal siloxane coming from silicone completely in this product. When using this product, please consider

above.

Please refer to the Rectifiers databook for further information.

U1ZB6.8~U1ZB390

2011-01-05

U1ZB6.8~U1ZB390

2011-01-05

RESTRICTIONS ON PRODUCT USE

• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively “Product”) without notice.

• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.

• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the

Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of

all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes

for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the

instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their

own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such

design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,

diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating

parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR

APPLICATIONS.

• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring

equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.

Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or

reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious

public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used

in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling

equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric

power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this

document.

• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

• Do not use or otherwise make available Product or related software or technology for any military purposes, including without

limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile

technology products (mass destruction weapons). Product and related software and technology may be controlled under the

Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product

or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.

• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of

noncompliance with applicable laws and regulations.