1997 Nov 04 223
Philips Components Product specification
Miniature ceramic plate capacitors Class 1, 1000 V (DC)
(flanged types)
FEATURES
•High reliability
•High-frequency circuits
•High stability
•Space saving
•High temperature circuits
•Professional circuits.
APPLICATIONS
In a great variety of electronic circuits,
e.g. in filters and tuning circuits where
stability and low losses are a
requirement. Because of their small
size the capacitors are suitable for
use in circuitry with high component
density such as SMPS.
DESCRIPTION
The capacitors consist of a thin
rectangular ceramic plate, both sides
of which are metallized, and tinned
connecting leads are secured using a
high melting point solder. The
capacitors are encapsulated in epoxy
lacquer, which is resistant to all
commonly used cleaning solvents.
They have small dimensions and
narrow tolerances on the lead
spacing. The leads are provided with
a flange, which guarantees that the
leads are free of lacquer, and its
shape allows soldering gasses to
escape freely, ensuring excellent
solderability. This makes the
capacitors suitable for both
hand-mounting and automatic
insertion. The electrical properties are
characterized by low losses, a narrow
tolerance on capacitance
(±0.25 pF or 5%), high stability and,
owing to the absence of silver, an
extremely good DC behaviour.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Capacitance range (E12 series) 0.47 to 150 pF
Rated DC voltage 1000 V
Tolerance on capacitance ±5% or ±0.25 pF
Temperature coefficient SL (+150 to −1500 ×10−6/K)
Sectional specification IEC 384-8
Climatic category (IEC 68) 55/150/56
MAM035
Fig.1 Outlines.
1997 Nov 04 224
Philips Components Product specification
Miniature ceramic plate capacitors Class 1, 1000 V (DC)
(flanged types)
MECHANICAL DATA
Fig.2 Component outline.
MSA531
W0.6 5.08
H
L
O 0.6 0.06
0.05
5.08 0.5
0.1
Dimensions in mm.
For dimensions H, L and W see Tables 1 and 2.
Fig.3 Detail of flange.
Dimensions in mm.
handbook, halfpage
MSA534 - 1
0.2
0
1.4
0.2
0.4
0.1
1.0
0.25
0.03
0.03
0
0.05
Marking
The body of the capacitors is coloured tan. Capacitance
value and voltage are indicated by a marking code in a
contrasting colour on the body. Refer to Tables 3 and 4 for
colour and marking codes.
Mounting
When bending, cutting or flattening, the leads should be
relieved of the applied load by supporting them at the
capacitor body.
Soldering conditions:
max. 265 °C, max. 10 s.
The capacitors are suitable for mounting on printed-circuit
boards (hand-mounting or automatic insertion).
Physical dimensions
Table 1 Capacitor dimensions and mass
Notes
1. Unless indicated in Table 4, the thickness of the
capacitors does not exceed 3 mm.
2. Tolerances are given between parentheses.
SIZE(1) W(2)
(mm) H(2)
(mm) MASS
(g)
I 3.6 (−1.1) 6.3 (−1.8) ≈0.14
IIA 3.9 (−1.4) 6.7 (−2.0) ≈0.15
IIB 4.5 (−1.8) 7.3 (−2.4) ≈0.15
III 5.3 (−1.8) 8.1 (−2.6) ≈0.17
IV 6.2 (−2.0) 9.0 (−2.7) ≈0.20
V 6.2 (−2.0) 11.2 (−3.1) ≈0.23
1997 Nov 04 225
Philips Components Product specification
Miniature ceramic plate capacitors Class 1, 1000 V (DC)
(flanged types)
PACKAGING
For details refer to this handbook, Chapter
“Miniature ceramic plate capacitors”
, Section
“General data”
.
ORDERING INFORMATION
Table 2 Catalogue numbers
Notes
1. Catalogue numbers to be completed by adding the last 3-digit suffix for required capacitance value, see Table 4.
2. H0= 18.25 mm.
Table 3 Conditions for Table 4; capacitors with temperature coefficient SL
PITCH
P
LEAD
DIAMETER
d
CATALOGUE NUMBERS(1)
BULK PACKED ON TAPE
(REEL) ON TAPE(2)
(AMMOPACK)
L≥13 mm L = 4 ±0.5 mm
5.08 mm
(0.2 inch) 0.6 mm
(0.024 inch) 2222 694 09... 2222 694 19... 2222 694 53... 2222 694 63...
DESCRIPTION VALUE
Capacitance range 0.47 to 150 pF (E12 series)
Temperature coefficient of the capacitance +150 ×10−6/K to −1500 ×10−6/K
Marking colour of the temperature coefficient none
∆C
C∆T
------------
1997 Nov 04 226
Philips Components Product specification
Miniature ceramic plate capacitors Class 1, 1000 V (DC)
(flanged types)
Table 4 Preferred capacitance range, temperature coefficient SL
Notes
1. Other capacitance values and tolerances are available on request.
2. The voltage code may be marked on the front or rear side of the capacitor.
CAPACITANCE
VALUE(1)
(pF) TOLERANCE SIZE
(see Table 1)
MARKING CODE SUFFIX OF
CATALOGUE
NUMBER
(see Table 2)
VALUE VOLTAGE(2)
0.47 ±0.25 pF I p47 1 kV 477
0.56 ±0.25 pF I p56 1 kV 567
0.68 ±0.25 pF I p68 1 kV 687
0.82 ±0.25 pF I p82 1 kV 827
1.0 ±0.25 pF I 1p0 1 kV 108
1.2 ±0.25 pF I 1p2 1 kV 128
1.5 ±0.25 pF I 1p5 1 kV 158
1.8 ±0.25 pF I 1p8 1 kV 188
2.2 ±0.25 pF I 2p2 1 kV 228
2.7 ±0.25 pF I 2p7 1 kV 278
3.3 ±0.25 pF I 3p3 1 kV 338
3.9 ±0.25 pF I 3p9 1 kV 398
4.7 ±0.25 pF l 4p7 1 kV 478
5.6 ±0.25 pF l 5p6 1 kV 568
6.8 ±0.25 pF l 6p8 1 kV 688
8.2 ±0.25 pF l 8p2 1 kV 828
10 ±5% l 10p 1 kV 109
12 ±5% l 12p 1 kV 129
15 ±5% l 15p 1 kV 159
18 ±5% IlA 18p 1 kV 189
22 ±5% IlA 22p 1 kV 229
27 ±5% llB 27p 1 kV 279
33 ±5% llB 33p 1 kV 339
39 ±5% llB 39p 1 kV 399
47 ±5% llI 47p 1 kV 479
56 ±5% llI 56p 1 kV 569
68 ±5% llI 68p 1 kV 689
82 ±5% IV 82p 1 kV 829
100 ±5% IV n10 1 kV 101
120 ±5% V n12 1 kV 121
150 ±5% V n15 1 kV 151
1997 Nov 04 227
Philips Components Product specification
Miniature ceramic plate capacitors Class 1, 1000 V (DC)
(flanged types)
ELECTRICAL CHARACTERISTICS
The capacitors meet the essential requirements of
“IEC 384-8”
. Unless stated otherwise all electrical values apply at an
ambient temperature of 20 ±1°C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 63 to 67%.
Note
1. Including 2 mm per connecting lead.
DESCRIPTION VALUE
Capacitance values (note 1) measured at 1 MHz, ≤5 V see Table 4
Rated DC voltage 1000 V
DC test voltage; duration 1 minute 2000 V
DC test voltage of coating; duration 1 minute 2000 V
Insulation resistance at 500 V (DC) after 1 minute >10000 MΩ
Tan δ (note 1) measured at 1 MHz, ≤5V:
C≤50 pF
C>50 pF ≤15 ×10−4
Category temperature range −55 to +150 °C
Storage temperature range −55 to +85 °C
Climatic category (IEC 68) 55/150/56
15≤
1
5
C
------ 0.7+
10 4–
×
Fig.4 Typical impedance Z as a function of frequency.
handbook, full pagewidth
MLB870
103
102
101
104
10 2
10
1
102
f (MHz)
IZI
(Ω)
10 1
103
10 pF
100 pF
